58 visiting now: 26 France France flag 14 USA USA flag 10 China China flag 2 Sweden Sweden flag 2 UK UK flag 1 Russia Russia flag 1 Canada Canada flag 1 Netherlands Netherlands flag 1 Poland Poland flag

Wastewater Treatment Agent Poly Aluminum Chloride - China

price: contact company for price

PAC (Poly Aluminum Chloride)

PAC is a kind of new inorganic polymer

flocculate of high efficiency. It is produced

by advanced production process and it is

formed by polymerization of good raw

materials. It can be divided into solid state

and liquid state. The solid PAC can be brown,

yellow or white. There is a big difference in

application and production technology among

each PAC of those different colors. It has a

lot of advantage, such as less inpurity,

higher molecule weight and better

condensation effect.

PAC State

PAC is divided into two states: solid

state and liquid state.

Liquid PAC is the form before drying. Its

advantage is no attenuation, simple operate

and low price. But it should be transported

by tanker car, resulting in higher

transportation cost.

Solid PAC is the form after drying. Its

advantage is that it doesn’t need a tanker

car and it is easy to transport while its

disadvantage is that it needs attenuating and

this increases the labor intensity.

Product Performance

1. It has a large number of stable

polynuclear hydroxy aluminum complexes of

positive charge, which is helpful for

flocculation and sizing treatment. The water

processed by PAC is better than that

processed by Aluminum Sulfate.

2. Lower basicity consumption, lower dosage

and lower cost.

3. It is available to water with a wide PH

range (5.0-9.0).

4. It is less corrosive and it is easy to


PAC Advantage

White PAC is one of the star products in

water treatment agent series. It is a

composite efficient product that shares a lot

of advantage with common PAC, spray PAC and

paper-making PAC.

Basic differences between PAC and

traditional inorganic coagulants lie in their

different structures. The traditional

inorganic coagulants’ structure is low-

molecular-weight crystalline salt while

PAC’s is multiple Carboxyl Complex. PAC can

make flocculations fast precipitate and it

can effectively remove heavy metal ions

including SS, COD, BOD, As and Hg from water.

PAC is applicable to a wide PH range and it

is not corrosive to pipe equipment. All of

these advantage make PAC popular in drinking

water, industry water and waste water


Differences between PAC of Different Colors

In general, PAC has three colors: white,

yellow and brown.

White PAC is called high-purity white PAC

without iron or food grade white PAC. It is

of the top quality. Compared with others, its

raw material is superior aluminum hydroxide

powder and hydrochloric acid and it adopts

spray drying technology, which is the most

advance technology. White PAC is widely used

in many industries, such as paper sizing,

sugar’s decoloring & clarifying, tanning,

medicine, cosmetic, precision casting and

water processing industry.

Yellow PAC has two solid forms: flake and

powder. Its raw materials are calcium

aluminate powder, hydrochloric acid and

bauxite. Yellow PAC is mainly used to process

waste water and drinking water. When it is

used for drinking water, the materials should

be aluminum hydroxide powder, hydrochloride

acid and some calcium aluminate powder. Its

manufacture technology is plate-frame filter

pressing and spray drying method. What’s

more, yellow PAC can also be made by roller

drying or spraying tower drying. Our country

pays much attention to heavy metal percentage

in the drinking water, therefore, no matter

from raw material or production technology,

yellow PAC is better to process drinking

water than brown PAC.

Brown PAC is made from calcium aluminate,

hydrochloric acid, bauxite and iron powder.

It is made by roller drying and it is adapted

to waste water processing. The color is brown

because there are some iron powders inside.

The more iron powder is, the deeper color

will be. If iron powder is beyond the

indicator, it will be called PAFC, which

plays an important role in waste water


Quality Standard

Indicator GB/15892-2009 GB/T22627-


Drinking-water grade Water-

treatment grade

AL2O3 % ≥ 10.0 29 6.0 28.0

B % 40.0-90.0 30-95

Insoluble %≤ 0.2 0.6 0.5 1.5

PH 3.5-5.0 3.5-5.0

Fe %≤ ---- 2.0 5.0

As ppm≤ 0.0002 0.0005 0.0015

Cd ppm≤ 0.0002 --- ---

Cr6+ ppm≤ 0.0005 --- ---

Pb %≤ 0.001 0.002 0.006

Hg %≤ 0.00001 --- ---


1. Urban domestic water and industry supply

water purification

2. Urban wastewater purification

3. Industry wastewater: printing and dyeing

wastewater, leather wastewater, fluoride

sewage, heavy metal wastewater, oily

wastewater, papermaking wastewater, coal

washing wastewater, mine wastewater, brewery

wastewater, metallurgical wastewater, meat

processing wastewater.

4. Recycling of useful substances from

industry wastewater, such as braize and

starch recycling.

5. Paper sizing agent

6. Refined liquid sugar

7. Casting and molding

8. Fabric’s crease resistant

9. Catalyst carrier

10. Medicine making

11. Cement’s quick hardening

12. Cosmetics’ raw materials

Usage and Notes


1. The test should be done before application

according to the water quality to choose a

best point where the purifying result is the

best but with the lowest dosage.

2. The water should be added to produce 10-

25% PAC solution when the solid PAC is used.

