Silicone Potting Compound For Electronic Device - Chinaprice: 10.00 Dollar US$
Performance Indicators A B
Appearance Gray Fluid White Fluid
Viscosity 1500~2500(cps) 1500~2500(cps)
Mixed Viscosity 1500~2500(cps)
Operable Time 30~120(min) (Adjustable)
Curing Time 3~5(h)
After The Curing
Hardness 40~50(Shore A)
Dielectric Strength ≥20(kV/mm)
Dielectric Constant 3.12(1.2MHz)
Thermal Conductivity ≥0.6[W/m.k]
Volume Resistivity ≥1.0×1014(Ω·cm)
Specific Gravity 1.56±0.02(g/cm3)
Flammability Rating UL94 V-0
•20kg/set(A10kg+B10kg), packaging with bucket.
Power Equipment Power Supply Junction Box
1, The mixture should be sealed and stored in a dry environment at room temperature, and should be used as soon as possible, to avoid wastage.
2, The product don’t belong to dangerous goods, but avoid contacting skin and eyes.
3, The product is non-toxic, has good physical inertia without stimulation and harm. The product does not contain flammable and explosive ingredients which will not cause fire or explosion without special requirement for transport.
4, Stored for a period of time, the plastic may be layered. So please stir well before using, and can’t affect its performance.
5, The following substances may hinder the curing or cause the phenomenon of not cure, so it is used after simple experiments, and need to clean the site of application if necessary.
A, incompletely cured condensation type silicone rubber.
B.amine (amine) curable epoxy resin.
C. ash welding (solder-flux).
- Phone: +86 13728414609
- Address: Room 1206, Science Avenue 97, Guangzhou, Guangdong, China
- Website: http://www.usilicone.com
Published date: July 18, 2016 -
- Business Description: Our company has abundant experiences about R&D, especially we have advantage in clothing leather/ daily chemical/ paper making/ food and beverage/ medical treatment/ kitchen/ car accessory/ intellectual product and so on
Rtv White Single Component Sealant With Seismic ResistanceChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 18, 2016 - 3.00 Dollar US$
Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5(MPa) Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35~45(Shore A) Temperature Range -60~200...
Transparent Potting Of Smidahk For Electronic ComponentChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 18, 2016 - 10.00 Dollar US$
Before the curing Appearance A: Trasparent B: Blue Relative Density 0.96~1.00(g/cm3) Viscosity At 25℃ A:650~850 B:650~850 (mPa·s) After the curing Penetration Degree 240~280 Fire resistance Flameout Time <16s curing time <2h Complete time >4...
Excellent Adhesiveness Rtv 1 Silicone Sealant For Solar GlassChemicals - Adhesives - Guangzhou Usilicone chemical material Co.,Ltd - China - July 16, 2016 - 3.00 Dollar US$
NOTE After operating, the rest of glue must be sealed to store, and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of ...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"