Steaming Chambers Drying - Turkeyprice: contact company for price
HIGH EFFICIENT TIMBER DRYING KILNS AND CONVENTIONAL STREAMING CHAMBERS
The drying chamber consists of a statical framework in aluminium construction, withstanding any actual loads such as wind, deadweight, and snow 120 kg/m2. The casing is made of prefabricated aluminium panels with rockwool isolation 100 mm thick.
1. SIZE AND CAPACITY
internal size of dryer approx. 8, 60 m deep
6, 50 m wide 5, 20 m high
size of the space for woodstacks 6, 60 m deep
6.00 m wide
4.00 m high
capacity approx. 75 m3 square-edged timber (thickness 50 mm) the kiln is to be loaded by front loading lift-track.
2.1. AIR CIRCULATION
4 high efficient axial fans in a very rigid aluminium construction with suction ring in aluminium and suitable for reversing operation and complete with cone.
4 closed three-phase current motors in special construction with heat resistant tropical insulation, suitable for max. 85°C ambient temperature with 100% rel. air humidity. Electrical supply 380V 50 cycles power 4 kW, total consumption 16 kW /
1 fanwall for 4 fans and motors
3 special heating elements in stainless steel construction, with aluminium fins, for heating by steam 3 bar or hot water 90 °C.
1 manual shut off valves 1 strainer
1 instrument for spraying with hot water 3 bar 1 manual shut off valve
with pipes for supply of spraying medium up to the perimeter of the dryer
1 false ceiling construction över the wood pile ali in aluminium construction
2.4. AIR DAMPERS
6 dampers with acting mechanism, in aluminium construction for supply and exhaust air.
1 lifting-sliding door in all aluminium construction dimensions 660 X 410 cm
Heat isolation rockwool 100 mm, special hinges in stainless steel, complete with counter frame and special rubber gasket
2 built in walk-door 150X75 cm 1 door lifter and its rails
1 set of install material as packings, screvvs, gaskets ete.
2.6. SWITCH CABINET
1 prewired electric switch cabinet for motor control, with automatic reversing equipment consisting of:
1 main switch
4 reversing contactor relay combinations with the necessary fuses and overload relays for switching the fans
1 main control fuse
1 set of signal lamps
1 set of heat resistant motor cables Performance and built-in electrical parts according to TSE
2.7 COMPUTER CONTROL SYSTEM AKOMAT 6 (ONE UNIT)
Fully automatic measuring and control system consisting of:
1 set of signal lamps and identification labels
1 measuring unit for timber moisture with 6 measuring points, measuring range
4 - 60 %
2 electronical temperature sensors temperature measuring and control range 0-90°C
2 EMC sensors
6 measuring points for timber moisture, each consisting of angle for connection, 6 m special cable, 2 drive-in electrodes 15 mm, 2 drive-in electrodes 30 mm made of stainless steel
1 set of cables from connection angle to the control device 1 automatic pneumatic heating valves 1 automatic solenoid spraying valve
1 electromagnetic air valves
2 damper actuators
3.1 TIMBER DRYING KILN
(disassemble, assemble and changing hot water system the existing kiln)
Please Ask For Price
Our prices are quoted for delivery F.O.T. ex work Düzce-Turkey, including packing and supervising of assembly on site.
Prices with reservation to change, if there are changed costs of manufacturing.
Payable against irrevocable L/C; 50% at the time of ordering, 50% at delivery against B/L
Time of delivery: 12-14 weeks after clearing up all technical and commercial questions.
All sales, use, excise or other state or local taxes to which this transaction is or may be subject are to be paid by the Purchaser.
For the install of one dryers at the customer’s factory in Lithuanian, Orent will provide 2 technicians for a period of 10 days. Their labour cost is included in the price. The travel, accomodation and meal expenses are to be paid by the Buyer.
Additional working and travelling days of one technician, caused by the Buyer, will be charged as 50 Eur/day.
During the assembly period the customer will provide a team of workers per following qualifications:
3-4 simple workers
Corrections in view of technical development are in our reservation.
- Posted By: GoodsTurk
- Phone: 08503023651
- Address: Kavaklı Sokak, Düzce,Merkez, Düzce, Turkey
- Website: http://www.goodsturk.com
Published date: July 25, 2016 - Modified date: July 25, 2016
- Business Description: We are Consultancy company in Duzce. We also selling goods of our customers.
Exporting, E-Commerce ,Quality Systems, Consultancy, Business Solution Partner, International trade,selling goods from Turkey.
We are certificating companies for ISO.
Quartz Stone AtcMachinery - Woodworking - Jinan Pinmai Machinery Co.,Ltd - China - August 27, 2016 - 25000.00 Dollar US$
Technical parameters Model No Quartz processing center X, Y, Z working area 3100*1500*500 mm Lathe Bed Thick steel weld Table Steel board+Aluminum board XYZ Guide Rail 30mm Taiwan Square Rail X Y Transmission Imported Rack Gears Z Transmission Import...
Three Axis Wood Cnc RouterMachinery - Woodworking - Hefei Aquila CNC Equipment Co., Ltd - China - August 12, 2016 - 4515.00 Dollar US$
Single Head Wood CNC Router Applicable Scope： Classical mahogany furniture, white wood European furniture, carved antique furniture, wall hollow, solid wood doors, craft doors, Paint-free doors, cabinet doors, craft windows, variety of tables, sofas,...
Atc Toolholder Forks Iso30 Grippers Hsk63f Router Gradle Bt40 Gripper Bt30 ClipMachinery - Woodworking - SUZHOU RICO MACHINERY CO., LTD - China - July 30, 2016 - contact company for price
Rico CNC supplies high-quality CNC toolings and accessories; ISO30, BT, HSK tool holders; ATC gripperfingers for many automatic tool exchangers. Rico is able to help you order the correct ATC plastic holding fingers for your ATC tool magazines. ISO30...
Safe Trade Tips
- Ask for business references and check them
- Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
- Verify their business via their local Chamber of Commerce
- Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
- Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
- This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"