41 visiting now: 15 China China flag 9 France France flag 9 USA USA flag 4 Sweden Sweden flag 3 UK UK flag 1 Netherlands Netherlands flag

Dynisco Pressure Transmitter - China

price: contact company for price

Dynisco pressure transmitter Injection Molding PT4654XL ( 1% 4- 20 mA)

Features and Benefits

• Adjustable zero and span

• Accuracy better than ±1.0%

• Inconel diaphragm

• 4 - 20 mA output

• 0 - 3, 000 to 0 - 20, 000 psi

• Internal 80% shunt calibration

Description

The PT4654XL Series transmitter is a ±0.5% sensor ideal for injection molding machine nozzles or hot runners to measure polymer melt pressure. The PT4654XL transmitter provides the industry standard 4 - 20 mA amplified signal to data acquisition or SPC/ SQC programs. The PT4654XL comes equipped with adjustable zero and span pots. The PT4654XL features a 1/ 2- 20 UNF jam nut for simple and easy installation in space restricted areas. The transmitter can be supplied in a variety of lengths to meet the requirements of the application.

Dynisco pressure transmitter Injection Molding PT4655XL ( 1% 0- 5 Volt)

• 1' flex bend radius

• Inconel 718 diaphragm

• Free spinning jam nut

• Better than ±0.5% accuracy

• Up to 750°F ( 400°C) melt temperatures

• 0 to 5 Vdc, 1 to 6 Vdc, 0 to 10 Vdc or 1 to 11 Vdc outputs

Models PT4655XL and PT4656XL measure polymer melt pressure in an injection molding machine nozzle or a hot runner. A protective flexible armored cable extends from its electronic housing to the tip for unmatched strength and increased life. Each model has a built - in amplifier to provide 0 to 5 Vdc ( PT4655XL) , 1 to 6 Vdc ( PT4655BXL) , 0 to 10 Vdc ( PT4656XL) or 1 to 11 Vdc ( PT4656BXL) output to data acquisition or SPC/ SQC programs. The amplified signal offers better resistance to noise than standard mV/ V strain gage outputs.

Dynisco pressure transmitter Injection Molding PT4656XL ( 1% 0- 10 Volt)

the PT465XL measures polymer melt pressure in an injection molding machine nozzle or a hot runner. A protective flexible armored cable extends from its electronic housing to the tip for unmatched strength and increased life. Located in the nozzle, the PT465XL provides a very accurate measurement of the pressure of the plastic melt entering the mold.

Dynisco pressure transmitter Injection Molding PT4674 ( 0.5% 4- 20 mA)

• Accuracy better than ±0.5%

• DyMax® coated stainless steel wetted parts

• 0 - 500 to 0 - 30, 000 psi

The PT4674 Series transmitter is a ±0.5% sensor ideal for melt pressure measurements where space is limited. The PT4674 transmitter provides the industry standard 4 - 20 mA amplified signal designed to work with DCS and PLCs. The PT4674 comes equipped with adjustable zero and span pots. The PT4674 features a 1/ 2- 20 UNF jam nut for simple and easy installation in space restricted areas. The transmitter can be supplied in a variety of lengths to meet the requirements of the application.

• 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs

• Exposed, bendable capillary

Models PT4675 and PT4676 offer a 0.06' exposed diameter capillary to allow a 1/ 16' radius bend for mounting in tight spaces. Each model has a built - in amplifier to provide 0 to 5 Vdc ( PT4675) , 1 to 6 Vdc ( PT4675B) , 0 to 10 Vdc ( PT4676) or 1 to 11 Vdc ( PT4676B) output to a DCS or computer system.

• 3.33 mV/ V FSO

• All stainless steel wetted parts

• Good stability and repeatability

Model PT467E is similar to the PT462E yet features a 0.06' diameter exposed capillary. This allows 1/ 16' radius bends in applications where mounting space is limited. It also has a free - spinning jam nut that simplifies installation.

42. Dynisco pressure transmitter Melt Pressure Gauges

Dynisco pressure transmitter Melt Pressure Gauges Melt Monitor ( Melt Pressure Transducer with Integrated Display and Alarms)

• Dual 5- digit display

• Peak display function and digital auto- zero

• Programmable alarm relays

• Optional 4 - 20 mA, 0 - 10 Vdc retransmission

• Customer definable engineering units

The Dynisco Melt Monitor Alarm Series is a melt pressure transducer with an integral digital display. An optional temperature measurement is available. The Melt Monitor has been designed for the rigorous environments of the plastics extruder. Standard features, including the digital auto- zero and peak display function provides easy operation with an accurate pressure measurement. With the optional built in temperature sensor, the display is capable of providing both process pressure and temperature simultaneously. The Melt Monitor comes standard with two programmable alarm relays. The alarms can be programmed for either manual or automatic reset and early warning indication. In addition, these models are be provided with two digital inputs for remote reset and remote zero, as well as 4 - 20 mA, 0 - 10 Vdc and 1 - 5 Vdc user selectable, retransmission of the pressure signal

