43 visiting now: 17 USA USA flag 8 France France flag 8 China China flag 5 Sweden Sweden flag 2 UK UK flag 1 Vietnam Vietnam flag 1 Germany Germany flag 1 Italy Italy flag

1200c 1400c 1700c Pid Auto Control Programmable Tube Furnace - China

price: contact company for price

1. YL- 1200T Tube Furnace

YL- 1200T Tube furnace with Fe- Cr- Al alloy heating element.

The furnace is installed with 60mm, 80mm and 100mm, 150mm

O. D quartz tube with a pair of smart stainless steel vacuum

sealing flange and valve / gauge which allow to heat sample

under vacuum or flowing gas condition upto 1200°C.

Precision temperature controller can provide 30 segments

heating and cooling steps with ±1°C accuracy.

Specifications

Structure 1) Split cover for easy tube

replacement

2) Thermal efficient ceramic ( high purity alumina

fiber) insulation surrounding the chamber provides maximum

energy efficiency.

3) Resistance wire coil on three sides of interior

chamber for fast and uniform heating.

4) Heavy duty double layer structure with cooling fan

to keep furnace exteriors safe to touch.

Tube sizes Inner diameter: 20—150mm

Heating zone length: 50—1000mm

Working temperature 100℃ - - 1100℃ ( continuous)

1200℃ ( less than 3 hours)

Power 0.5—10KW

Voltage 110 - 440V Single or three Phase 50/ 60 Hz

Thermal couples K type

Stability at 1000 °C +/ - 0.5 °C

Uniformity at 1000 °C +/ - 2.0 °C

Max. Heating Rate 50°C/ min

Temperature Control 1) PID automatic control and

auto- tune function.

2) 30 programmable segments for precise control.

3) Built- in over temperature alarm and protection

allows for operation without attendant.

4) +/ - 1 ºC temperature accuracy.

5) K type thermocouple installed for immediate use.

Application Notes 1) For preserving the longevity

of the furnace components, we recommend the heating rate not

to exceed 10 °C / min.

2) Cooling rate shall also not exceed 10 °C / min.

3) This furnace lacks vacuum sealing, toxic or

explosive gases are not recommended for use with this

furnace without necessary safety controls and supervision.

4) Small cracks may appear on the surface of the

refractory ceramics over extended use. This is a normal

occurrence and the cracks may be repaired with alumina

coating.

Warranty One year limited warranty

We also can produce any specification furnaces according to

your detailed requirements

2. YL- 1400T Tube Furnace

YL- 1400T tube furnace using SiC rods as heating elements. It

is widely used for materials or chemical lab to sinter all

types of new materials samples under vacuum or other gases

condition. The temperature of EQ- GSL- 1500X40 tubing furnace

is controlled by high precision SCR ( Silicon Controlled

Rectifier) digital controller with accuracy ±1oC and 50

segments programmable up to 1400oC. The tube furnace can be

placed into a glove box to process material in various

atmospheres.

Structure 1) Thermal efficient ceramic ( high

purity alumina fiber) insulation surrounding the chamber

provides maximum energy efficiency.

2) Resistance wire coil on three sides of interior

3) Heavy duty double layer structure with cooling fan

4) 1500°C grade SiC heating elements with replacement

at easy

Tube sizes Inner diameter: 20—100mm

Thermal couples S type

5) S type thermocouple installed for immediate use.

3. YL- 1600T Tube Furnace

YL- 1600T tube furnace is a bench- top furnace applying 1700

grade MoSi2 heating rods. It is widely used for material &

chemical researching lab to sinter all types of new material

samples under vacuum and other gas conditions. 30 segments

programmable high precision temperature controller are

embedded with accuracy ±1°C and max. controlling

temperature up to 1650ºC.

4) 1700°C grade MoSi2 heating elements with

replacement at easy

Thermal couples B type

4. YL- MTF Multi- zone Tube Furnace

YL- MTF Multi- zone Tube Furnace furnaces are split- able

multi- zone tube furnace from 40mm ( 1.6" ) to 127mm ( 5" ) O. D

tube size which can achieve faster heating up to 1200°C or

1600℃ and create a different thermal gradient by adjust

multi- zone temperature. The furnace includes one fused

quartz tube, one pair of vacuum sealing flanges with

pressure gauge & ball valve for immediate use. Multi 30

segments temperature controllers are installed with K type

thermal couple. Microprocessor- based self- tuning PID control

provides excellent control without overshooting and ±1°C

accuracy. It is widely used in annealing, diffusing and

sintering sample in various atmospheres.

Structure 1) The zones can be 1, 2, 3, 4, 5 zones

2) Split cover for easy tube replacement

3) Thermal efficient ceramic ( high purity alumina

4) Resistance wire coil on three sides of interior

5) Heavy duty double layer structure with cooling fan

Temperature Control 6) PID automatic control and

7) 30 programmable segments for precise control.

8) Built- in over temperature alarm and protection

9) +/ - 1 ºC temperature accuracy.

10) K type thermocouple installed for immediate use.

Application Notes 5) For preserving the longevity

6) Cooling rate shall also not exceed 10 °C / min.

