Excellent Adhesiveness Silicone Glue For Solar Cells - Chinaprice: 10.00 Dollar US$
INSTRUCTIONS METHOD OF OPERATION
1. Clean surface: cleaning adhesion surface and to remove the rust, dust and greasy dirt, etc.
2. After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.
3. Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within 24 hours (at room temperature and 55% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.
Before The Curing
Appearance White Paste
Tack Free Time ≤10 (min)
Extrudability 5~11 (g/s, 25℃)
Cure Time 3~7(d)
After the curing
Relative Density 1.40~1.45 (g/cm3)
Tensile Strength ≥2.5 (MPa)
Break Elongation ≥500 (%)
Shear Strength ≥2.0 (MPa)
Hardness 45~55 (Shore A)
The Temperature Range -60~200 (℃)
Volume Resistivity 2.6×1015 (Ω·CM)
Dielectric Strength 20 (kV/·mm)
Dielectric Constant 3.12
Flame Retardant Grade UL94 HB
- Phone: +86 13728414609
- Address: Room 1206, Science Avenue 97, Guangzhou, Guangdong, China
- Website: http://www.usilicone.com
Published date: July 14, 2016 -
- Business Description: Our company has abundant experiences about R&D, especially we have advantage in clothing leather/ daily chemical/ paper making/ food and beverage/ medical treatment/ kitchen/ car accessory/ intellectual product and so on
Excellent Adhesiveness White Paste One Component SealantChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 14, 2016 - 9.00 Dollar US$
STORAGE 1, 6 months shelf life if stored below 25 ℃ in cool, dry place, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used. 2, These products don't belong to dangerous goods, so they...
Semi Transparent Rtv 1 Silicone Adhesive For Pcb CircuitChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 13, 2016 - 4.00 Dollar US$
Translucent/Semi transparent RTV-1 silicone adhesive for PCB circuit NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to re...
No Corrosion Transparent Potting Silicone Glue For Pcb Circuit Sealing CastingChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 13, 2016 - 10.00 Dollar US$
Before the curing Appearance A: Trasparent B: Blue Relative Density 0.96~1.00(g/cm3) Viscosity At 25℃ A:650~850 B:650~850 (mPa·s) After the curing Penetration Degree 240~280 Fire resistance Flameout Time <16s curing time <2h Complete time >4...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"