Dynisco pressure transmitter Melt Pressure Gauges PG4 Series ( Mechanical Melt Pressure Gauges)

• Direct, local readings

• Mechanical design

• Step- up and stem- down versions

• Gauge head rotates 300o

• 0 - 5, 000 or 0 - 10, 000 psi

• Stainless steel construction

Dynisco’s family of mechanical pressure gauges are the ideal choice for applications requiring simple maintenance free pressure indication. Polymer pressure is sensed by a metal diaphragm, mounted flush with the inside surface of the extruder barrel with pressure indicated on the readout gauge. The sealed diaphragm design eliminates the need for grease and prevents melt contamination and gauge plugging. On the rigid snout version the mechanical gauge can be rotated 300° for unobstructed viewing. For applications involving high temperatures or restricted spaces gauges with flexible stems are available so to mount the gauge farther away from the process. Thermocouple or RTD configurations are available to provide melt temperature.

43. Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs 830 Series General Purpose Sensors

• Accuracy ±0.5%

• 3 mV/ V, 5 Vdc and 10 Vdc outputs

• 0 - 100 to 0 - 30, 000 psi

• Excellent temperature compensation

• Internal shunt calibration

• Bonded strain gage sensor

Models 830, 831, 850, 851, 860 and 861 general purpose transducers offer flexible design and a pressure measurement accuracy of ±0.50% full scale output. Interchangeable configuration allows users to specify the pressure range, pressure port and output level that meet specific application requirements. A bonded strain gage sensor provides reliable operation in a wide range of industrial applications.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs 831 Series General Purpose Pressure Transducers

• Accuracy ±0.25%

Models 830, 831, 850, 851, 860 and 861 general purpose transducers offer flexible design and a pressure measurement accuracy of ±0.25% full scale output. Interchangeable configuration allows users to specify the pressure range, pressure port and output level that meet specific application requirements. A bonded strain gage sensor provides reliable operation in a wide range of industrial applications.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs Echo Melt Pressure Sensors

• 2 year warranty and 60 years of Dynisco industry experience

• TiAlN diaphragm coating is standard

• mV/ V, 0- 10VDC, or mA outputs available

• Integral temperature sensor option

• Available in configurations that fit most extruder applications

• 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs LDA415 Melt Pressure Transducers

• 3.33 mV/ V full scale output

• Accuracy of better than ±0.5%

• Pressure ranges from 0 - 35 BAR to 0 - 700 BAR

• Temperature up to 538°C

• All welded stainless steel with washdown capability

• Available with hermetic connector or conduit fitting

• CE approved

Dynisco' s LDA415 Series of washdown pressure transducers are the ideal choice for food and medical extrusion measurements requiring washdown capability and a mercury free sensor. Model LDA415 uses a special high temperature fill ( NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 538°C. The transducers are supplied with a high accuracy ( 0.5% ) , great repeatability and reliability. An 1/ 2- 14 NPT conduit fitting or 6- pin hermetically sealed bendix- style connector is used for easy connect and disconnect.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs MDA410 Melt Pressure Transducers

• Accuracy of better than ±0.25%

• Handles temperatures up to 1000°F

• Superior thermal compensation

• CE Approved

Dynisco' s MDA410 Series of pressure transducers are the ideal choice for non- mercury, food and medical extrusion applications requiring a fill material that meets FDA and USDA requirements. Model MDA410 uses a special high temperature fill ( NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 1000°F. The transducers are supplied with a high accuracy ( 0.25% ) , great repeatability and reliability. An 6- pin bendix- style connector is used for easy connect and disconnect. The MDA410 is the most commonly used alternate fill melt pressure transducer in the world.

44. Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs MDA420 Melt Pressure Sensors

• Accuracy better than ±0.25%

• Proven sensor design

• Excellent thermal stability and repeatability

The MDA420 Series transducer is a ±0.25% sensor ideal for melt pressure applications requiring high accuracy, simple installation, repeatability and reliability. The MDA420 transducers provide the industry standard 3.33 mV/ V signal designed to work with most pressure indicators. The MDA420 comes equipped with an eight pin Bend connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The MDA420 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs MDA435 Melt Pressure Transducers

• Pressure ranges from 0 - 35 BAR to 0 - 2, 000 BAR

• Fits in tight locations

Model MDA435 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The MDA435 features a 0.06' diameter exposed capillary. This allows 1/ 16' radius bends. It also has a free- spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect. The MDA432 designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs MDA460 Melt Pressure Sensors

