Disodium 4 Dodecyl 2 Oxydibenzenesulfonate Cas No 7575 62 - Chinaprice: contact company for price
4- Dodecyl- 2- ( 4- sulfophenoxy) - benzenesulfonic acid disodium salt
Benzenesulfonic acid, dodecyl ( sulfophenoxy) - , disodium salt;
dodecyl( sulfophenoxy) - benzenesulfonic aci disodium salt;
sodium lauryl diphenyl ether disulfonate;
benzene, 1, 1’- oxybis- , tetrapropylenederivs. , sulfonated, sodiumsalts;
benzene, 1, 1’- oxybis- tetrapropylenederivatives, sulfonated, ;
benzene, 1, 1’- oxybis- tetrapropylenederivatives, sulfonated, sodium;
1- Propene tetramer- oxybisbenzene, sulfonated, sodium salt;
Tetrapropyl- ( sulfophenoxy) - benzenesulfonic acid disodium salt
dodecyl diphenyl ether sodium disulfonate;
3- Dodecyl[ oxybisbenzene] - 4' , 6- disulfonic acid disodium salt;
4- Dodecyl- [ 2, 4' - oxybis( benzenesulfonic acid sodium) ] salt
C12 carbon dodecyl diphenyl ether sodium disulfonate
Appearance: （ 25℃ ） amber clear liquid
Effective content: more than 45%
Molecular weight: 569
Viscosity: CPS 145
Density: g/ ML 25℃ 1.161
The product is Double sulfonic acid salt water loving anionic surfactant, besides of the normal anionic surfactant’s feature, it has excellent soluble, surface activity, detergency, diffusivity and fights resistance ability; has good stability and solubility in strong acid, strong base, High concentrations of inorganic salt and Bleach solution. It gradually replaced the emulsifier such as K- 12, OP- 10( octylphenol polyoxyethylene ether) , TX- 10( nonylphenol ethoxylates) .
The surface tension of different concentration aqueous solution. （ dynes/ cm）
0.001% concentration 50
0.01% concentration 37
0.1% concentration 31
1.0% concentration 32
foam height mm （ <1% 25℃ ） at first : 135 after 5 minutes: 109
1. Per molecule both contain two negatively charged, that make it has better dispersing power. It has a higher solubility in the electrolyte solution. It is stability to acid, alkali and salt solutions.
2. Big molecular weight, high adsorption capacity, the preparation of emulsion aging is high efficient, low cost; latex particle size distribution is narrow and uniform.
3. Thermal stability is so excellent that it can still suitable for the emulsion polymerization reaction in the 80- 120 ° C temperature conditions without losing the surfactant
4. Good mechanical stability. the emulsion, which emulsified by this product, even under high shear conditions, also showed remarkable stability.
5. Good oxidation stability at high temperature, only the strong oxidants can change it : when the temperature is 50℃ , the strongest oxidants will play a role in a few hours later.
6. Less toxic in the concentration of 1% , contact with skin or eyes, it will only produce short- term pain and stimulate; but at higher concentrations ( > 10% ) , to try to avoid contact with eyes or skin.
1. Emulsion polymerization
Styrene- butadiene rubber latex, ABS resin, acrylic resin, PVC, vinyl chloride, butyl benzoate, all above choose this product as emulsifier, enable the latex with small particle size, distribution, storage stability, gel, etc… and can use the dosage of the product to control emulsion particle size and surfactant.
2. Textile printing and dyeing, dyes, chemicals industry
1） Can be used as a homogenizing agent in acid dyeing of the nylon, acting as dyeing material carrier to control the transfer of the acid coloring matters, and make dye uniform distribution. The result is Reducing chromatism, dye material consumptions down, economic performance improved.
2） Often used as an additive compound component.
3） Commercialization additives of dye, Greatly enhance the dye dispersion, solubility index.
3. As a cleaning agent components
Also used as cleaning agent, wetting agent, coupling agent and stabilizing agent. It have synergistic effects with other non- ionic and anionic surfactants, can used as Low temperature soap, in general detergent, it also can dissolved and stable the Phenol in detergent formulations and the fungicides which conclude chlorophenol.
4. Oil industry
The High temperature stability and resistance to electrolytes of this product make it be used for Oleic acid emulsion in the third stage of the process of tertiary oil recovery. It used as emulsifier to isolate the acid sludge.
