Great Silicone Resin For Led Encapsulation - Taiwanprice: contact company for price
Due to the energy saver, best brightness and higher powder LEDs was applied on very field, as general illumination backlight for LCD, and Automotive light. In encapsulation epoxy resin can not stand heat cycle on applications， A new product Silicone rubber , which had heat and weather resistant , could be apply on electric circles and LEDs used.
Uncured properties :
viscosity 8000 cps
special gravity 1.01
viscosity 3000 cps
Properties after cured :
Volume resistivity > 1.0 x 1015 ohm- cm
Dielectric strength > 20 Kv/ mm
Transmittance% 92% / 450nm
Shore 70 ( ShoreA)
Lost on heat< 0.1%
Tension strength 12. kg/ cm2
Operation process :
Weight Take RAY8636- A and RAY8636- B by 1: 1( weight ratio) .
Defoaming place the mixture in vacuum vessel， kept
vacuum lower than 100 mg Hg.
Filler Be careful pouring silicone to the container, avoid Occur bubble
Harden Preheating 100℃ X 50 min. then Curing 150℃ X 150 min.
- Posted By: Carol Young Corporation
- Phone: 886227514190
- Address: 5F-1, No. 60, Pa Teh Road, Sec. 2,, Taipei, Taiwan
Published date: August 26, 2014 -
- Business Description: Our company established in 1984. We are an experienced company with
We are the Export, Import and Manufacture. We have good experience on many fields
due to our products are diversified. Our products sell out all global areas.
Pursuit of innovation and guardian of tradition is our goal, a positive attitude & dedicated service is our spirit, let us become your best partner.
For your needs, we can provide the most appropriate products and the most perfect service in all respects.
Medical Grade Liquid Silicone Rubber For Shoe InsoleChemicals - Silica - SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD. - China - July 31, 2014 - contact company for price
Technique Data of HY- E625# Medical Grade liquid silicone rubber for shoe insoles Model HY- E625# Appearance Translucent Mixing Ratio 1: 1 Operating time ( Mins 25°C) 30- 40 Curing time ( Mins 25°C) 2- 4h Hardness ( A°) 25±2 Density ( g/ cm 3 ) 1.08 ...
Liquid Pad Printing Silicone Rubber MaterialChemicals - Silica - ShenZhen Hong Ye Jie Technology Co., Ltd. - China - July 17, 2014 - contact company for price
1. Applications of liquid pad printing silicone rubber Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer pattern...
Neoprene Gasket Cr Rotary SealChemicals - Silica - CHUYANG Rubber Co.,Ltd. - China - May 28, 2014 - contact company for price
' Material: CR Neoprene Role: Rotary seal Model: European standard Temperature: - 40- 100 ( ℃ ) Working pressure: 14 ( MPa) Scope: automotive, electrical, bearings, pumps, oil cylinder MOQ: 1000pcs Packae: Polybag and carton Sample lead time: 7...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"