The MDA460 Series transducer is a ±0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mV/ V signal designed to work with most pressure indicators. The MDA460 comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The MDA460 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs MDA462- M10 Melt Pressure Transducers

• 6 mm sensing diaphragm

• Pressure ranges from 0 - 350 BAR to 0 - 700 BAR

• Accuracy of better than ±1%

• Reduces mounting hole dead space

• Flexible stem offers greater thermal isolation and mounting ease

Dynisco' s MDA462- M10 melt pressure transducer utilizes a small 6mm sensing diaphragm for space restricted areas making it the ideal choice for small extruders and rheometers. The MDA462 provides simple installation, high accuracy ( 1% ) , repeatability and reliability. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs MDA467 Melt Pressure Transducers

• Pressure ranges from 0 - 100 Bar to 0 - 2, 000 Bar

Model MDA467 Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The MDA467 features a 0.06' diameter exposed capillary. This allows 1/ 16' radius bends. It also has a free- spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect. The MDA467 designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

45. Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs MRT 460/ 462/ 463 Multiple Range Melt Pressure Sensors

• Accuracy of better than ±1.0%

• Four user selectable pressure ranges in one model

• Externally selectable range via rotary switch process conditions

• 3.33 mV/ V FSO for selected range

Now, users can select from among four pressure ranges on one transducer with the new Dynisco MRT, the first multi - range pressure transducer. By simply turning a rotary switch via an access pot on the transducer, four potential pressure ranges can be selected. The transducer can be ordered so that the equivalent psi, bar, Kg/ cm2 or MPa ranges can be chosen. This revolutionary melt pressure transducer offers maximum versatility to handle changing process conditions and materials.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT130 Hydraulic Sensors

• 3 mV/ V output

• Handles temperatures up to 285°F ( 140°C)

• All welded, stainless steel construction

• Rugged design

• Compact

Dynisco' s PT130 Series is designed to measure hydraulic pressure on injection molding machines. The PT130 series withstands cyclic pressure and provides outstanding performance under the severe demands of measuring the injection ram and clamp pressure of injection molding machines. Variations in the hydraulic pressure profile indicate irregularities during the injection and feeding stages of the molding operation and provide information about the stability of the injection ram system.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT311JA Flush Mounted General Pressure Sensors

• Flush diaphragm

• Zero volume pressure port

• 15 to 10, 000 psi

Dynisco' s PT311JA flush diaphragm pressure transducer is designed for applications requiring a zero volume pressure port. The flush diaphragm improves frequency response and has excellent cleanability. The PT311JA has a full scale output of 3mV/ V and offers reliable and accurate pressure measurement of gases, viscous liquids and slurries

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT410/ 412 Alternate Fill Melt Pressure Sensors ( NaK)

• Measures up to 1000°F ( 538°C)

• NaK fill meets FDA and USDA requirements

• 0 - 500 to 0 - 10, 000 psi

The PT410 Series transducer is a ±0.25% sensor ideal for food or medical applications requiring high accuracy, simple installation, repeatability and reliability. The NaK fill material meets the requirements set forth by both the FDA and USDA for contact with food and medical products. The PT410 Series transducers provide the industry standard 3.33 mV/ V signal designed to work with most pressure indicators. The PT410 comes equipped with an eight pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT410 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections, if desired.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT415 Alternate Fill Sensors/ Wash Down ( NaK)

• Sealed stainless steel housing and stem

• Standard conduit, optional hermetic fitting

• Internal 80% shunt

• FDA recognized as safe ( GRAS)

Model PT415 features a stainless steel electronics housing and stem, allowing it to be used in such applications as food and photographic processing where it may be washed down regularly. The standard conduit fitting may be replaced by a hermetic 6 - pin connector ( Option B314) .

46. Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT415D Melt Pressure Transducers

• Pressure ranges from 0 - 500 psi to 0 - 10, 000 psi

• FDA recognized safe ( GRAS) for food and medical applications

Dynisco' s PT415D Series of washdown pressure transducers are the ideal choice for food and medical extrusion measurements requiring a fill material that meets FDA and USDA requirements. Model PT415D uses a special high temperature fill ( NaK, Potassium Sodium) and an Inconel diaphragm to allow accurate pressure measurements in processes with temperatures as high as 1000°F. The trasnducers are supplied with a high accuracy ( 0.5% ) , great repeatability and reliability. An 1/ 2- 14 NPT conduit fitting or 6- pin hermetically sealed bendix- style connector is used for easy connect and disconnect.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT420 Melt Pressure Sensors

