39 visiting now: 17 China China flag 8 France France flag 7 USA USA flag 3 Vietnam Vietnam flag 1 Netherlands Netherlands flag 1 Sweden Sweden flag 1 UK UK flag 1 Czech Republic Czech Republic flag

Highlighted Companies

  • Suzhou Rico Machinery Co., Ltd (China): RICO, a professional CNC machinery company, who integrated research, development and... http://www.ricocnc.com
  • A Hay & Grain Co Inc (USA): involved in international trade import export. At Anderson Hay we offer a wide variety of feed... http://www.anderson-hay.com/

  • Addition Silicone Addtion Molding - China

    price: contact company for price

    HY- E625Addition Molding Silicone rubber


    HY-E625# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application.


    HY- E625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, shoe soles making, seal for electronic components and solar circuit board, trademark decoration. etc.

    Technique Data:

    Model HY-E625#

    Appearance Translucent

    Mixing Ratio 1:1

    Operating time (Mins 25°C) 30 - 50

    Curing time (Mins 25°C) 120 - 240

    Curing time (Mins 60°C) 20 - 30

    Hardness (A°) 25±2

    Density ( g/cm 3 ) 1.08

    Viscosity (CS) (Part A) 30000 ± 5000

    Viscosity (CS) (Part B) 5000 ± 500

    Viscosity (CS) (After mixed) 10000 ± 2000

    Tensile-strength( kgf /cm2 ) 50± 5

    Tear-strength (kgf /cm2 ) 15 ± 2

    Elongation-break(%) 500 ± 50

    Retractility(%) ≤0.1


    1. Clean your products and brush a layer of release agent (detergent or soap water) on the surface of your product.

    Note: The model should not have been used to make molds for tin cured silicone rubber before. Otherwise, the addition silicone will not get cured. (Use a new model to test it)

    2. Enclose the product (the original model) with four plastic plates or wooden plates.

    3. Mixing part A and part B with 1:1 mixing ratio and stir evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

    4. Pour the mixture into the model frame.

    After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .


    Twelve (12) months from date of shipment when stored at 24℃ in original unopened packages.


    Packed in clean 20kg/pail, 200kg/pail.

    For further information, please feel free to contact Mandy

    TEL: 086-755-89948019

    FAX: 086-755-89948030

    Website: www(dot)szrl(dot)net

    E-MAIL: hyjd((at)szrl.net


    Addition Silicone Addtion Molding

    Thank you in advance for your consideration

    Company Contact:

    • Phone: 08675589948019

    • Address: Building A, No.3, Hongling First Road, Liulian Shi, shenzhen, China

    • Email: Email

    Published date: September 7, 2012 -

    • Business Description: involved in international trade import export of goods, products, and services

    Related listings

    • Silicone Oil
      Silicone Oil
      Chemicals - Silica - singsun silicone group - China - September 7, 2012 - contact company for price

      Manufacturing Adhesives, Heat Transfer, Vacuum pump, Vacuum coating, Film/Special Effects, Lubricants, Chemical Processing and so on Silicone Oil Please inquiry for your need now

    • Anti Slip Silicone Coaster
      Anti Slip Silicone Coaster
      Chemicals - Silica - Shenzhen Rongen silicone rubber co.,ltd - China - September 7, 2012 - contact company for price

      Anti slip silicone coaster Item no.:RG-500 Size:14cm x 14cm These coasters will adhere themselves to the surface, but can be easily remove and will not leave any residue behind. Our anti slip coasters are made from silicone, so have excellent grip qu...

    • Fused Silcia Nozzle Brick For Coke Oven Hot Repair
      Fused Silcia Nozzle Brick For Coke Oven Hot Repair
      Chemicals - Silica - Luoyang Maile Refractroy Co.,Ltd - China - September 7, 2012 - contact company for price

      Fused silica brick is a new product which was developed by the founder of our company-an experienced expert in silica refractory, it has better thermal shock resistance, much lower thermal expansion, and perform excellently for hot repair for coke ov...

    Safe Trade Tips

    • Ask for business references and check them
    • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
    • Verify their business via their local Chamber of Commerce
    • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
    • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
    • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"