66 visiting now: 22 France France flag 21 China China flag 14 USA USA flag 3 UK UK flag 2 Sweden Sweden flag 1 Germany Germany flag 1 Philippines Philippines flag 1 Brazil Brazil flag 1 Canada Canada flag

Plastic Injection Molds - China

price: contact company for price

The plates on most of the plastic injection molds have been ground now,

and virtually all 21 of my dies have been split open and checked. Only

things left to do is to coat the interlocks and replace the crap Chinese

tips with DME' s or Mastip tips.

So far the operator side ( wether being the twin cavity molds or a smaller single cavity mould) fills last / least. I' ve lost a lot of hair over this, if only I could afford, then I would have no doubt it would be the plastic injection molding machine.

If the exterior walls cool too fast the shrinkage will draw from the center to the perimeter walls. This will cause a void. A small increase in mold steel temp may help. The location of the bubble is at end of fill. This may indicate a venting or a flow entrapment problem. As mentioned PP is not hydroscopic, but surface moisture can still be a problem. This is more evident when the material is stored in silos. Just preheating just not remove moisture. You need a dryer if this is the problem.

Company Contact:

  • Phone: 8675526075566

  • Address: No. 16 xixiang baoan, Shenzhen, China

  • Email: Email

Published date: August 16, 2014 -

  • Business Description: Sometime we are facing the problem is small part but bigger tonnage, I

    am not sure how the product look like, maybe the plastic part is

    necessary need the high clamping force by projection are, normally we

    try to avoid that and adjust on the plastic injection mold design. What can I suggestion is, you can try to use high speed plastic injection molding machine with special small Nozzle Dia. screw and try to run as fast as possible, and normally special product need to custom make or design the manifold, unless the plastic injection mold is using standard manifold, shot weight not consider when injection mold make.

    If everyone would take a second and read the initial question again. Bruno would like to know what the record is for a 1000 ton change time and if it could be done in 10 min or less. There is a big difference between injection mold change and last part to first good part. It is nice to see all the sales folks jumping on the blog and trying to get a sale. I would think it a no brainer that the larger the plastic injection molding machine and the faster the change time to more costly the system and the longer time to pay for the investment in the automation.

Related listings

  • Sell Tank Bottom Valve
    Sell Tank Bottom Valve
    Engineering - Henan Quanshun Flow Control Science & Technology - China - May 11, 2016 - contact company for price

    For all liquids and slurry DN 20 to DN 400 3/ 4' to 16' PN 10 to 250 acc. to size 150 to 1500 Lbs acc. to DN Functions - Tank bottom valve tank or reactor bottom outlet valve tank bottom control valve Operating principle - Tank bottom valve - Shutter...

  • What Is The Main Features Of Presswood Pallet Machine
    What Is The Main Features Of Presswood Pallet Machine
    Engineering - Shanghai Pallet Machinery - China - May 3, 2016 - contact company for price

    With economic globalization and knowledge economy era, the status in the national economy has become increasingly prominent. So, more and more handling instrucments are needed in the logistic system. Presswood pallets emerge at this moment. Meanwhile...

  • Large Size Metal Seated Butterfly Valve
    Large Size Metal Seated Butterfly Valve
    Engineering - Henan Quanshun Flow Control Science & Technology - China - May 3, 2016 - contact company for price

    Features 1. Designed with bidirectional sealing structure, the installation of the bidirectional rotary ball valve will not be restricted by the direction of the fluid. 2. Since the metal sealed bidirectional rotary ball valve is offered with self- s...

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"