The PT420 Series transducer is a ±0.25% sensor ideal for melt pressure applications requiring high accuracy, simple installation, repeatability and reliability. The PT420 transducers provide the industry standard 3.33 mV/ V signal designed to work with most pressure indicators. The MPT420 comes equipped with an eight pin Bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT420 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT435A Melt Pressure Transducers

• Pressure ranges from 0 - 500 psi to 0 - 30, 000 psi

• DyMax® coated 15- 5 stainless steel wetted parts

• Designed for space restricted areas

Model PT435A Series of pressure transducers are the ideal choice for high accuracy polymer melt pressure measurements with space restriction issues. The PT435A features a 0.06' diameter exposed capillary. This allows 1/ 16' radius bends. It also has a free- spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 8- pin bendix- style connector is used for easy connect and disconnect. The PT435A designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT450FA/ PT450TA Flange Mounted Melt Pressure Sensors

• Choice of flanged or threaded configurations

• 0 - 250 to 0 - 10, 000 psi

• Withstands processes up to 700°F

• Replacement for traditional “button - seal” units

Dynisco’s PT450 Series offers melt pressure measurement in ranges from 0 - 250 through 0 - 10, 000 psi at accuracies down to 0.25% and process temperatures up to 700°F. For easy installation, the flexible stem transducer is offered in flanged ( model PT450FA) and threaded ( model PT450TA) versions. Both models are ideal for processing low viscosity materials and applications such as fiber spinning and polymer transport lines.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT460 Melt Pressure Sensors

The PT460E Series transducer is a ±0.5% sensor ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mV/ V signal designed to work with most pressure indicators. The PT460E comes equipped with a six pin bendix connector. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460E features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of other electrical connections if desired.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT460XL

• Superior temperature stability

• Patented sensing element

• 0 - 3, 000 to 0 - 30, 000 psi

The PT460XL Series transducer is a ±1.0% sensor ideal for abrasive and/ or corrosive melt pressure applications requiring simple installation, repeatability and reliability. The PT460XL transducers provide the industry standard 3.33 mV/ V signal designed to work with most pressure indicators. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460XL features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT462E- M10 Melt Pressure Transducers

• Pressure ranges from 0 - 5, 000 psi to 0 - 10, 000 psi

Dynisco' ' s PT462E- M10 melt pressure transducer utilizes a small 6mm sensing diaphragm for space restricted areas making it the ideal choice for small extruders and rheometers. The PT462E- M10 provides simple installation, high accuracy ( 1% ) , repeatability and reliability. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect.

47. Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT465XL Melt Pressure Transducers

• Compliment to in- mold transducers

• Pressure ranges from 0 - 3, 000 psi to 0 - 10, 000 psi

• Rugged Inconel 718 diaphragm

• 1 inch flex band radius

• Free spinning jam nut for ease of installation

• Minimum mounting space required

Model PT465XL Series of pressure transducers measure polymer melt pressure in an injection molding machine nozzle or a hot runner. A protective flexible armored cable extends from its electronic housing to the tip for unmatched strength and increased life. Located in the nozzle, the PT465XL provides a very accurate ( 0.5% ) measurement of the pressure of the plastic melt entering the mold. It also has a free- spinning jam nut that simplifies installation. Standard transducers are supplied with an Inconel diaphragm for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect. The PT465XL is designed for the restricted locations is ideal for nozzle and hot runner pressure measurements in Injection Molding.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT467E Melt Pressure Transducers

Model PT467E Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The PT467E features a 0.06' diameter exposed capillary. This allows 1/ 16' radius bends. It also has a free- spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect. The PT467E designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT467E- M10 Melt Pressure Transducers

• 6 mm sensing element

• Fits in space limited areas

Model PT467E- M10 Series of pressure transducers features a small, 6 mm sensing element ideal for general purpose polymer melt pressure measurements with space restriction issues or on small lab extruders and rheometers. The PT467E- M10 features a 0.06' diameter exposed capillary. This allows 1/ 16' radius bends. It also has a free- spinning jam nut that simplifies installation. Standard transducers are supplied with a DyMax® coated diaphragm for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect. The PT467E is designed for the restricted locations is ideal for nozzle pressure measurements in Injection Molding, small lab extruders and rheometers

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs PT467XL Melt Pressure Transducers

• Pressure ranges from 0 - 3, 000 psi to 0 - 30, 000 psi

• Abrasion resistant Inconel diaphragm

Model PT467XL Series of pressure transducers are the ideal choice for general purpose polymer melt pressure measurements with space restriction issues. The PT467XL features a 0.06' diameter exposed capillary. This allows 1/ 16' radius bends. It also has a free- spinning jam nut that simplifies installation. Standard transducers are supplied with Inconel diaphragms for increased wear resistance and longevity. A 6- pin bendix- style connector is used for easy connect and disconnect. The PT467XL designed for the restricted locations is ideal for nozzle and hot runner pressure measurements in Injection Molding.