Then the solution should be stirred

continually until it is attenuated to the

proper concentration.

3. The original solution and the diluent are

less corrosive than other inorganic



When using the solid PAC, users can add

some water to get the 5%-15% alumina solution

according to actual demands, which depends on

the process designs and working conditions.

Then the final solution can be put by

chemical dosing system or it can be directly

put into the water to be processed. The

specific dilution method is as follows:

First, the clean water should be poured into

the dissolving tank and then stirred.

Secondly, the PAC powder should be put into

the clean water and then be stirred until it

is totally dissolved. Workers should wear

goggles, rubber gloves, overalls to avoid

directly contacting their skin with the

product. The final solution can be used

directly or be stored.

PAC Packaging and Storage

1. Packaging: plastic woven bag outside,

plastic film inside

2. Net weight: 25kg per bag or according to

customer’s requirements.

3. Never put PAC together with toxicity

substance and other chemical agents including

same product made by different producer.

4. Storage place should be an indoor place

that is dry, ventilated and cool .

5. Be loaded and unloaded quietly.

6. Liquid product should be transported by

tank cars and pail packs. It can be used


7. Solid PAC should be dissolved before

application and the related equipment must be

made from corrosion-resistant materials.

8. Valid time: liquid PAC half year ;solid

PAC( one year)

Company Contact:

  • Phone: 008613938586985

  • Address: Nanhuan Road, Zhitian Town, Gongyi, Zhengzhou, Hen, zhengzhou, China

  • Email: Email

Published date: December 29, 2013 -

  • Business Description: Established in 1986, Henan Songshan Water Purifying Materials Co. Ltd is located in Gongyi, a place of Chinese purifier hometown in Henan province. Specialized in R&D, production and sales of water treatment agent, Songshan Company is a corporate enterprise that is engaged in R&D, application of domestic drinking water, industrial wastewater and sludge treatment technology.

    For more than 20 years, Songshan company has been adhering to a policy Science and Development. In 2002, the company passed ISO9001 International Quality Management System certification. The enterprise and its product are awarded many honors by government, such as Honest Enterprise, Quality Brand, and Famous Brand in Gongyi and so on.

    Quality First, Customer Utmostis the enterprise s principle. Based on the advanced production technology learnt from global companies, Songshan has been developing its technology and its production scale. At present, it has a decent annual production including 20,000T PAC, 20,000T PAFC, 30,000T PFS and 10,000T other water treatment agents. All of its product have achieved industrial and national standard and all indicators are of advanced level in domestic market of same product. Its products have a reliable performance so that they are applied by many Chinese companies. Besides, they are exported to many countries and regions including Latin America, Southeast Asia, Middle East and North Africa. What s more, the products are favored by the users.

    Relying on local rich resources, convenient transportation, advanced technology, excellent product quality, perfect after sales service and sound prestige, Songshan will take all its efforts to establish long term friendship with old and new clients in order to promote the enterprise s development.

    Welcome to our company.

Related listings

  • Pbtc 2 Phosphonobutane 1 4 Tricarboxylic Acid Cas 37971 36
    Pbtc 2 Phosphonobutane 1 4 Tricarboxylic Acid Cas 37971 36
    Chemicals - Water Treatment - Changzhou Truly Foreign Trade Co.,Ltd - China - April 25, 2016 - contact company for price

    Product Name: 2- Phosphonobutane- 1, 2, 4- tricarboxylic acid Synonyms: 2- PHOSOPHOBUTANE- 1, 2, 4- TRICARBOXYLIC ACID; PBTC; PBTCA; 2, 4- Butanetricarboxylicacid, 2- phosphono- 1; 2- phosphono- 1, 2, 4- butanetricarboxylic; 2- Phosphono- 1, 2, 4- bu...

  • Cas 6419 19 8 Amino Tris Methylene Phosphonic Acid Trulychem Atmp
    Cas 6419 19 8 Amino Tris Methylene Phosphonic Acid Trulychem Atmp
    Chemicals - Water Treatment - Changzhou Truly Foreign Trade Co.,Ltd - China - April 25, 2016 - contact company for price

    Product Name: Amino tris( methylene phosphonic acid) Synonyms: NITRILOTRIMETHANEPHOSPHONIC ACID; NITRILOTRI( METHYL) TRIPHOSPHONIC ACID; TRIS( PHOSPHONOMETHYL) AMINE; Dequest 2000; BRIQUEST 301- 50A; ATMP CAS: 6419- 19- 8 MF: C3H12NO9P3 MW: 299.05 EI...

  • Water Treatment Chemicals Ddbac 1227 Cas 8001 54 5
    Water Treatment Chemicals Ddbac 1227 Cas 8001 54 5
    Chemicals - Water Treatment - Changzhou Truly Foreign Trade Co.,Ltd - China - April 24, 2016 - contact company for price

    Product Name: DDBAC CAS: 8001- 54- 5 MF: C17H30ClN MW: 283.88 EINECS: 264- 151- 6 bp >100°C/ 760mmHg density: 0.98 storage temp. : 2- 8°C Stability: Stable. Incompatible with strong oxidizing agents, moisture. Hygroscopic. Hazard Codes : C, N Ri...

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"