Mb 06 Base Lacquer Putty Thawing 25kg Loose - China

Features: This product is a new high-strength coating bottom ash, mainly

used for the leveling rough surface of cement mortar or concrete walls,

providing a good base surface for the layer lacquer putty, to reducing

the amount of surface lacquer putty and low down the project cost 1,

strong cohesive force, can be well attached to the base surface 2, has a

certain flexibility, can be a good buffer layer for different substrates

of stretching stress 3, excellent aging resistance and good ability of

anti-infiltration 4, environmental-friendly product, non-toxic, and

safety Surface Treatment: The substrate surface should be firm, dry and

clean, no grease, no wax, and other loose materials.

New plaster surface

should maintenance about twelve days before inserting the lacquer putty,

do not use cement paste for calendaring.

If the wall is too dry, wet the

wall before operation till there is no obvious water on the surface

Operation Process: 1, using appropriate amount of water (about 3: 1) to

transfer it into a paste (namely 25kg powder + 7.5kg water) 2, according

to the water-cement ratio, pouring the water into the stirring barrel,

adding the powder, using an electric mixer to make particle paste, put

it aside for a few minutes and then a little stirring to gain the better

effect 3, using point-mending method to repair the base side for those

large different places, after dry use a spatula evenly to spread the

slurry on the base surface, and control the thickness under 2mm.

4, dry

after 24h, can make the operation of the surface lacquer putty.

Technical Reference: Compression and shear bond strength≥1.2MPa

original tensile strength≥0.6MPa Waterproof tensile

strength≥0.5MPa Tensile strength resistance to freezing and

thawing≥0.5MPa Tensile strength of alkali ≥0.5MPa Heat-

tensile bond strength≥0.5MPa Normal Amount: about 1.5~2.0kg/m2,

according to the smooth of the surface Cautions: 1, never mix the dry

slurry with water and use again 2, this product requiring operating

under 5℃~40℃ situation, never operate under raining.

Store

Method: Store in cool and dry place, unopened product can be saved for

one year.

Packing: 2kg/bag, 25kg/bag

Mb 06 Base Lacquer Putty

Feel free to contact us with all your questions

Company Contact:

• Posted By: Guangzhou Mebong Architectural Decoration Co., Ltd

• Phone: 8613288806122

• Address: Room A601,Yangcheng Garden No. 438, zhongshan Road, Guangzhou , Guangdong China , China

• Email:

• Business Description: Guangzhou Mebong Architectural Decoration Co., Ltd. is a multi functional dry mortar manufacturer that is specialized in technical research, production, sale and service.
  
  Our business covers the whole country and the whole world.
  
  Mebong is the first to introduce the U.S. advanced dry mortar production technology and equipment in China, and provides new type environmentally friendly dry mortar products and advanced construction technology, aiming at making outstanding contributions to future industrial production and people's lives.
  
  "High quality and excellent service" has always been the goal of Mebong.
  
  In order to achieve the commitment of "providing good products and service for customers", Mebong has produced stable, lifelong, convenient and environmentally friendly dry mortar series products according to different environments and different needs.
  
  Mebong mortar has passed the national tests, and is in accordance with ISO9001: 2000 quality management system standards.
  
  For the future, Mebong will focus on the cooperation with partners in the field, and maintain the leading position in the international development strategy.
  
  We firmly believe that our company is bound to bring business partners good business opportunities and profits.
  
  Mebong would like to peer with the majority of construction materials to create another new field of the construction world.