Dynisco pressure transmitter Melt Pressure Sensors with mV/ V Outputs Vertex Mercury Free Sensors

• No fill material or moving internal parts

• RoHS compliant for sustainability programs

• Robust Inconel diaphragm is coated with DyMax®

• Diaphragm is much thicker with unique sidewall support

• Available with J- type thermocouple temperature output

• 0- 1, 500 to 0- 10, 000 psi pressure range capability

• The first and only 4- YEAR WARRANTY

Vertexâ„¢ is a Dynisco melt pressure sensor innovation that matches or exceeds the performance of the traditional sensor. The big differences are that Vertex is more robust, much faster, and significantly friendlier to the environment.

The breakthrough technology lies at the tip of the sensor, where melt pressure is registered directly through a single, more robust diaphragm. Direct measurement eliminates errors that can arise in sensors with complicated internal structures, transmission fluids and moving push rods. The Vertex diaphragm is much thicker than those in other sensors and is made of tough Inconel 718 alloy, which provides a higher level of corrosion resistance than stainless steel. For added protection, the tip is coated with a diamond- hardened DyMax® coating. The sensor walls have been fortified to handle side stresses. With all these features, Vertex is the true definition of a robust sensor, proven to deliver long life and a low cost of ownership.

Vertex design innovation also extends to the speed of response of the sensor. Faster processes and controls demand faster sensing measurements. Vertex is many times faster than traditional sensors improving real time production. Environmental regulations and community conscientiousness are driving sustainability policies and programs in large and small companies. Waste stream reduction and longer life cycles are good for the environment and the budget. Dynisco can assist because Vertex is green, very green. There is no mercury, no NaK, no oil, no Gallium, no fill material what- so- ever. Vertex is also RoHS compliant.

Vertex sensors are available with 3.33mV/ V or 4- 20mA output signals and designed to work with universal pressure indicators. An optional J- type thermocouple is available to provide a melt temperature signal. Vertex is equipped with a 1/ 2- 20 UNF for installation in standard transducer mounting holes

48. Dynisco pressure transmitter Melt Pressure Sensors with Voltage Outputs

Dynisco pressure transmitter Melt Pressure Sensors with Voltage Outputs Echo Melt Pressure Sensors

The Echo™ Series of melt pressure sensors offer quality performance and value for plastic processing utilizing standard configurations and pressure ranges. Echo sensors are designed to meet customer requirements by providing a combination of economic value and performance for general extrusion applications while providing a ±0.2% repeatability when measuring process pressures. Use Echo Series sensors when the application requires a quality measurement for optimized control, but not the costs of all the extra features.

Dynisco has produced field- proven pressure sensors for more than 60 years. Echo was designed with the best engineering practices and is backed by Dynisco with a two full years of warranty – double the protection of comparably- priced sensors.

Echo sensor diaphragms are coated with Titanium Aluminum Nitride, as a standard offering, providing superior performance over less effective Titanium Nitride coatings.

Dynisco technology is widely accepted by OEM’s and end users throughout the world. The Echo Series sensors are available with 3.33mV/ V, 4- 20mA, 0- 5VDC or 0- 10VDC outputs designed to work with most industrial controls. In addition to melt pressure measurement, Echo Series offer a optional melt temperature measurement with type J, K thermocouples or RTD. The Echo Series are equipped with a 1/ 2- 20 UNF or M18 thread for installation in standard transducer mounting holes. Additional mounting configurations are available.

Dynisco pressure transmitter Melt Pressure Sensors with Voltage Outputs PT160 General Purpose Sensors

• Contoured diaphragm

• Potted hybrid electronics and flex- print wiring

• 3 mV/ V, 5 Vdc, 10 Vdc or 4 to 20 mA outputs

• Fully temperature compensated

• Ranges from 0 - 500 psi to 0 - 10, 000 psi

The Dynisco PT100 series measures hydraulic pressure on injection molding machines. The PT100 series withstands cyclic pressure and provides outstanding performance under the severe demands of measuring the injection ram and clamp pressure of injection molding machines. Variations in the hydraulic pressure profile indicate irregularities during the injection and feeding stages of the molding operation and provide information about the stability of the injection ram system.

