Hydraulic Turbine Francis Type Water - Chinaprice: contact company for price
are the most common water turbine in use today. The Francis turbine has
the characteristics of simple structure, small size, low cost, high
efficiency at full capacity ( typically over 90% ) , stable in running,
applicable to a wide range of water heads.
The Francis turbine is a type of reaction turbine, a category of turbine in which the working fluid comes to the turbine under immense pressure and the energy is extracted by the turbine blades from the working fluid. A Francis turbine consists of the following main parts: Spiral Casing, Guide or Stay Vanes, Runner Blades, Draft tube, etc.
Francis turbines are almost always mounted with the shaft vertical to keep water away from the attached generator and to facilitate installation and maintenance access to it and the turbine.
Application scope of heads: 10m ~ 650m
Runner diameters: 1.0 m ~ 10.0m
Installable capacity: 200KW ~ 200000KW
Specific ratio speed: 50 ~ 300
Francis turbine suitable for the middle & high water head, medium level of water flow, and large variation in the load of power stations.
* Compact in structure.
* Reasonable in design.
* Convenience in maintenance.
* Reliable in operation.
* Excellent in efficiency.
The layout of the unit has vertical type or horizontal type, Which are widely used in hydropower stations and hydropower plants.
- Posted By: Addnew Hydropower Limited
- Phone: 008673188570063
- Address: RM 503, Bldg. 8, Rong Ke San Wan Ying Chi, 448 Sha, Changsha, China
- Website: http://www.addnew.com.hk
Published date: April 24, 2014 -
- Business Description: ADDNEW is a 36 year manufacturer, supplier and EPC contractor of a
complete range of Hydro Turbines, Generators, Electromechanical,
Auxiliary Equipment and Engineering Service for any new or existing
Hydropower Plant and new generation Automation Systems for Power Station
and Power Grid.
36 Inch Cs Auger DrillPower Tools - Hydraulic - Germany S.U.G Group(China) Co.,Ltd - China - October 22, 2013 - contact company for price
For hole digging in favorable to moderate soil conditions with one man hand held auger drive. Feature: 1. Teeth Alloy steel teeth available in: Standard—standard drilling Hardfaced—abrasive soil/impact Carbide—rock/abrasive soil 2. Pilot Bit: Hardene...
42 Inch Cs Earth AugerPower Tools - Hydraulic - Germany S.U.G Group(China) Co.,Ltd - China - October 22, 2013 - contact company for price
Feature: 1. Teeth Alloy steel teeth available in: Standard—standard drilling Hardface—abrasive soil/impact Carbide—rock/abrasive soil 2. Pilot Bit: Hardened, Cast Alloy two –flute pilot bit 3. Length: 42” 4. Flight: single flight 5. Hubs: 7/8” Square...
Valve Body Casting For HydraulicPower Tools - Hydraulic - Ningbo Yinzhou Hengxi Changli Machinery Parts Fact - China - October 15, 2013 - contact company for price
This valve body is for Hydraulic Valve, and the process is precision casting and machining.If you're interested in our products, please contact us without any hesitation. We sale standard parts, but not only, usually, we will receive a drawing from t...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce