25 visiting now: 9 China China flag 8 USA USA flag 7 France France flag 1 Sweden Sweden flag

Tapered Chisel Bits Wholesale - China

price: contact company for price

(1) Type: chisel bits

(2) Size: 19mm, 22mm, 25mm

(3) Diameter: 26-100mm.

(4) Taper degree: 4°46′, 6°, 7°, 11°, 12°

(5) Dimension of Tungsten Carbide 15*10mm(Normal),18*10(Strengthen)

(6) Skirt Normal,Lengthen

(7) Package: in wooden case or in carton.

(8) Productivity: 50000pcs/ month

Advantages of taper chisel bits: cheap in price and the Assorted taper drill rods and rock drills, easy to carry and adequate for various construction conditions. Matched with taper drill rods, the taper chisel bits are widely used in drilling holes with depth less than 5 meters and diameter ranged in 32-46 mm by light-duty rock drill.

Each of rock drill bit is produced in different sizes and designs in order to optimize their application to a broader scope of rock drilling conditions and correspond to different job requirements.

There are different taper degrees for taper drill bits which are used for different rock formations and rock drills.

Taper degree of 11°and 12° are common on modern rigs. A narrow taper degree of 7° is used for low impact rock drills and softer rock formations. This degree can also be used if you have spinning problems when using 11° or 12° equipment.

To ensure the normal service life, the taper drill bits need to be matched well with taper drill rods, the taper degree must be the same between taper drill bits and taper dill rods ; the penetration depth of taper drill rods which into the taper hole of taper dill bits should be over 25mm ,and the head of the taper drill rods should not touch the bottom of the taper of taper drill bits, otherwise the taper drill bits would be lost easily during operation.

The operation for rock drill is also important: before starting drilling, turn down the air flow level of rock drill to reduce the damage to the taper bits which is resulted from the local high stress suffered by the tungsten carbide. The taper bits should fully penetrated into rocks before turnning up the air flow back to the normal level,

When the width of the edge’s flat top is more than 3 mm, It is necessary to change or grind the taper chisel bits in order to avoid low drilling speed and short service life of taper drill bits. Once there is abrasion for the taper on chisel drill bits, change or grind the chisel drill bits timely, otherwise the taper drill bits would be seriously worn, drilling speed would be lowered and the taper drill bits would even jammed.

Once encountering a steel bar or other foreign materials during rock drilling, the drilling position should be adjusted to avoid breakage of the head of rock bits.

When the rock drilling is prone to jamming, the rock bits should be replaced to taper cross drill bits or taper button bits.


Company Contact:


  • Phone: 8659187513252

  • Address: 7F, China Foreign Trade Center Building, No.75, Wu, fuzhou, China

  • Email: Email


Published date: October 10, 2013 -

  • Business Description: involved in international trade import export of goods, products, and services

Related listings



  • Reaming Bits Wholesale
    Reaming Bits Wholesale
    Equipment - Drill Bits - Qideli Rock Drill Tools Co., Ltd - China - October 10, 2013 - contact company for price

    A reaming bit functions to enlarge a borehole and it is designed with a drill portion and a reamer portion. The drill portion is formed by cutting edges at the end of a plurality of flutes, and the reamer portion includes a first relief formed on eac...

  • Tapered Button Bits Wholesale
    Tapered Button Bits Wholesale
    Equipment - Drill Bits - Qideli Rock Drill Tools Co., Ltd - China - October 10, 2013 - contact company for price

    (1) Type: button bits (2) Size: 19mm, 22mm, 25mm (3) Diameter: 30mm-42mm. (4) Taper degree: 4°46′, 6°, 7°, 11°, 12°. (5) Buttons 4, 5, 6, 7, 8 (6) Flushing Hole 1, 2 (7) Skirt Normal, Length (8) Package: in wooden case or in carton. (9) Product...

  • Sell Gantry Type Cnc Drilling Machine For Steel Plate
    Sell Gantry Type Cnc Drilling Machine For Steel Plate
    Equipment - Drill Bits - Jinan Sunrise CNC Machine CO.,Ltd - China - September 23, 2013 - contact company for price

    Gantry Type CNC Drilling Machine for Steel Plate Applicable Industry: CNC gantry plate drill is a special CNC machine for drilling connection boards and base plates of steel structure, tower, bridge and other industries. Product feature: 1. CNC slide...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"