Noah S Ark 120w Led Grow Lights For Hydroponics Plants - Chinaprice: contact company for price
I. Double cages structural heat dissipation design, better
The double cages structural design change the heat
dissipation mode of the traditional LED grow light, divide
the inside of the lamp to tow parts, and form two heat-
dissipation cages, cut off the internal thermal cycle
effectively and reach the best cooling performance.
Use the unique air- out design and open air exhaust in the
two sides of the lamp, remove the high temperature air
rapidly, ensure the light body operation in a low-
II. Prevent drippage water design
The lid of the light is with sloping ends and 5°angled
holes to prevent the light from the damaging of drippage and
III. High quality 3W LED+700mAcurrent=The top performance
700 mA is the best drive current for 3W LEDs, runing LEDs
with possibly high current can take full advantage of LEDs,
making your initial investment in LED devices to be well
worth it. However, LEDs and LED drivers should be of superior
quality as so to undertake the high electric current,
besides the entire equipment should be good enough in heat
dissipating to bear all the heat emitted by 3w leds. Selects
the finest LEDs and drivers to ensure the stable performance
as well as the long life span of the fixtures, our three- year
warranty policy proves our confidence in products.
IV. Modularity design
Modularity design, each part interconnect by the male female
plug directly, very easy for repairment and maintenance,
only few steps to assemble up the whole fixture.
V. RTPM intelligent control system（ Remote, Dimming, Timing
and Temperature control）
RTPM is a multifunction intelligent system, including
remote, dimming, timing, custom temperature control and
mult- unit chaining function. In order to meet the growth
demand of all kinds plants, the users can choose various
different lighting effect scheme.
1、 Remote- controlled, dimming and timing
There are three controllable circuits in the light, the
brightness value is 0% - 100% , in order to add and reduce the
adjustable brightness , 1% or 10% is available, also, 1% is
allowed to adjust the brightness in the single circuit. Four
time bucket can be set on brightness in each circuit. In the
right system time setting circumatances, when the time reach
timing time bucket, the hole light will turn into the timing
preinstall brightness automatic. ， 24 hours continuous cycle.
（ Please see the remote operation instruction manual )
2、 Temperature control and protection
When the heat sink temperature over 65℃ , the intelligent
temperature control will cut off the power supply system
automatic. The system will outo star when the temperature
cooling to 50°.
3、 Data memory
The brightness and timing setting will auto- save after
setting 45 seconds, the lamp will enter the setting
brightness condition last time when it electrify and get to
work next time. The system time will keep the clock
continuous operation about 3 months after the lamp
completely without electricity, the built- in superbattery
will be full charged within 20 seconds. Also, it without
needing battery replacements.
Name: 120W LED Grow Light Actual power: 120W
Model: CDL- G- ZA120W- B LED Qty: 60pcs* 3W
Input voltage: AC100~240V LED color:
Red( 630nm) / Blue( 460nm)
Output voltage: DC70~90V Lifespan: 50, 000 Hours
Input current: 690mA Brightness value: 0% ~100%
Low voltage impulse: 400us PF: 0.9
Control system: RTPM Working frequency: 50~60Hz
Circuits: 2 Working environment: - 20~40℃ ，
45% ~95% RH
Product size: 288* 280* 75mm N. W. : 3.7kg
Inner carton size: 346* 346* 150mm G. W. ( Inner carton ) :
Outer carton size: 612* 358* 362mm/ 4pcs G. W. ( Outer
carton ) : 18.6kg
Standard configuration: LED Light x1, Remote control x1, Power
line x1, Chaining x2, Remote control operating instruction x1
Remarks : The above parameter is based on Red: Blue=8: 1, for
Illumination and PAR value data sheet
Height( cm) 20 40 60 80 100
PAR ( umol m- 2s- l) 2050 750 380 200 130
Irradiation Area( m^2) 0.2 0.45 0.8 1.35 2
( Remarks: the irradiation area is base on PAR value＞ 10 )
1. Changed mesh vents to hollow out, increase the air
displacement and the cooling capacity per unit time, more
convenient for carrying.
2. Using built- in quiet fans, and use the shutter in the
wind, induced draft from all sides, very low noise,
waterproof and dustproof, waterproof grade can reach IP32.
3. Special structure make the heat dissipation effect very
good, the temperature of the LEDs' feet dropped below 50°,
lowest bad loss rate of the lamp bead.
4. Use advanced isolation power supply and soft start
protection technology, to prevent the high voltage when turn
on the light from damaging the lamp body.