5. Phenolic resin industry
Used as binder and Link agent in water- solubility phenolic resin.
This resin is sensitive to temperature, and short shelf life, unless there is a refrigerated or frozen. If takes from small solution and to be used, there will has a good add water dilute force in resin application. Alkaline aqueous solution or alcohol solution used in traditional manufacturing as resin solvent, but to high molecular weight resin, the more alcohol or PH value are needed in order to maintain the stability of the resin in solution. This product can overcome these difficulties. It can dissolve high molecular weight resin, used in a wide PH range, strong dilution, long life, its advantages are follows: Reduce jet ( frost) and curing. Add this product to do the accelerator; high molecular weight resin will reduce the volatilization loss. This product has no flash point and fire point, add the product can reduce the danger of fire. This product is excellent resin solvent, add 0.15% of this product can increase the water- soluble of high molecular weight resin, and increase ten- fold diluting capacity. In diluted solution, the resin containing the goods can be stored at room temperature for a month. Use this product to dissolve the resin can make full use of raw materials
, thereby reducing costs. Add this product can accelerate the cure speed of the high molecular weight resin.
6. Paint industry: used as the anionic leveling agent.
7. Pesticide industry: used as synergist, and spreading agent, wetting agent, penetrating agent and flowable in Pesticide emulsion.
8. Architectural industry: used as asphalt stabilizer which improve the road quality.
9. Production of thin films: used as antistatic agent in High polymer films
10. Electroplating industry: additive, Can control the shape and size of the grains.
11. Rubber industry: used as antistatic agent
12. Environmental protection: widely used in soil decontamination, subsurface repair and other geological aspects.
Packaging and storage: 125, 240KG/ barrel. It can be packaged according to the request. The product is stability, Non- flammable, Non- explosive; It should be sealed airtight after using to prevent debris intrusion; Can adapt to the general ambient temperature ( 5~35% ) , avoid sun exposure, quality guarantee period is more than one year. To avoid the freeze happens. If frozen, it should be heated above 10℃ , when liquefaction, using it after stirring.
- Posted By: Shangyu Simo Biological Chemical Co. Ltd
- Phone: 8657582639027
- Address: Wangchong Road, Shangyu District, Shaoxing, China
- Website: http://jx.simochem.com
Published date: April 22, 2014 -
- Business Description: Shangyu SIMO Biological Chemical Co. Ltd is the main base of
effectively turning Institute s technology into productive forces, it
covers a total area of 36000 square meters and owns workshops of
20000 square meters. Our seven product lines are industrial
surfactant series, everyday use chemicals, textile auxiliary series,
fungicide series, water treatment agent series, oil field auxiliary
additive series, unsaturated polymer resin series with annual output
of 100000 tons.
With the powerful technological background, the company has a technical team in decades production and a group of senior engineers who engaged in the production application, which lays a solid basis for the rapid development of the company.
Sodium4 8 Dibutyl Naphthalene Sulfonate Cas No 25638 17 9Chemicals - Sulfide / Sulfate - Shangyu Simo Biological Chemical Co. Ltd - China - April 22, 2014 - contact company for price
sodium4， 8- dibutyl naphthalene sulfonate CAS. NO： 25638- 17- 9 Other names： Nekal BX Nekal BN Penetrating agent BX Nature： Appearance: beige powder Water solubility: soluble in water. Feature: 17% ～ 20% liquid rela...
Sell Sodium Thiosulfate 99 Photo GradeChemicals - Sulfide / Sulfate - HENAN EASTAR CHEMICALS CO., LTD - China - April 17, 2014 - contact company for price
Appearance: monoclinic crystal Packing: 25kg/ plastic bag Quantity: 1 x FCL ( 20’GP) = 25MT without pallets Price: USD300- 350/ MT FOB Tianjin Application It is used in fixers, plating, leather, reductant, dechlorinating agent, sulfur dyeing agent, a...
Sell Sodium Thiosulphate 99 Photo GradeChemicals - Sulfide / Sulfate - HENAN EASTAR CHEMICALS CO., LTD - China - April 17, 2014 - contact company for price
♥ Description Appearance: monoclinic crystal Packing: 25kg/ plastic bag Quantity: 1 x FCL ( 20’GP) = 25MT without pallets Price: USD300- 340/ MT FOB Tianjin ♥ Application It is used in fixers, plating, leather, reductant, dechlorinating a...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"