Dynisco pressure transmitter Melt Pressure Sensors with Voltage Outputs PT46X5/ MDT460 Melt Pressure Sensors

• 0 - 5 Vdc and 1 - 6 Vdc outputs

• Internal 80% shunt calibrations

The PT46X5 Series transmitter is a ±0.5% sensor ideal for general purpose melt pressure measurements requiring simple installation, repeatability and reliability. The PT46X5 transmitters provide the industry standard 0 - 5 Vdc amplified signal designed to work with DCS and PLCs, 1 - 6 Vdc outputs are also available. The PT46X5 comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X5 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Dynisco pressure transmitter Melt Pressure Sensors with Voltage Outputs PT46X6/ MDT460 Melt Pressure Sensors

• 0 - 10 Vdc and 1 - 11 Vdc outputs

The PT46X6 Series transmitter is a ±0.5% sensor ideal for general purpose melt pressure measurements requiring simple installation, repeatability and reliability. The PT46X6 transmitters provide the industry standard 0 - 10 Vdc amplified signal designed to work with DCS and PLCs, 1 - 11 Vdc outputs are also available. The PT46X6 comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X6 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

49. Dynisco pressure transmitter Melt Pressure Transmitters with mA Outputs

Dynisco pressure transmitter Melt Pressure Transmitters with mA Outputs Echo Melt Pressure Sensors

Dynisco pressure transmitter Melt Pressure Transmitters with mA Outputs MDT422 Melt Pressure Sensors

• Installation for media temperature up to 400°C

• Flexible capillary between rigid stem and housing

• Electrical built- in calibration

• Various high level outputs

• 4- 20 mA, 2- wire 0- 10 V DC, 3/ 4- wire and other volt output signal ranges

Dynisco' s MDT- series amplified transducers convert process pressure into an amplified signal for long distance transmission free of noise interference. All models are available in 4- 20 mA, 0- 5 VDC and 0- 10 VDC, 2- , 3- and 4- wire high level outputs. Many of the features found in Dynisco' s standard MDA- series have been incorporated into the amplified MDT- series, including proven bonded strain gauge construction for stable operation, a flexible armored capillary between the rigid stem and the amplifier housing and a flush diaphragm. Another advantage is the electrical built- in calibration.

Dynisco pressure transmitter Melt Pressure Transmitters with mA Outputs PT140 General Purpose Melt Pressure Sensors

• Value series

• Surface mount technology

• 3 mV/ V, 5 Vdc, 10 Vdc or 4 to 20 mA

• Spherical diaphragm design

• Generous quantity discounts

Dynisco’s 100 Series models are built to handle the extreme environments of hydraulic applications and corrosive media. The contoured pressure sensing diaphragm ensures greater accuracy and provides longer operating life. An internal shunt calibration provides quick transducer and system calibration. A choice of 3 mV/ V, 5 V, 10 V or 4 to 20 mA outputs is offered.

Dynisco pressure transmitter Melt Pressure Transmitters with mA Outputs PT46X4 ' A' Series

• Auto- Zero functionality

• Accuracy better than ± 0.5%

• No span or zero pots

• No calibration required

• Repeatable, reliable pressure measurements

• Superior abrasion resistance

• Direct input to supervisory control systems

• Wide variety of pressure ranges

• Ready to use out of the box, just Auto- Zero

The PT46X4 “A” Series transmitter is a ± 0.5% sensor ideal for general melt pressure measurements requiring simple installation, repeatability and reliability. The PT46X4 “A” Series transmitters provide the industry standard 4 - 20 mA amplified signal designed to work with DCS and PLCs. The PT46X4 “A” Series comes equipped with the NEW Auto- Zero functionality. Auto- Zero provides the user the ability to install the transmitter right out of the box with just using the zero push button after installation. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X4 “A” Series features a 1/ 2- 20 UNF thread for simple and easy installation in standard transducer mounting holes.

Dynisco pressure transmitter Melt Pressure Transmitters with mA Outputs PT46X4/ MDT460 Melt Pressure Sensors

The PT46X4 Series transmitter is a

±0.25%

DyMax®

 ±0.5% sensor ideal for general melt pressure measurements requiring simple installation, repeatability and reliability. The PT46X4 transmitters provide the industry standard 4 - 20 mA amplified signal designed to work with DCS and PLCs. The PT46X4 comes equipped with adjustable zero and span pots. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X4 features a 1/ 2- 20 UNF thread for simple and easy installation in standard transducer mounting holes.

Dynisco pressure transmitter Melt Pressure Transmitters with mA Outputs Vertex Mercury Free Sensors

• The first and only 4- YEAR WARRANTY.

Vertex sensors are available with 3.33mV/ V or 4- 20mA output signals and designed to work with universal pressure indicators. An optional J- type thermocouple is available to provide a melt temperature signal. Vertex is equipped with a 1/ 2- 20 UNF for installation in standard transducer mounting holes.

