Silica Dryer Sand With High Quality - China

Application of Bailing silica dryer

Bailing silica dryer is widely used in a variety of

materials drying operations.

As reliable operation,

convenient operation, strong adaptability, large capacity,

it is widely used in metallurgy, building materials, food,

light industry, chemical industry, coal, medicine and mining

industries.

silica dryer is suitable for drying granular

materials in general.

It can also be mixed with some

materials by drying sticky paste materials or materials with

higher water content.

Commonly used in dry sand, slag, coal,

animal waste and so on.

Working principles of Bailing silica dryer

Wet materials are transfered from the belt conveyor or

bucket elevator to the hopper, and then by feeder feeding

through the feeding device into the terminal.

Drum silica

dryer cylinder into a slightly tilted to the horizontal

rotating cylinder.

Adding material from the higher end, low-

end entry by the heat carrier, and the material into a

counter- current contact, but also heat carrier and the

material together and flow into the cylinder.

With the

rotating cylinder, the material runs by gravity to a more

bottom end.

Wet material in the cylinder body to move

forward the process, directly or indirectly heating the heat

carrier, the wet material to dry, and then the discharge end

by the belt conveyor or screw conveyor sent.

Tumble dryer

wall of the cylinder body with lifting plate, its role is to

copy the material up and planted, so that the surface of the

material increases the contact with the air flow to improve

drying rate and to promote material progress.

Heat- carrier

is generally divided into hot air, flue gas.

After heat-

carrier around cylinder dryer back then, generally require

cyclone trap the gas inside the material brought down.

For

further reduction of dust content in exhaust gas should be

handled through the bag filter before discharge.

Structure composition of Bailing silica dryer

It mainly consists of revolution body, raise material board,

transmission device, supportive device and sealing ring,

etc.

The heat sources of the drier is from the combustion train,

and is adopts down- flow heating methods.

When the materials

enter into the body from the feeding device, it will be

pushed back by the spire raising board.

As the drier is in

an inclined position, the materials will be down to the

lower end under the influence of gravity and rotation, but

the raising board will be threw to the upper end for

scattering.

This procession makes the material well-

distributed in the body, and then ensure the heat exchange

with the heat wind.

After repeated cycle with this

procession, the moisture content will be dried.

Characteristic of Bailing silica dryer

1 - The machine' s design is reasonable, have reliable

performance, high efficiency, dry and heat uniform,

maintenance is convenient.



2 - Equipment adopts self- aligning type tug structure, the

tug and with good tire- roller, greatly reduces the wear and

tear of power consumption.



3 - Resistance to overload ability, cylinder smooth operation

and high reliability.



4 - Drying machine has the characteristics of high

temperature resistant, high temperature hot air can be used

for a rapid drying of material.



5 - silica dryer processing capacity, fuel consumption, dry

low cost less.

Company Contact:

• Posted By: Henan Bailing Machinery Co., Ltd.

• Phone: 008637167996061

• Address: 3rd, 79th Kexue Road, hi-tech zone of Zheng, Zhengzhou , China

• Email:

• Website: https://www.bailingmachinery.com

• Business Description: Henan Bailing Machinery Co., Ltd. is a modern enterprise specialized in
  
  manufacturing mining equipment which is integrated with research,
  
  production, and marketing of the mining equipments.
  
  The headquarter is
  
  located at the HI TECH industrial development zone in Zhengzhou,
  
  covering above 28 thousand square meters.
  
  For the time being, Bailing
  
  Machinery has passed the authoritative certificates such as ISO9001: 2008
  
  and CCC authentication(China Compulsory Product Certification).
  
  We are
  
  aslo honored as "contract abiding and trustworthy" enterprise of Henan
  
  province.
  
  And the enterprise has followed the scientific management
  
  method of modern enterprises, producing equipments with meticulous care
  
  and endless innovation, in this way, it has rapidly delevoped and become
  
  an outstanding enterprise in the mechanical industry in China.
  
  Henan Bailing Machinery Co., Ltd. is committed to designing, producing grinding mills, crushers, conveyors, feeding machines, drying and calcinating as well as beneficiation equipments and etc, which are widely applied in electricity, metallurgy, mine and quarry, wharf, granary, chemical industry.
  
  Our products have been spreaded all over China, and also exported to European, American, Asian, African countries and enjoyed great popularity among our customers.
  
  Our company owns an experienced and skilled sales and service team which compose a perfect service network.
  
  We will send the professional engineers to the installation sites and provide guidance for the installation, commissioning and initial run as well as planning administration of the equipments after purchase.
  
  All the staff are improving the study ability of whole team with full passion, fresh vitality, and diligency.
  
  We are striving to be the strong, professional, and best enterprise with "high quality, best service, good faith" and aim at being the first class mining equipment enterprise in domestic with advanced international standard.
  
  We warmly invite customers all over the world to visit our factory, guide our work, and cooperate with us.