Frp Mortar Pipe - China

FRP Mortar Pipe 　　FRP pipe is consisting of resin (select food grade resin for transmitting drinking water), glass fiber and quartz sand, manufacture uses a special process.

Its operating temperature is below 80 ℃, suitable for various soil.

Suitable field: 1 - Potable water transmission; 2 - Sewage disposal; 3 - seawater transmission; 4 - Power plant circulating water piping; 5 - Chemical corrosion m edia transmission; 6 - Oil and gas transmission; 7 - agricultural irrigation.

　　Advantages: 1 - Perfect corrosion resistance, no effect on water quality:

　　FRP pipes can be resistant to acid, alkali, salt, sea water, sewage without treatment, corrosive soil or groundwater, and erosion from various chemical fluids.

　　2) Anti-fouling and anti-moth:

　　The surface of unsaturated polyester resin is clean and smooth; it will not be defiled or attached by microorganism such as armour shellfish and fungus in the ocean sewage.

　　3) Good heat resistance and frost resistance:

　　In -30℃ condition, mortar pipe still has good toughness and high strength; it can be use in the range of minus 50℃ to 80℃ for a long term, it can also used in temperature above 110℃ condition with a specially formulated resin.

　　4) Light weight, high strength, easy transportation and installation;

　　Specific gravity of mortar pipe is 1.65-2.0, is only 1/4 of steel’s, hoop tensile strength is 180-300MPa, axial tensile strength is 60-150MPa, using socket connection, easy transportation and installation.

　　5) Small frictional resistance, high transmission capacity:

　　Inner wall of FRP pipe is very smooth.

Roughness coefficient is 0.0084, but concrete pipe is 0.014 and cast iron pipe is 0.013 - FRP pipe can significantly reduce the fluid pressure loss along the way and increase transmission capacity.

　　6) Good electrical and thermal insulation:

　　Insulation resistance is in the range from 1012 to 1015Ω.

cm, heat transfer coefficient of FRP material is very small, only 0.23.

　　7) Good wear resistance:

　　8) Low maintenance costs:

　　No need precaution and maintenance for rust-proof, stain resistant, insulation and thermal insulation.

No need cathodic protection for underground pipe, which saving more than 70 percent of the engineering and maintenance costs.

　　9) Good adaptability:

　　Design pipe with different pressure class and stiffness based on client’s specific requirements.

　　

Company Contact:

• Posted By: Jizhou zhongying frp co,ltd.

• Phone: 86-0318-8638158

• Address: No. 14，Nanqiao street, Jizhou city, Hebei province, China, Hengshui , Hebei , China

• Email:

• Website: http://www.jzfrp.cn

• Business Description: JIZHOU ZHONGYI FRP Co., Ltd. was set up in 1986, introduced the technology and
  
  equipment from Italy and became Chinas first professional company who provide
  
  filament-wound products in 1986.
  
  Through learning and developing advanced technology, relying on independent
  
  research and development, and cooperating with relevant scientific research
  
  departments, ZHONGYI got many technical achievements.
  
  Especially in design,
  
  fabrication and installation of fiber glass reinforced plastic vessels, towers, process pipe
  
  and mortar pipe.
  
  ZHONGYI technology had achieved the leading level in the
  
  domestic.
  
  ZHONGYI have the manufacturing ability to meet the requirement of relevant
  
  international standard.
  
  
  
  After 31 years of unremitting efforts, our company's technology level and
  
  product quality had a continuously improve, production and operation has expanded
  
  steadily.
  
  ZHONGYI has three companies (A&Z, ZHONGYI TEC.
  
  , Guangzhou Xinhui)
  
  and four plants , with a total area of over 250000 square meters, ZHONGYI main
  
  products are fiber glass reinforced plastic storage tanks and mortar pipe .
  
  ZHONGYI
  
  also has more than 20 patents of Coal chemical fiber glass reinforced plastic tank, large diameter flue preparation device, jacketed fermentation tank and so on, ZHONGYI had become China's first-class enterprise specialty in fiber glass reinforced plastics.
  
  Product specifications: DN25000mm the following series of FRP pipe, tank and
  
  DN15mm - 12000 mm annual production capacity of 10000 tons of storage tank, pipe, 20000 tons.
  
  Under the favorite person's unremitting efforts, in 1986, China's first glass fiber winding tank in chlor-alkali industry were put into use; In 1987, China's first
  
  glass fiber winding tower into use in the steel industry; In 1988, according to the
  
  German standard production engineering with complete sets of equipment in the
  
  first set of ammonium phosphate fertilizer industry in use; In 1994, China's first
  
  batch of glass sand pipe in water supply and drainage industry put into use.