28 visiting now: 14 China China flag 8 USA USA flag 4 France France flag 1 Italy Italy flag 1 Netherlands Netherlands flag

Highlighted Companies

The 1400 Series Simulation Controller Set Point Temperature - China

price: contact company for price

Product introduction

1400 series temperature controller is a high reliability, high precision, low cost of the analog controller or alarm, is located in the 1/16 din in the small box. This instrument has LED status and deviation indicates, the simulation indicator set-point and ℉ / ℃ double standard characteristics of dial. Optional auxiliary alarm medium price. Input mode including J type and K type thermocouple or RTDs. Control output can be used on/off timing relay in proportion or SSR or 5 VDC logic instead of the action (heating). Alarm output (secondary or primary) are based on the configuration of the opposite action (heating) or direct action (cooling), convenient automatic or manual reset to adjust at the same time, it provides a more reliable protection system. Before, the mobile cover, easy to replace electronic components. Top cover (front panel) meet the requirements of NEMA - 2 and NEMA - 12.

Range of application

Plastic extrusion machines, injection, compound, screening or other hot forming machine; Packing sealing device; The industrial application of glue, paint, glass manufacturing, heat treatment, and environmental chamber experiment furnace; Food preparation equipment, valves, motors, HVAC, condensation, calcining kiln.

Physical properties of

Fine degrees: + / - 2% of full scale

Input impedance: thermocouple (minimum 3 mge) and RTD current (maximum 500 microamps)

Deviation indicator: the indicator LEDs from greater than 1.5% of full scale set point indicates a process deviation

Thermocouple blowout protection: more than standard scale

Sensor burst and short circuit protection: standard RTD inputs

Supply voltage: 100-100 the vav, 50-400 Hz

Operating temperature range: 14-130 ℉ (55 ℃) - 10 -

Storage temperature: - 13-149 ℉ (65 ℃) - 25 -

Unique edge: relay is insulation and SSR output, current or logic between output and input must not be Shared in common

Output rating: SSR: the maximum voltage is 240 vac, temperature is 25 ℃, the output current is 3.5 A

Relay (SPST) : under the condition of voltage 250 vac, output current impedance is 3 A, indicating current 1.5 A

Test load = 250 va: when the voltage is 125 vac, 2 a, 250 vac for 1 a

Logic (insulation) : in the maximum current is 5 mah, the voltage is 5 VDC

0-1 mah recorder: current, voltage VDC is 0-1

Weight: 8 ounces (227 grams)

218 recorder output optional: process output signals can be transported to the recorder or other data recording device. Output is non-linear, but following the curve of input device.

The attachment

Optional 8 recorder output, output signal can be stored to the recorder or other data recorder, the output is not linear

Approved by FM model - the suffix - 2102. Only about 140 j type temperature controller with alarm output.

The inventory models

The 1400 series simulation controller set point temperature

Type sensor types range ℉ (℃) lose the secondary alarm

D140BM RTD (DIN) on/off relay

D141BM euro 100 platinum on/off relay

D141AM proportion of 0.00385 euro/Europe / ℃ time relay

D140JM 0-400 (20-200) - alarm relay N/A

On/off relay not D140BC J type

D141BC thermocouple on/off relay

D141AC iron percentage/constantan time relay

D140JC 0-800 (20-420) - alarm relay N/A

On/off relay not D140BH K type

D141BH thermocouple on/off relay

D141AH nickel chromium nickel alloy/aluminum alloy relay have time ratio

D140JH 0-1600 (20-860) - alarm relay N/A

Recommended specifications

Temperature controller should be 1/16 din simulation model, equipped with LED status and deviation indicator, indicator set-point and simulate dial ℉ (℃). Operating range should be ___ ℉ / ℃ (J - T/C), (K - T/C) (DIN - RTD) thermistor sensor. Output should be (on/off relay logic/SSR / 5 VDC) (time relay percentage/SSR/logic) (alarm relay logic/SSR / 5 VDC) (4-20 mA current), precision can reach + / - 2% of full scale. Temperature controller shall be DWYER is a production, and its model for D14___.

Company Contact:

  • Phone: 13120322487

  • Address: Yang Ming Square,10 Xiao Ying Rd.,Chao Yang Distri, Beijing, China

  • Email: Email

Published date: July 16, 2013 -

  • Business Description: Beijing Jamedoorla Technology Co.,Ltd., founded in 2001, is a

    professional instrument supplier. Companies adhering to the world

    advanced technology level, it is Shared with clients continuously

    strengthen cooperation with foreign well known manufacturers, imported

    high quality instruments and recommend to the user. As the world's many

    famous instrument manufacturers in China agent (American DWYER, ARTI

    KANOMAX Japan plus field, RION) companies to provide relevant measure

    pressure, temperature and humidity, wind speed, noise, and other indoor

    environment testing instruments products. Widely used in hvac, clean

    room clean, biotechnology, electronic semiconductor chip industry, food,

    pharmaceutical, aerospace and other fields.

Related listings

  • Temperature Transmitter For Pt1000 Probes
    Temperature Transmitter For Pt1000 Probes
    Audio Electronics - Beijing Jamedoorla Technology Co.,Ltd - China - July 12, 2013 - contact company for price

    Features • Precision temperature measurement for different ranges and accuracies: -40…200°C (-40…392°F), accuracy 0.2°C, 0.4°F -40…60°C (-40…140°F), accuracy 0.1°C, 0.2°F 0…500°C (32…932°F), accuracy 0.5°C, 1.0°F • Minimum and maximum value memory • ...

  • Opr 1 Infrared Remote Control
    Opr 1 Infrared Remote Control
    Audio Electronics - Beijing Jamedoorla Technology Co.,Ltd - China - July 12, 2013 - contact company for price

    The deluxe version may be alternatively operated with an infrared remote controller for TLC. TCY. Switching ON The unit is switched on by pressing the POWER button. It will start up in comfort mode. Changing between COMFORT and STANDBY Pressing the S...

  • Lighthouse1100 Portable Laser Particle Dust Counter
    Lighthouse1100 Portable Laser Particle Dust Counter
    Audio Electronics - Beijing Jamedoorla Technology Co.,Ltd - China - July 12, 2013 - contact company for price

    Solair1100 people in the same industry leading, with 0.1 micron degree of induction and 1 cubic feet per minute (28.3 rows/min) velocity, use long life laser diode technology. Than the common HeNe laser particle counter requires less maintenance (don...

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"