25 visiting now: 9 USA USA flag 9 China China flag 3 France France flag 2 Netherlands Netherlands flag 1 Norway Norway flag 1 Georgia Georgia flag

Highlighted Companies

Sell Fb 1 Fireproof Coating Board - China

price: contact company for price

Applicable to: Counter-hole electrical, Cable shaft holes Installation

Instructions Preparation:

1. Clean the openings and keep the surface dry.

2. Clear off dust, greasy dirt, etc.in the cables and cable bridges. Keep the surface dry.

Installation of FB-1 fireproof board:

1.Mark clearly on the board the positions of penetrating objects. Cut and trim the board to appropriate shapes and sizes corresponding with the shapes and sizes 0f holes and penetrating objects by using a knife and saw.

2. Apply the FS-E or FS-I on the surface of penetrating objects that contacts with the board.

3. Apply the FS-E on areas surrounding the holes and the board.

4. Put the trimmed board into the holes and keep its surface flat with the surface of base materials. Seal the edges with FS-E application.

5. Fill the mineral wool into any leaking fissures (like that between the board and cables).then seal them up with FS-E or FS-I.

6.Apply the FP-C coating on both sides of the board to a thickness of 0.5mm respectively, reaching the certified standard of thickness of 1mm of both sides.

7. Appbthe FP-C coating on both sides of the penetrating objects (including a structure’s parts) to a thickness of 200mm respectively, so as to ensure the completeness of the system.

InStructions concerning certification standard:

Choose appropriate systems corresponding with different firepmaf effective time

Sing-board system (one board, 50mm in thickness)

Double-board system (two boards. 100mm in thickness)


1.For double-board system, install the second board with the same procedures as that for the first. The board shall be flat with the base materials in the back. The two boards can also be glued together with FS-E or FS-I.

2.If any positions on the board with pre-applied coating are damaged, repair them by applying the FP-C coating to restore the thickness of pre-application coating.

Technical Index

Under 23℃ temperature and 50% relative humidity



Size (thickness*width)


Thickness of FP-C pre-application on the board surface

0.5mm (thidcness when dry)

Thickness of FP-C follow-up application

0.5mm)(thickness when dry)-0.7mm (thickness when suet)

Density of the coating board

大于150kg/㎡ (thickness when dry)

Sell Fb 1 Fireproof Coating Board

Thank you in advance for your consideration

Company Contact:

  • Phone: 13815475565

  • Address: 13-16F,NO. 45 EAST ZHONGSHAN ROAD, ZHENJIANG, China

  • Email: Email

Published date: September 7, 2012 -

  • Business Description: we are a leading group company in Jiangsu province, we have 3 branch aluminum factories.

    Our 3 aluminum branch factories could produce different kinds of aluminum coil, plate, foil, tread plate and circles;

    Our company has more than ten years' history. The amount that we exported in 2006 was USD120,000,000, which makes us a key Group Company in Jiangsu Province.

    Our hardware branch company could produce different of nails and hardware.

    Your interests and cooperation are expected and highly appreciated.

Related listings

  • Btchem Uv Cured Coatings For Wood Floor Scratch Resistance Durability
    Btchem Uv Cured Coatings For Wood Floor Scratch Resistance Durability
    Chemicals - Coatings - BT CHEM - Vietnam - September 7, 2012 - contact company for price

    BTCHEM UV Cured Coatings for Wood Floor is the product system that is specially is required more advanced properties: high durability; superior hardness and flexibility; scratch, mar and abrasion resistance. Btchem Uv Cured Coatings For Wood Floor Pl...

  • Glass Frosting Powder
    Glass Frosting Powder
    Chemicals - Coatings - zhenhzhou yuke glass technology co.,ltd. - China - September 7, 2012 - contact company for price

    Glass frosting powder is an acid based material used to process the glass products, such as glass bottles, flat glass, borosilicate glass, glass lamps, etc., it can make the glass surface more elegant and obscurer, which improves its value and makes ...

  • Yk Wine Bottle Glass Frosting Powder
    Yk Wine Bottle Glass Frosting Powder
    Chemicals - Coatings - zhenhzhou yuke glass technology co.,ltd. - China - September 7, 2012 - contact company for price

    Products Name: YK-I bottle glass frosting/etching powder. 2. Adopting Standards: ISO14001: 2004 EMSC and ISO 9001: 2008 QMSC 3. Specifications: 25kg/bag 4. HS Code: 3824909990 5. Package: Plastic bag 6. The Minimum Order: 1 T. 7. Delivery Time: 20-60...

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"