New Dental Led Integrated E Generator Low Speed Handpiece With Internal Water Spray Gentle Fewer - Chinaprice: contact company for price
interruptions, as essential visual inspections using external light
sources are not required. This allows for treatment that is not only
especially gentle but also time-efficient. Effective lighting of the
treatment area is therefore a fundamental prerequisite for a high
quality and time-efficient treatment.
In light of this, handpieces and contra-angles with light are the most common aids for lighting the working area. In the past, motor-operated fibre optics on handpieces and contra-angles were sometimes available on the market.
This new generator technology independently produces the energy necessary for the LED light source. The higher the speed of the motor, the brighter the light produced.
LED contra-angle handpieces are compatible with any motor with ISO connection. These instruments are not dependent on the motor used and therefore no further investment is required. Furthermore. LED lights have a lifespan over 10 times longer than that of halogen bulbs.
The instruments produce daylight quality LED light with a colour temperature of 5, 500 kelvin. The human eye is accustomed to daylight and can best perceive contrasts at this colour temperature (Fig. 1). Thus this colour temperature supports stress-free work. In addition to the light quality, the brightness and size of the illumination area also allow for comfortable work (Fig. 1). The light intensity increases with the speed of the motor; even at a low speed a good light intensity is achieved and detailed illumination is ensured. This precise illumination ensures that even at a low motor speed treatments can be carried out without complications. The only disadvantage of light production that is dependent on a generator is that light cannot be produced when the motor is not running. As a result, checking the prepared area is only possible using an external light source.
Please find other tech information below:
-. LED E-generator intergrated low speed dental handpiece 1:1 Ratio
-. Self-sufficient power ITSstem instead of external light source. Self-illuminated, natural light
-. Internal Water Spray: EaITS operation
-. Air consumption: 300 ~ 350Kpa(3.0 ~ 3.5kgf/cm2)
-. Speed of generator: 22, 000-27, 000 R.P.M
-. Ceramic Bearings - Quieter and longer life
-. Ultra Push Chuck - Simple bur exchange
-. Single water spray
-. Sterilization by autoclave at (135) Centigrade
-. Unenclosed Cartridge
-. Noise level: below 0 dB
-. LED Luminous intensity: 4, 500 ~ 4, 800 mcd
-. LED Color temperature: 3, 500K ~ 4, 000K
-. Bur Applicable: Dia 2.334 ~ 2.355mm; Dia 1.59 ~ 1.60mm
Please contact us through ITSDental website directly; we will get back to you within 24 hours.
New Dental Led Integrated E Generator Low Speed Handpiece With Internal Water Spray
Please inquiry for your need now
- Posted By: ITS Dental
- Phone: 862084662533
- Address: 463,Qiaoxing Rd Panyu District, Guangzhou, guangzhou, China
- Website: http://www.itsdental.com
Published date: September 7, 2012 -
- Business Description: ITS Dental is a privately held company with over 30 years of dental equipment experience. We have satisfied agents, resellers and dentists in over 50 countries and areas worldwide for our OEM dental products. We are recognized for our unparalleled commitment to excellence and integrity while offering exceptional product, service and value.
132kv Composite Polymer Hollow InsulatorEquipment - Electrical - Components - WISH POWER - China - September 7, 2012 - contact company for price
Components: Silicon rubber housing, Fiberglass tube, Galvanized steel fittings. Features: Light weight, Good anti-pollution performance, High strength, Anti-aging and Long life. 132kv Composite Polymer Hollow Insulator Feel free to contact us with al...
Quartz Monitor Crystals For Vacuum Evaporation Deposition ProcessEquipment - Electrical - Components - Jiaxing JingKong Electronic Co;Ltd - China - September 7, 2012 - contact company for price
Specification: Frequency:6Mhz, Electrode material :Gold/Chrome; Crystal cutting:AT-Cut. Optical coating components-Quartz Monitor Crystal, which is excellent for vacuum evaporation application. The quartz monitor crystals work with high sensitive qua...
Piezo D33 Test MeterEquipment - Electrical - Components - Shanghai Project Electronic Tech. Co., Ltd. - China - September 7, 2012 - contact company for price
The Model YE2730 d33 meter is a special instrument directly to measure piezoelectric constant d33 values of piezoelectric ceramics, polymers, and single crystals. This meter can also measure d33 value in various single crystal materials, such as lith...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"