Silicone Glue For Solar Lighting And Power Equipment - Chinaprice: 3.00 Dollar US$
Our company is committed to providing superior solution about
silicone rubber for customers, we have long-term cooperation with
many famous customers of industry and listed company.
METHOD OF OPERATION
1. Clean surface: cleaning adhesion surface and to remove the rust, dust and greasy dirt, etc.
2. After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.
3. Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within 24 hours (at room temperature and 55% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.
- Phone: +86 13728414609
- Address: Room 1206, Science Avenue 97, Guangzhou, Guangdong, China
- Website: http://www.usilicone.com
Published date: July 8, 2016 -
- Business Description: Our company has abundant experiences about R&D, especially we have advantage in clothing leather/ daily chemical/ paper making/ food and beverage/ medical treatment/ kitchen/ car accessory/ intellectual product and so on
Manufacturer White Paste Silicone Adhesive With Good Water ProofChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 8, 2016 - 3.00 Dollar US$
NOTE After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of...
Rtv 1 Silicone Sealant For Pv Modules And Solar PanelsChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 7, 2016 - 3.00 Dollar US$
Name: RTV-1 silicone sealant for solar PV modules Usage: Solar power supply Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s, 25℃) Cure Time 3~7(d) After the curing Relative Density 1.40~1.45 (g/cm3) Tensile S...
Rtv 1 Silicone Sealant For Solar Power SupplyChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 7, 2016 - 3.00 Dollar US$
Name: RTV-1 silicone sealant for solar PV modules Usage: PV modules Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s, 25℃) Cure Time 3~7(d) After the curing Relative Density 1.40~1.45 (g/cm3) Tensile Strength ...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"