50. Dynisco pressure transmitter Smart Transmitters ( HART)

Dynisco pressure transmitter Smart Transmitters ( HART) 2280/ 2281 General Purpose Sensors

• HART™ digital communication

• Better than ±0.25% combined error

• 4 - 20 mA loop- powered output

• 0 - 250 to 0 - 72, 500 psi

• Explosion Proof and ATEX/ Intrinsically Safe approved

• Meets PED and CE requirements

The SPX2281 is a smart industrial 4 - 20 mA pressure transmitter designed for use in hazardous locations. The standard SPX2281 is an all welded construction that features a 1/ 2- 14 NPT male thread for installation. Models are available in PSIG, PSIA and PSIS. Optional pressure fittings and electrical terminations are available. The SPX2281E has explosion proof approval for Class 1, Division I, Groups A, B, C & D. The explosion proof model employs a conduit fitting. The SPX2281S is ATEX/ Intrinsically Safe approved for II 1 G 100a Eex ia IIC, Zones 0 and 1. The ATEX/ Intrinsically Safe models can be supplied with either a conduit fitting or a hermetic 6 pin bendix connector.

Dynisco pressure transmitter Smart Transmitters ( HART) SPX - Smart Pressure Transmitters for Threaded Installations

• SPX4222

• 0 - 250 to 0 - 30, 000 psi

• ATEX/ Intrinsically Safe approved

• Â

• SPX4622

• Better than ±0.5% combined error

• 0 - 1, 500 to 0 - 30, 000 psi

The SPX4222 is a smart 4 - 20 mA pressure transmitter designed for use in hazardous locations. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLCs, computers and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature. The SPX4222S is ATEX/ Intrinsically Safe approved for II 1 G 100a Eex ia IIC, Zones 0 and 1. The SPX4222 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Â

The SPX4622 is a smart 4 - 20 mA pressure transmitter designed for use in hazardous locations. These amplified transmitters eliminate the need for external signal conditioning. All models can interface directly with distributed control systems, PLCs, computers and similar high level control devices. Optional thermocouple or RTD configurations are available to provide melt temperature. The SPX4622S is ATEX/ Intrinsically Safe approved for II 1 G 100a Eex ia IIC, Zones 0 and 1. The SPX4622 features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.

Dynisco pressure transmitter Smart Transmitters ( HART) SPX- L Series: High Accuracy, HART Pressure Transmitter with Dynalarityâ„¢

• Wide variety of process connectors

• Improved accuracy with DynaLarity™ to a combined error of ±0.20% FSO

• HART™ digital communications

• ATEX Intrinsically Safe for hazardous environments

• FM & CSA approved Explosion Proof for hazardous environments

• 0 – 250 to 0 – 30, 000 psi customer- defined ranges

• 4- 20 mA loop powered output supplied directly to DCS or PLC

The SPX- L is a smart 4- 20 mA pressure transmitter designed for use in hazardous locations. The SPX- L includes the Dynisco innovation, DynaLarityâ„¢, an advanced algorithm that linearizes off- sets initiated by materials and process variables. DynaLarityâ„¢ improves linearity by 80% and combined accuracy by 25% over the base model SPX. Optional thermocouple or RTD configurations are available to provide melt temperature.

Dynisco pressure transmitter Smart Transmitters ( HART) SPX- T - High Accuracy Smart Pressure Transmitters with Temperature Compensation

• 1/ 2- 20 UNF thread pressure transmitter

• Reduce temperature drift by ~80% over non- compensated units

• Accuracy to ±0.25% FS

• Temperature output available ( RTD or 4- 20mA)

• 0- 500 to 0- 10, 000psi range options

• Rugged welded electronics housing

The SPX- T is a smart 4- 20mA pressure transmitter that includes Temperature Compensation and DynaLarityâ„¢, a Dynisco innovation. The SPX- T delivers the best spec performance in the line. Temperature Compensation is based on an RTD measurement that compensates for temperature variations which reduces temperature- related drift and increases accuracy. No need to re- zero for temperature changes after installation. DynaLarity uses an advanced algorithm that will linearize offsets due to process effects on the sensor. Combined Temperature Compensation and DynaLarity reduces temperature- related drift by as much as 80% and improves accuracy by more than 60% over other sensors. Process temperature output is available. HART communication is standard. The SPX3242 is an all- welded construction that features a 1/ 2- 20 UNF thread for installation in standard transducer mounting holes. Many other threaded configurations are available.


Company Contact:


  • Phone: 862885218395

  • Address: Huayangnian,huahaoyuan community,Jitou Town, Wuhou, Chengdu, China

  • Email: Email


Published date: December 4, 2015 -

  • Business Description: Established in 2003, Contranspower Co., Ltd was an integrated trading, technology and service company engaged in retail and wholesale of international automotive products, imported hydraulic and pneumatic components, instruments, meters and various kinds of valves and valve accessories. With establishing partnerships with many international leading manufactures, we can provide customers with a comprehensive range of high quality services from process control valve accessories, petroleum and chemical instruments and meters to industrial automation.We possess extensive knowledge in technical requirements of related projects and capacity in equipment selection. We has leading expertise in petroleum and natural gas, petroleum chemical, refining, pulp and paper manufacture, water treatment and various process industries. The company is the agent for following recognized international brands:Parker Automatic, USA (hydraulic, pneumatic, EMD, CIC, instruments and meters, flow connectors, etc.); explosion proof solenoid valves from ASCO (USA), Kaneko, Konan SMC and CKD (Japan); electrical, hydraulic and pneumatic drives from TYCO BIFFI (USA); Cameron combined hydraulic pneumatic mechanisms, limit switches from WESTLOCK, AVID, HONEWELL (UK) and AZBIL(Japan), valve position controllers from ABC, Siemens, SMC and AZBIL;Borsch Rexroth (Germany), FESTO hydraulic and pneumatic components and Nass coils (German) and so on.
    In industrial automation area, the company offers following leading products and services:
    Valves, actuators and accessories (mainly for project cooperation)
    The company is the selling agent for flow drives (with imported BIFFI) from Cameron and Tyco (USA); Ledeen pneumatic actuators and electrical actuators, and pneumatic hydraulic interlocked actuating mechanism; TYCO AVID valve accessories: filter regulator, solenoid valve; Westlock and AVID value limit switch;and electrical/pneumatic and pneumatic/pneumatic localizers from ABB, Siemens, SMC, AZBIL (Japan) and YAMATAKE.We also can collaborate with customers in projects with selecting high quality and proven products and supplying complete equipments according to customer specific requirements.
    Automatic instruments (including project cooperation)
    To provide instruments, meters, automatic devices, filters, flow connectors, seals, etc. components and parts from the international industrial leader Parker (Parker Hannifin);ASCO explosion proof solenoid valves; Honeywell limit switches (USA), Herion explosion proof solenoid valve (Germany), and transformers, transducers, rasters, isolated gates, flow meters and controllers from TURCK, P+F, Burkert and other domestic and international recognized manufacturers.
    Parker, BEKO etc. imported complete filter series and flow detection products
    Only for filter, we can provide more than 5000 kinds of interchangeable components and parts of different brands and provide spare parts supporting services.
    Pneumatic components and generic flow controlling valves
    Products from Usa, German, Japan, UK and Korean leading manufactures such as PARKER, ASCO JOUCOMAITC, BOSCH, AIRTEC, KANEKO, SMC, CKD, NORGREN, FESTO and YTC; and equivalent products of domestic leading manufacturers.These products includes various solenoid valves, pneumatic valves, proportioning valves (flow pressure), cylinders, special cylinders, pressure switches, sensors and filter/pressure regulator assemblies.
    Hydraulic components and parts and medium small sized system retrofitting
    Hydraulic components and parts and whole sets of Parker hydraulic (including engineering hydraulic), Bosch Rexroth, Atos, Rexroth China, Vickers, Moog and equivalents of domestic manufacturers.We also provide medium small sized system retrofitting services for customers in Sichuan and adjacent provinces.
    We hope to have the opportunity to work with you and we will make every effort to satisfy your requirements!

Related listings



  • Kaneko Solenoid Valve 2 Way M30 Series
    Kaneko Solenoid Valve 2 Way M30 Series
    Power Tools - Contranspower Co., Ltd - China - December 4, 2015 - contact company for price

    Feature â–ª Pilot valve and main valve because it directly, you can use 0 or differential pressure. â–ª For the same seat diameter and small diameter pressure loss is known. â–ª We also manufacture certified high- pressure gas. Precautions â–ª Permis...

  • Kaneko Solenoid Valve 2 Way M20 Series
    Kaneko Solenoid Valve 2 Way M20 Series
    Power Tools - Contranspower Co., Ltd - China - December 4, 2015 - contact company for price

    M20 SERIES Feature ▪ Mass flow rate can be obtained even in a small size. ( Cv value: Up to 12.6) ▪ Mounting orientation freedom. ( 360 ℃) Precautions ▪ For pilot- operated, should be able to ensure minimum operating differential pressure 0.0...

  • Abb Pressure Transmitter Deltapi N Series
    Abb Pressure Transmitter Deltapi N Series
    Power Tools - Contranspower Co., Ltd - China - December 4, 2015 - contact company for price

    The Deltapi N series pneumatic transmitters provides a standard output pressure signal from a variety of inputs: flow, pressure, differential pressure or level of liquids, steam, gas or air. The transmitter may be divided into two main units: the mea...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"