Big Stirling Engine Runs On Any Heat Source - Canada

SPECIFICATIONS:

Hot air compression & Stirling Cycle Engine Design

No electricity required to operate

1 Kg.

Gas can run up to 300 Hours

Consumes 2 BTU Flame (2 Candlelight)

Light weight & portable (gas tank, not included)

Can use Natural Gas, CNG, LPG, Propane, Oil

Built-in Natural Gas Jet (Replace jet for LPG)

Built-in Holder for carriage

Turns on with a finger push

No grease or engine oil required

Very minimal use of fire flame

Fly wheel Size = 7" (Seven Inch)

Fly wheel Surface Speed 500m/min (Average)

Torque Speed = 1, 000 RPM (Average)

Engine Size = 58cc (Measurements not Power)

Discharges hot air

Best for the student experiments, off-grid or remote area

Testing

Low Noise

Weight: Approx.

8Kg.

(without gas tank)

Dimensions: Height 27" x Width 14" x Length 14"

1-Year Warranty

Company Contact:

• Posted By: Hyporex Technologies Inc.

• Phone: 6048001240

• Address: 12118-101b Ave., Surrey , BC , Canada

• Email:

• Website: https://www.hyporex.ca

• Business Description: A typical U.S. household consumes about 11, 000 kWh per year, costing an
  
  average of $1, 034 annually.
  
  In Canada, the average household uses a
  
  total of about 1, 000 kwh of electricity per month or 12, 000 kwh per
  
  year.
  
  In 2007, Canadian households spent on average $1, 147 on
  
  electricity and $610 on natural gas.
  
  Average Canadian household consumed
  
  40 gigajoules of electricity and 92 gigajoules of natural gas.
  
  Hyporex was founded to explore alternative, renewable and sustainable, green energy technologies to serve off grid markets through on site power generation and heating, as a substitute to grid power and natural gas.
  
  After years of research and development, some unique and patent able, technological inventions of commercial grade value and industrial designs have been completed and their prototypes are being prepared for the public demonstrations in Canada.
  
  In power generation, we have stirling power generator, solar power systems and heat to power generator.
  
  Natural gas alternatives are included but not limited to resources such as bio fuels, bio gas and hydrogen.
  
  Hyporex may issue licensing of their proprietary technologies to the industry leading manufacturers, as well as trial to full scale production as per market demands is underway.
  
  Hyporex converts simple conceptual drawings to 3D product design, transformation of the industrial designs to a realistic and practical configuration, selection and collection of the parts, prototype development to a full scale commercial grade finished product.
  
  Product demonstration conceives licensing to the manufacturers for the mass production in exchange of licensing fees and royalties of which partial proceeds are re invested into our in house R&D facilities.
  
  Thus, a finished product finally goes out to the global manufacturing facilities and then through sales & marketing channels for the distribution to the end consumers.