18 visiting now: 8 USA USA flag 5 China China flag 1 UK UK flag 1 France France flag 1 Germany Germany flag 1 Senegal Senegal flag 1 Sweden Sweden flag

Single Component Adhesive With High Property - China

price: 5.00 Dollar US$

Tensile strength ≥1.5(MPa)
Elongation At Break ≥150(%)
Shear strength ≥2.0(MPa)
Hardness 35~45(Shore A)
Temperature Range -60~200(℃)
Volume resistivity 2.2×1015 (Ω·cm)
Dielectric strength 20 (kV/mm)
Thermal conductivity ≥0.8[W/(m·k)]
Dielectric constant 3.12(1.2MHz)

Packaging: 300mL / tube, 25tubes / box.


INSTRUCTIONS
1, Clean surface: cleaning adhesion surface and to remove the rust, dust and greasy dirt, etc.
2, After sizing: Unscrew the hose cap (or cutting), squeezing the glue on cleaned surface, so that can be distributed uniformly.
3, Curing: the part of bonded or sealed were cured naturally in the air. The curing is a process from the surface to the internal, the depth of curing is 2 ~ 4mm within 24 hours (at room temperature and 55% relative humidity), if the location of sizing is too deep, especially when it is not easy to contact the air, then the completely curing time will be extended, if the temperature is low, the curing time will be extended either, the fully curing time need at least 7 days if the thickness of sealant is 6mm.


Company Contact:


  • Phone: +86 13728414609

  • Address: Room 1206, Science Avenue 97, Guangzhou, Guangdong, China

  • Email: Email


Published date: June 20, 2016 -

  • Business Description: Our company has abundant experiences about R&D, especially we have advantage in clothing leather/ daily chemical/ paper making/ food and beverage/ medical treatment/ kitchen/ car accessory/ intellectual product and so on

Related listings



  • Single Component Sealant With Good Water Proof
    Single Component Sealant With Good Water Proof
    Chemicals - Silica - Guangzhou Usilicone chemical material Co.,Ltd - China - June 20, 2016 - 6.00 Dollar US$

    Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5(MPa) Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35~45(Shore A) Temperature Range -60~200...

  • Potting Of Smidahk For Power Equipment
    Potting Of Smidahk For Power Equipment
    Chemicals - Silica - Guangzhou Usilicone chemical material Co.,Ltd - China - June 16, 2016 - 4.00 Dollar US$

    INSTRUCTIONS Preparing: Stir completely A and B in each container, Mixing:A and B should be fully mixed according to the weighting ratio. Add B to A. Stirring(stir the glue dedicated blade) and mixing. Note that: should be mixedthoroughly when mixing...

  • Good Adhesive Performance Silicone Sealant
    Good Adhesive Performance Silicone Sealant
    Chemicals - Silica - Guangzhou Usilicone chemical material Co.,Ltd - China - June 16, 2016 - 6.00 Dollar US$

    The silicone sealant has the performance of superior high and low resistance, excellent insulation, high stability with thermal oxidation and ozone. It can be widely used in aerospace, automotive electronics, office equipment, construction and so on....



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"