Hydraulic Turbine Tubular Type Water - Chinaprice: contact company for price
of tidal power and hydraulic power with extremely low heads and
extremely large flow rates. They have the advantages such as large
discharge, high flow speed, high efficiency and less excavation, etc.
Their variations have Bulb, Pit, Siphon and S types according to their structural types.
The water diversion parts, runner and water drainage parts of Tubular turbine are on one axial line. The water flow directly and straightly through the runner without spiral casing. The water flow is axial from the pipe inlet to the draft tube outlet.
Tubular turbine generally has two categories: Fully tubular and half tubular. The half Tubular turbine is divided into bulb, pit and shaft extension types, etc.
The generator' s rotor of the full tubular type unit is on the outer circle of turbine' s runner, whose application is less because of its difficult sealing.
For half Tubular turbine, the generator is separate from the hydro turbine:
Tubular type: Generator set is installed inside the airtight bulb body, which has a compact structure, straight passage shape, high hydraulic efficiency and so it is widely used.
Shaft extension type tubular unit: The generator is installed outside, the main shaft of turbine extends to the outside of the draft tube.
Pit type tubular unit: The generator is installed inside a pit.
Application scope of heads: 2m~25m
Runner diameters: 1.0m ~ 7.2m
Installable capacity: 200KW ~ 200000KW
Tubular type turbine suitable for low water head and large flow of hydropower station or tidal power in the plains, hills and coastal.
hydro generators, water turbines, hydroelectric plants.
- Posted By: Addnew Hydropower Limited
- Phone: 008673188570063
- Address: RM 503, Bldg. 8, Rong Ke San Wan Ying Chi, 448 Sha, Changsha, China
- Website: http://www.addnew.com.hk
Published date: April 24, 2014 -
- Business Description: ADDNEW is a 36 year manufacturer, supplier and EPC contractor of a
complete range of Hydro Turbines, Generators, Electromechanical,
Auxiliary Equipment and Engineering Service for any new or existing
Hydropower Plant and new generation Automation Systems for Power Station
and Power Grid.
Hydraulic Turbine Francis Type WaterPower Tools - Hydraulic - Addnew Hydropower Limited - China - April 24, 2014 - contact company for price
Francis turbines can be designed for a wide range of heads and flows and are the most common water turbine in use today. The Francis turbine has the characteristics of simple structure, small size, low cost, high efficiency at full capacity ( typical...
Hydraulic Turbine Kaplan Type WaterPower Tools - Hydraulic - Addnew Hydropower Limited - China - April 24, 2014 - contact company for price
The Kaplan turbine is an inward flow reaction turbine, which means that the working fluid changes pressure as it moves through the turbine and gives up its energy. Power is recovered from both the hydrostatic head and from the kinetic energy of the f...
36 Inch Cs Auger DrillPower Tools - Hydraulic - Germany S.U.G Group(China) Co.,Ltd - China - October 22, 2013 - contact company for price
For hole digging in favorable to moderate soil conditions with one man hand held auger drive. Feature: 1. Teeth Alloy steel teeth available in: Standard—standard drilling Hardfaced—abrasive soil/impact Carbide—rock/abrasive soil 2. Pilot Bit: Hardene...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce