Ethernet Over T1 To Converter - Chinaprice: contact company for price
Bridging that provides high-speed LAN-to-WAN connectivity.
Ethernet over T1 converter is an Ethernet extension device utilizing TDM telecom infrastructure (of T1, DS3, SDH or microwave links carrying T1s ). It converts the Ethernet data into T1 frame format for transmission over the existing TDM (T1) links and then re-converts the T1 back into Ethernet data the far-end terminal, to BRIDGE two Ethernet LANs over the existing T1-based telecom network. The device can effectively utilize the existing TDM network to transport Ethernet data with low investment.
The device support two protocol E1 and T1, can used as ethernet over T1 converter or ethernet over E1 converter.It is collocated with E1/HDB3 or T1/B8ZS as line interface, E1 can be either framed N*64Kbps (N=1-31) or unframed 2048Kbps, which are also known as channelization and unchannelization. Under the framed mode, it supports options of CAS/CCS (30 & 31 time slot), and CRC4 auto-adapt. T1 connects remote LAN through fully transparent unframed 1.544Mbps bandwidth. Transmission clock can be recovered from receiving signal G.703 lines and also can work in internal clock mode.
?? Based on self-copyright IC.
?? Ethernet port 10/100M half/full duplex self adaptable, supporting VLAN.
?? conforms to the requirements of G.703, G.704&G.706 of ITU.
?? E1 can be either framed N*64Kbps (N=1-31) or unframed 2048Kbps
?? conforms to IEEE 802.3/IEEE 802.3u and has VLAN 802.1Q function.
?? Support E1 line or T1 line;
?? E1 can support BNC 75-ohm and RJ45 120-ohm;
?? Support local and remote loops test, user can test circuitry and diagnose failure conveniently to achieve
port-to-port integrity test.
?? Line Rate: N*64Kbps(N=1-31); 2048Kbps
?? Line Code : HDB3
?? Interface Standard: ITU-T G.703
?? E1 Impedance: 75Ω(unbalance) and 120Ω(balance)
?? Connections : dual coax BNC and 120-ohm twisted-pair (RJ45)
?? Jitter tolerance : finer than G.742 and G.823
?? Line Rate: N*64Kbps(N=1-31)
?? Line Code : B8ZS
?? Interface Standard: ANSI T1.403-1999, ANSI T1.408，AT&T TR 62411
?? T1 Impedance: Balance 100 ohm, RJ45
?? Format of line frame : Unframed, fully transparent
?? Clock : Internal clock, slave clock(G.703 clock)
Rate: 10/100M, full/duplex auto-negotiation
Protocol: Support IEEE 802.3, IEEE 802.1Q
MAC Address Entiries: 4096 Entiries
Total Memory Sizes: 64MBits SDRAM
Physical interface: RJ45, support AUTO-MDIX
working voltage range wide, good
anti-disturb and Isolation, work stable
option I – DC-48V, range DC-36V~DC-72C
option II – AC220V, range AC165V~AC240V
Power Consumption: <=3 Watts
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)
- Phone: 862137709251
- Address: Room1301,No45, Lane 1505, Mei jia bang Road, Song , Shanghai , China
- Website: http://www.baudcom.com.cn
Published date: August 2, 2013 -
- Business Description: Shanghai Baudcom Communication Device Co.,Ltd. is the leading
manufactures and exporters from Shanghai, China. It is a high tech
company that specializes in researching, developing, manufacturing and
marketing data communication products.
Baudcom products include 10/100M Managed Media Converter,10/100/1000M Managed Media Converter, 4E1/8E1/16E1 PDH fiber optical Multiplexer, Telephone/Video/Data fiber multiplexer,Digital Vedio audio optical multiplexer, 4/8/16/32channel voice optical multiplexer,E1/V35/RS232 Fiber modems,voic10/100M+V.35/4E1/RS232/FXO(S) integrated optical transimission multiplexer, 1E1/4E1/8E1 to Ethernet protocol converter,V.35 to 10/100M converter,E1/V35/Ethernet G.SHDSL modem, TDM over IP,8/16 channels CWDM platform,SFP modules,SFF transceiver,1x9 transceiver and so on.
Gigabit Ethernet Over Stm 4 Sdh ConverterCommunications - Equipment - Shanghai Baudcom Communication Device Co,.Ltd - China - August 2, 2013 - contact company for price
The gigabit Ethernet to STM-4 converter is an Ethernet over SDH interface conversion equipment supplied with two STM-4 optical interface, two electrical Ethernet and two Optical Ethernet interface. Overview The Gigabit Ethernet/STM-4 Converter (BD-EO...
Stm 1 Terminal MultiplexerCommunications - Equipment - Shanghai Baudcom Communication Device Co,.Ltd - China - August 2, 2013 - contact company for price
BD-SDH63 is a standard SDH terminal multiplexer.It multiplexes 63 E1 signals into a STM-1 stream, with TU-12 cross-connect capability. This compact multiplexer is housed in a standard 19” 1U rack mount box. Overview As a key member of Baudcom “MetroE...
Stm1 Stm4 Sdh MultiplexerCommunications - Equipment - Shanghai Baudcom Communication Device Co,.Ltd - China - August 2, 2013 - contact company for price
BD-MUX04-LMFE is a STM-1/STM-4 SDH/MSPP platform.The 1U high 19” wide chassis of the BD-MUX04-LMFE has 8 slots, with 2 slots for the DC(1+1)/AC power supply, 1 slot for network management card, 1 slots for STM-1/STM-4 uplink, and 4 slots left for ser...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"