Yag Pulsed Xenon Lamp Pumped Power Supply 600w 800watt Nd Flash Source 18kw - China

YAG Pulsed Xenon Lamp Pumped power supply, 600W/ 800watt Nd

YAG xenon flash lamp power source, 18kw YAG laser cutting

power supply

1. Summary:

YAG lamp pump pulse laser power supply for cutting( constant

voltage type) is controlled by DSP. User can cut different

thickness of metal sheets through setting laser power

( adjust voltage) , working frequency, pulse width. There are

kinds of optional power supply of different output power

according to the different usage. The single- lamp Powernot

less than10kW, double- lamp Powernot less than20kW( Laser

Power: 800w) is the standard configuration.

2. Features：

1. Xenon lamp power control is constant voltage control,

current rising without delay, single pulse output laser

energy large.

2. Adjustable range of laser frequency, better high frequency

laser output mode, longer life of xenon lamp, cutting speed

faster and the kerf smaller.

3. Mixed control of DSP and analog circuit, make power

control easier and more stable.

4. Multiple protection function of internal power supply,

improves the product reliability greatly.

5. Product operating fault detection and alarming. Simple

faults can be debugged quickly by the users themselves.

6. Power output parameter can be programmed and communicate

with host computer. It can be also set and operated easily.

7. Laser out by manual operating is convenient to test.

8. Power supply is small in size and it is a modular

construction, easier for installation and transportation.

3. Specifications:

Input Voltage: Three- phase four –wire AC 380V±10% , 47- 63HZ

Pumping Lamp Model& Quantity: Pulsed Xenon/ 2PCS

Rated Power: not more than20Kw( Optical Power: 800W) Single lamp

Power not less than10Kw

Output Voltage Range : 400VDC- 650VDC

Trigger Voltage Range: 20KV- 25KV; After the success of light

, Xenon lamp maintaining voltage : 170VDC- 250VDC

Output Peak Current Range: 0- 225A

Working Mode: Pulse

Pulse Width: 0.1- 1.5Ms

Laser Frequency: 0.1- 300Hz( According to the characteristics

of the lamp,

the maximum : 500 Hz)

PF: ≧ 0.9( with adjusting inductance) , not less

than0.7( without adjusting inductance)

Working Environment: In the environmental temperature below

35 degree Celsius, dry conditions, air dust <0.01 g/ m3, no

condensation.

Display Control Mode: LCD screen display and control

Precombustion time: real- time

Continuous Working Time: not less than24hr

Cooling Type: forced air cooling

Net Weight of Power Boxes: unit 1= 34kg unit2= 33kg

Enclosure Rack Net Weight( exclude power boxes) ( OPTIONS) : 59kg

Size of Power Supply

L* W* H=650mm* 500mm* 185mm ( Charging Box)

L* W* H=545mm* 500mm* 185mm( Discharging Box)

Size of Enclosure Rack( OPTIONS)

L* W* H=730mm* 630mm* 980mm

4. Application：

Applicable to YAG lamp pumped laser cutting equipment,

processing materials of stainless steel ( including pipe) ,

stainless iron ( including pipe) , galvanized steel sheet,

aluminum alloy ( including pipe) , aluminum, copper, rare

metal materials, etc, Cutting thickness from 0.1mm to 8mm.

Application industries: mechanical and electrical equipment,

sheet metal processing, chassis cabinets, stainless steel

products, kitchen, lamps, ornaments, auto accessories,

glasses, hardware tools, billboard, decoration.