25 visiting now: 12 France France flag 7 China China flag 5 USA USA flag 1 Germany Germany flag

Fuel Injector Tester - China

price: contact company for price

Ⅰ, Technical Parameter Dimensions: 510mm × 500mm × 450mm

Weight: 30kg Power: 85-132vac/170-264vac 47-63Hz Fuel tank capacity:

4.5L Test tube capacity: 120CC Ultrasonic wave frequency: 25KHz

Ultrasonic wave power: 100W Rotate speed: 0-9975r/min, step: 25r/min

Pulse width: 0-30ms, step: 0.1ms Count: 0-9975r, step: 25r Time: 0-

9975S, step: 5S System pressure: 0-6.2kg/c㎡ (variable

regulated System flow: 4L/min Test cylinder: 8 (max)

Ⅱ, Specifications & Functions

ECCOM Fuel Injector tester & Cleaner mainly

apply to fuel injector testing, cleaning and

quality analyze. The functions as following:

To test and analyze the injecting state.
To test the injector dribbling.
To test the injecting angle and atomizing.
To test the injecting volume.
To test the injector uniformity.
To test conduct the physical and chemical
cleaning of the blocked or trouble injector, ultrasonic cleaning, test cleaning and on-vehicle cleaning.
To test the open and close injecting pressure of the injector.
Can clean the engine without dismantling
(choose matched connector).
Can operate the auto static test, dynamic
test and selective test with the injecting
dribbling, angles, atomization, uniformity of one or more(1-8) injectors, can simulate any state of the vehicle to observe the complete process of injectors.
Can operate automatically, reversely, and

ultrasonic cleaning with one or more

injectors at different

state, such as high resistor, low resistor,

electric voltage and electric current.

11: Can test by count mode and timing mode,

also have backlight, can observe the

injectors clearly.

12: If use new type injector, just need

choose the matched connector and replace the

O-ring.

13: It adopts to united design of

microcomputer skill and intelligent engine,

and suppose driving power and specified

injecting protection system, ensure to

operate the test and clean at any mode such

as high resistor, low resistor, electric

voltage and electric current.

14: Have powerful, safe and time ultrasonic

cleaning system.

15: It uses environmental protective and safe

test fluid and cleaning detergent, accords

with Montreal Agreement, innocuous, with no

peculiar smell, non-volatile and can be

reclaimed repeatedly and effective, it’s

innocuous with the operators.

Feel free to contact us with all your questions


Company Contact:


  • Phone: 860203678701036787280

  • Address: Zhangcun Industry District,shijing,Guangzhou City, Guangzhou, China

  • Email: Email


Published date: September 18, 2012 -

  • Business Description: Our company is a professional manufacturer in China, and we have ready

    provided more than twelve years experience of selling, producing and

    exploring the fuel injector cleaner and analyzer.

    2007, we explored motorcycle injector tester machine for Taiwan.

    2010, we explore LPG injector tester and cleaner machine for GM DAEWOO in Korea, this machine passed NIKKI company's testing, and the parameter are all supplied by NIKKI .

    2010, we also explored special injector testing and cleaning machine for modified car in Japan.

    2011, we are exploring GDI(Gasoline Direct Injector) tester and cleaner machine.

    Now let me introduce our products. We have two brand products: ECCOM and Injector tester (IT brand). ECCOM is our own logo. We have:

    A model: ECM A8/A6L/A4L,

    V model: ECM V8/V6/V4,

    B model: ECM B8/B6/B4,

    M model: ECM M8/M6/M4,

    X model: ECM X8/X6/X

    IT Brand have:

    E model: IT E4/E6/E8,

    A model: IT A4/A6/A8,

    And our parts most of them we use import parts. Like adaptor, we use Rectus made in Germany,(The model NO. ESP200 in BOSCH Company also use this kind of adaptor) it can use 20000 times no leaking oil.

    Switch we use very good quality made in Taiwan.

    And the wheel we use Supo made in China by Germany Company. The tank we use stainless steel material. It can keep oil no leaking because of the damage.

    The panel s thickness is 2.3 2.5mm. Other material is 1.1 1.2mm.

    The solenoid is very good quality, we cooperate with the supplier for 8 years.

    The Fuel Pump, lighter we also use high quality.

    ECCOM brand are suitable for top feed and side feed injector. And Injector Tester and Cleaner only can use top feed, if customer need side feed, we also can adapt it for them.

Related listings



  • China Good Quality Car Baking Oven Drying Room With Ce
    China Good Quality Car Baking Oven Drying Room With Ce
    Automobile - Accessories - Cleaning / Waxing - Shandong King Mechanical Coating Technology Co,.Lt - China - September 25, 2015 - contact company for price

    Cabin system: EPS colorful steel skin panel, 75mm thick, steel 0.5mm thick, tongue groove style, compound construction, anti- flame and heat- insulation. Heating system: Carbon tube heater on the wall, 1kw/ 1pic, explosion- proof, service time≥6000...

  • Kx Sp3200b High Performance Car Paint Booth With Ce Certification
    Kx Sp3200b High Performance Car Paint Booth With Ce Certification
    Automobile - Accessories - Cleaning / Waxing - Shandong King Mechanical Coating Technology Co,.Lt - China - September 25, 2015 - contact company for price

    Why Choose Us? Advantages we have: A. Experienced powder coating equipment supplier B. Professional engineers team and sales department for your service C. Factory recognized by ' CE ' and ' ISO 9001' Benefit you get: A. Stable quality - Coming from ...

  • 2015 Good Quality Car Spray Booth Baking Oven Drying Room
    2015 Good Quality Car Spray Booth Baking Oven Drying Room
    Automobile - Accessories - Cleaning / Waxing - Shandong King Mechanical Coating Technology Co,.Lt - China - September 25, 2015 - contact company for price

    Filter frame: Plastic spraying square steel pipe Filter: Dual filtering structure, the primary filter can capture granules larger than 10μm. Ceiling filter capture granules bigger than 5μm. Its filtering rate reaches 98% . Basement: 3* 3flat iron, ...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"