Rc522 Rc523 Surface Mount Package Design Hf Rfid Reader Writer Module Jmy62 - Chinaprice: contact company for price
serial ports. And the module and antenna is linked by 50ohm coaxial
line. The impedance between RF module and antenna was tuned by impedance
analyzer; so the module has excellent read/ write performance and
stability. Though the wire can reach 10m, but the performance is good.
Normally the wire should be 60cm that is the module' s best performance
and stability. JMY620 adopts surface mount installation form. Small size
is a major feature of JMY620. JMY620 has many kinds of funtions and it
can support various contactless IC card under international standards.
Meanwhile it can support the cards from different suppliers. Designer
classified& integrated the operation commands for contactless IC cards.
In this situation, the uesr can operate it easily via sending simple
commands. The most important features for JMY620 is that it can support
contactless IC cards( T=CL) fully. It can send and receive more than 256
Bytes APDU commands and also support FSDI=8.
•PCD: NXP MF RC522, NXP MF RC523
•Working frequency: 13.56MHz
•RF standard: ISO14443A, ISO14443B
•Operating distance: 100mm( depending on card and antenna design)
•Antenna connection: by 50ohm coaxial line, ( recommend 60cm, Max. 10 meters) , due to order
•Anti collision ability: Full function anti collision; be able to process multi- cards simultaneously; be able to set operate single card only
•Auto detecting card: Supported, default OFF; Can be set
•Interface: IIC, UART( selected by SPS pin, recommend to use IIC)
•Communication rate: IIC- - 400Kbps; UART- - 19.2Kbps/ 115.2Kbps
•Max. command length: 511 Bytes
•Interface level: 3.3V ( TTL level; 5V tolerance)
•Power supply: DC 3.3V + 5V( ±0.5V)
•Power consumption: Working mode: 80mA; Idle: 100uA
•Package: Surface Mount
•Weight: about 10g
•Operating temperature: - 25 ~ +85 ℃ ( - 77 ~ +185°F)
•Storage temperature: - 40 ~ +125 ℃ ( - 104 ~ +257°F)
- Posted By: Jinmuyu Electronics Co., Ltd
- Phone: 861069559637
- Address: Room 132, Building 16, Tian Qiao Wan, XinHua North, Beijing, China
- Website: http://www.jinmuyu.com/
Published date: March 18, 2014 -
- Business Description: Jinmuyu is one of the leading 13.56MHz RFID reader manufacturers. We
build, design and customize products to satisfy a range of customers.
Our production facilities are certified under ISO/IEC10373 6, EMV2000,
EMV2010 and PBOC 2.0 which are recognized all over the world. Our
products support ISO/IEC14443A, 14443B, 15693 and ISO7816(T=0, 1)
protocols and also support MIFARE 1K, MIFARE 4K, FM11RF08 C, MIFARE
Mini, DESFire, MIFARE Plus; CPU cards(Type A/B, dual Interface, T=CL);
SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, AT88RF020; NXP I.CODE SLI,
TI Tag_it HF I, ST LRI and so on.
The products contain JMY620 series which are the surface mounted design, can send and receive more than 256 Bytes APDU commands and also support FSDI=8; lower power consumption like JMY504; JMY601 (Integration antenna design); JMY501 (connection outside antenna via four lines); JMY505 (connection outside antenna via 50ohm coaxial cable); JMY680 (applies to some metallic around systems); MR800 (with LCD display); MR600 (inlay LED Nixie tube which with 8 bits LED display); the ID reader MR761 series which can support positive sequence, reverse output in hexadecimal or decimal UID, and can read the data in the card via configuration. Many of the above products contain one or more than one SAM card slots.
At the same time, the interfaces for the reader we can offer IIC, UART, RS232C, RS485, USB (HID or PC/SC standard), Ethernet RJ45 (TCP/IP), Bluetooth and so on; and the PCD contain NXP RC500, RC531, RC632, RC400, RC522, PN512, RC523, FM1702, FM1712, FM1722; Meanwhile in order to meet the different needs of different users, we use MCU 8051, ARM7, ARM9 and ARM11 to develop the module or reader. It is worth mentioning that we also provide ODM / OEM customized products and services. Welcome to contact us, and we will provide you with the high quality products and the excellent services.
Wcdma Lte Test Sim Card For Cmu200 Cmw500 MachineElectronics - Manufacturing - GRcard (Hongkong) Co.,LTD - China - May 19, 2016 - contact company for price
LTE USIM Card Support CDMA , GSM , WCDMA , TD_ SCDMA Network all data . LTE USIM Card can write ' PIN, PUK , ADM , IMSI , ICCID , SMSC, OPC , KI ' into card . compliant to 3GPP standard , Can operate at a max temperature 75c , minimum temperature of ...
Corrugated Conduit WholesaleElectronics - Manufacturing - FlexGlory Machinery Accessories LTD - China - May 19, 2016 - contact company for price
Corrugated Conduit 1. Materials: Nylon( PA) , PE, PP, PVC. 2. Colors: Black( general) , others are workable. 3. Working Temperature: - 20degree~+120degree. 4. Our strength: Corrugated Conduit is produced by stable and reliable materials, with better ...
Smt Pick And Place Machine Steel Belt With Sprocket 1190mmElectronics - Manufacturing - Dongguan Yangling Electronics Trading Co.,Ltd. - China - May 18, 2016 - contact company for price
SMT pick and place machine steel belt with sprocket 1190MM Dongguan Yangling Electronic Trading Co. , Ltd. enjoys a high reputation among customers. We are mainly engaged in the production of various SMT equipment, SMT consumables and SMT lubricating...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"