7) This furnace lacks vacuum sealing, toxic or

8) Small cracks may appear on the surface of the

5. YL- RTF Rotary Tube Furnace

YL- RTF Rotary Tube Furnace which is designed for calcining

inorganic compound with better uniformity, especially good

for preparing Li- Ion battery cathode materials with

conductive coating, such as LiFePO3, LiMnNiO3, etc in R& D

Laboratory.

Furnace Construction 1) Double shell casing with

three cooling fans

2) High purity Alumina fibrous insulation for max.

energy saving

3) Gear DC motor drives quartz tube with variable speed

0 - 12 RPM

4) The furnace can be tilted up to 40° by electric

lift

5) Split cover enable faster cooling and easy operation

Heating Zone length

Tube inner diameter 1) 100mm—1000mm

2) 20mm—150mm

Zones number 1zone, 2zones, 3zones

Working Temperature 100- - 1500. C ( continuous )

Maximum Temperature 1200℃ , 1400℃ , 1600. C ( < 3 hrs)

Temperature Control Multi digital controllers each has

30 steps programmable and PID automatic control

Rotating Time & Speed Controller 1) Continuous

Mode: The tube will be continuously rotated if the rotating

mode switch is set on “Continuous Operation”

2) Intermittent Mode: “Intermittent Operation” allows

you use the time controller to program the desired rotating

and dwell time

3) Tube Rotating Speed: 0~7 RPM variable

Temperature Accuracy + 1. C

Heating Element 1200℃ with resistance wire,

1400℃ with SiC heating rods,

1600℃ with MoSi2 heating rods

Working Voltage AC 110V—440V Single Phase or Three Phases

60/ 50 Hz ( or according to your requirement)

Max. Power 2- 10 KW


Company Contact:


  • Phone: 8618237160098

  • Address: 57 Huichang Village, Xingyang, China

  • Email: Email


Published date: September 8, 2015 -

  • Business Description: specilize in producing muffle furnace, tube furnace, crucible furnace,vacuum furnace, bogie hearth furnace

    dental furnace, vacuum furnace, bogie hearth furnace, mesh belt furnace,

    MoSi2 heating elements etc.

    Xingyang Yuli Machinery Equipment Co., Ltd., founded in 2001, is a collection development, design, production, sales and service in one of the professional production of modern enterprises, specializing in the production of automatic heat treatment line, quenching furnace, tempering furnace, bogie hearth furnace, laboratory muffle furnace, tube furnace, MoSi2 heating elements and SiC heating elements and other furnace related products, the Department of the Xingyang Furnace Chamber of Commerce executive director .

    Company is located in Xingyang City, next to the train station, hase convenient traffic, has more than 1200 square production base, from Germany to introduce a full automatic CNC shearing machine, bending machine, automatic edge banding machine heavy and CNC computer numerical control multifunction machining center and other international advanced manufacturing and testing equipment of electric furnace. And from Italy to introduce the thicker steel processing and 2 electrostatic spraying production lines , so that our products can better meet the demands of market and customers.

    The company in the procurement of raw materials to the finished product storage, the implementation of the whole process of identification test and control, advanced processing technology and strict quality management, so that the "Yu mechanical equipment" product quality can be guaranteed.

    Company's products with excellent staff and leadership team, a modern management model, first class production equipment and technology, skilled and unique sales network, so that the "Yu mechanical equipment" products sold in Zhejiang, Beijing, Shanghai, Jiangsu, Shandong, Chongqing, Anhui, Jiangxi and so on more than 20 provinces and cities, are exported to Europe, America, Middle East, Asia and other countries and regions.

    "Yuli" in good faith with your hands, first class equipment, first class technology, first class service, reasonable price for your dedication to provide quality models, the modernization of electric furnace. Designed for you to create an elegant, stylish, comfortable office environment, set up the good enterprise image, pave the road to success.

Related listings



  • Cardan Shaft
    Cardan Shaft
    Equipment / Machinery - YANGZHOU LASTE MECHANICAL ENGINEERING CO., LTD. - China - May 21, 2016 - contact company for price

    shaft coupling performs by connecting two shafts or the shaft with the rotary part, so as to keep them linked together during the transmitting movement and dynamic process. And it can also function as a compensation of the relative displacement betwe...

  • Kneader Reactor
    Kneader Reactor
    Equipment / Machinery - Foshan JCT Machinery Co., Ltd - China - May 18, 2016 - contact company for price

    The introduction of kneader reactor Kneader reactor is the main chemical reaction of the typical production equipment, which is widely used in resins, adhesives, paint, cosmetics, pharmaceutical and other chemical production. To break down or combine...

  • Toyooki Gear Pump
    Toyooki Gear Pump
    Equipment / Machinery - A&S Hydraulic Co., Ltd - China - May 17, 2016 - contact company for price

    A& S Hydraulic Co. , Ltd supplies all models of Toyooki Internal Gear Pumps: Toyooki Internal Gear Pump TCP Series Toyooki Internal Gear Pump TCM2, TCM3, TCM4, TCM5 Toyooki Internal Gear Pump TCP2T, TCP3T, TCP4T, TCP5T Toyooki Internal Gear Pump TCP2...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"