1. Use high quality LED lighting source, the lifespan is up
to 50000 hours.
2. Replace 3~5 times of the HPSL power, 80% electric energy
saving than the tradition HPSL and MHL.
3. High lighting effect, 90% of the light will be absorbed
by the aquatic plant, but to the traditional HPSL and MHL,
the lighting effect is just 8% ~10% .
4. Input cooling system, well solve the heat sink problem.
5. The input voltage is AC100V~240V， suitable for the world
standard. Built- in power supply. No need other equipment,
just access AC100~240V voltage from the plug, the lamp will
be working smoothly, don' t need the reflector and ballast
6. The lighting area and the height are changeable according
to different plants and environments, the same as the
7. Environment- friendly, no mercury and other harmful heavy
8. Customers can choose the different ratios, Our suggestion
is red: blue=8: 1 or 7: 2, red: blue: orange=7: 1: 1. The
suggested wavelength of the red is 620- 630nm, the blue is
460- 470nm and the orange is 610- 615nm. With the mixture of
red , blue, orange, yellow, UV, IR and white lights, provide
the plants needed nutrient light. The red LEDs are good for
sprouting and flowering, while the blue LEDs promote the
growth, at the same time, customers also can choose the more
suitable wavelength and LED colors.
Ideal for all phases of plant growth, and works well with
water solution culture and soil culture. Can be used in
house garden, pot culture, garden, sowing, breeding, farm,
flower exhibition, bonsai, garden, green house,
sowing, breeding, farm, greenhouse cultivation, water soluble
breeding, greenhouse cultivation, pipeline cultivation and
1. In order to save energy, please turn off the power if not
use the lamp in a long time.
2. Do not use the lights in dripping water or anywhere where
they will get wet, water and electricity can be a dangerous
3. The working environment for the light is
- 20~40℃ , 45% RH~90% RH.
4. To protect the light, Pls cut off the power when there is
a lightning strike.
5. Don’t touch or move when the light working.
- Phone: 862154296136
- Address: Shanghai pudong new area of the federal building, , shanghai, China
Published date: May 12, 2014 -
- Business Description: Shanghai CIDLY Optoelectronics Technology Co., Ltd. was established in
2009 with registered capital of 1 million, covers an area of over 10,000
square meters, the workshop occupies more than 2000 square meters, the
company's existing staff of 200 people. Our company specializes in the
production of leds led grow lights. Plants lantern. Hydroponic grow
lights. Led organic gardening hydroponic lighting. LED plant factory
lighting. Led indoor lighting to grow. Hydroponic lighting . LED grow
Light hydroponic plants. hydroponic led lights. greenhouse plant lights.
garden plant lights. grow lights. plants fill light. floral lights.
nursery tissue culture lights. crop seeds lights. plant wall lights.
plant seedlings leaf stage special light (fill light). families balcony
plants fill light and led aquarium lights. coral fill light. aquarium
lights. plants lights. aquarium lights, suitable for any plant growth
period, and for water or soil is valid. Suitable for indoor gardens,
potted plants, garden, planting, breeding, farm, spray plant, greenhouse
farming, water soluble farming, flower farming, greenhouse farming,
cultivation pipeline, etc. Cidly is strictly implementing the
international quality control system in production Sales of all products
have passed CE, ROHS, FCC, PSE certification
Pre Peeling ConveyorAgriculture - Qingdao Zhong Bang Hao Tong Machinery Limited - China - May 21, 2016 - contact company for price
Application: As the auxiliary equipment of large slaughter plant, it is mainly applied to the manual pre- skinning, head and trotter removal etc. Pre- peeling Conveyor Features: 1. Complemented with skinning machine 2. Being installed on the front si...
Belly Supporting Type Pig Stunning ConveyorAgriculture - Qingdao Zhong Bang Hao Tong Machinery Limited - China - May 21, 2016 - contact company for price
belly supporting type pig stunning conveyor, It is a conveying equipment for alive pigs hoisting, and it can be used together with Manual Electric stunning machine. It is also suitable for the medium and small factories and has the advantages of smal...
Pneumatic Reverse CaseAgriculture - Qingdao Zhong Bang Hao Tong Machinery Limited - China - May 21, 2016 - contact company for price
It is the professional cattle slaughter equipment, mainly used to turn the cattle over after electric stunning or gun stunning of it, and then hang the cattle by chaining the leg. It will be more effective while working with the cattle leading machin...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"