Potting Of Smidahk For Power Equipment - Chinaprice: 4.00 Dollar US$
Preparing: Stir completely A and B in each container,
Mixing：A and B should be fully mixed according to the weighting ratio. Add B to A. Stirring(stir the glue dedicated blade) and mixing. Note that: should be mixedthoroughly when mixing the wall rubber of container into the plastic material.
De-airing: after mixing which should vacuum degassing for 1-3 minutes.
Potting: The mixture should be poured into the product as soon as possible, in order to avoid thickening and resulting in poor fluidity.
Curing: Heat curing or at room temperature curing. The higher the temperature, the quicker curing . The temperature is low, the curing time will be extended either. In winter, it will take a long time to cure, so suggest that heating curing. It is cured for 15 minutes at 80 ° C ~ 100 ° C, about 12 hours at room temperature.
MATTERS NEEDING ATTENTION
1. The mixture should be sealed and stored in a dry environment at room temperature, and should be used as soon as possible, to avoid wastage.
2. The product don’t belong to dangerous goods, but avoid contacting skin and eyes.
3. The product is non-toxic, has good physical inertia without stimulation and harm. The product does not contain flammable and explosive ingredients which will not cause fire or explosion without special requirement for transport.
4. Stored for a period of time, the plastic may be layered. So please stir well before using, and can’t affect its performance.
5. The following substances may hinder the curing or cause the phenomenon of not cure, so it is used after simple experiments, and need to clean the site of application if necessary.
A, incompletely cured condensation type silicone rubber.
B.amine (amine) curable epoxy resin.
C. ash welding (solder-flux).
1. 20kg/set（A10kg+B10kg), packaging with bucket.
2. 1 year shelf life if stored below 25 ℃, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
3. These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.
- Phone: +86 13728414609
- Address: Room 1206, Science Avenue 97, Guangzhou, Guangdong, China
- Website: http://www.usilicone.com
Published date: June 16, 2016 -
- Business Description: Our company has abundant experiences about R&D, especially we have advantage in clothing leather/ daily chemical/ paper making/ food and beverage/ medical treatment/ kitchen/ car accessory/ intellectual product and so on
Silica Sand SupplierChemicals - Silica - Tanvi Mines & Minerals - India - November 25, 2016 - 11.00 Dollar US$
TMM India is among the top processing and trading company of silica products. We process natural silica sand, pink silica sand, silica grannules, Silica lumps, Silica Raming mass, silica lumps (Quartz lumps). Our the period we have gained advantages ...
Thermal Gap Pad For Ev 18650 BatteryChemicals - Silica - Shenzhen Goldlink Tongda Electronics Co., Ltd - China - October 18, 2016 - 14.30 Dollar US$
Introduction Low Density & Low Hardness Thermal pad series offers a high thermal conductivity and a low thermal resistance solution that outperforms common thermal pad and solution. This series of products are resilient and good amount of deforma...
Silicone Thermal Gap FillerChemicals - Silica - Shenzhen Goldlink Tongda Electronics Co., Ltd - China - October 18, 2016 - 12.01 Dollar US$
Introduction Silicone thermal gap filler (themral putty gel)is Syringe packaging, automated production, high temperature resistance, and 100% thermal curing putty. XK-G series is a silicone based, high performance thermal Gel, filling with a variety ...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"