Nup2200 Cylindrical Roller Bearingskfnup2322e Skfbc2b322969 Hb1 Skfnu2322e Skfbcrb322250 Skfbcrb3227 - Chinaprice: contact company for price
NACHI, NTN, NMB
About cylindrical roller bearing
Cylindrical roller bearings mostly consist of the cage, the rollers and guided by two capped edges on a ring.
It is a separable bearing, convenient for it's assembly and disassembly especially it has the advantages in a condition
that the interference is required and assorted with inner ring, outer ring and housing.
The bearing of this type can normally take the radial load, on the other hand, single row cylindrical roller bearing
with ribbed inner ring and ribbed outer ring can take smaller axial load or intermittent axial load,
this kind of bearing has a larger carrying capacity of axial load compare with the deep-grooves ball bearing. The structure of the bearing showing that it runs very well under high rotational speed.
Cylindrical roller bearings without outer ring capped edge
The NU cylindrical roller bearing has double capped edges on outer ring and without capped edge on inner ring
The N cylindrical roller bearing has double capped edges on inner ring and without capped edge on outer ring
The NU and N cylindrical roller bearings, the shaft is allowed two-way displacement toward the bearing box, i.e. the cylindrical roller bearings can bear the change of shaft length due to thermal expansion.
Thus It is suitable to serve as a non-fixed bearing. It can bear larger radial load, but cannot take axial load.
Cylindrical roller bearings with capped edge on both outer ring and inner
The NJ cylindrical roller bearing has double capped edge on outer ring and single capped edge on inner ring.
The NF cylindrical roller bearing with the single capped edge on outer ring & double capped edges on inner ring
The NJ & NF cylindrical roller bearing, the axial-displacement of the shaft or housing on one-direction can be limited.
The one-direction axial positioning can be reached. It can burden smaller axial load from one-direction.
The NUP cylindrical roller bearing with double capped edges on the outer ring & with capped edge on one side of the inner ring,
as well as with inner ring loose rib on the other side of the inner ring. The two-way axial positioning toward the shaft can be reached. The bearing can bear two-way axial force. The NUP & N cylindrical roller bearings can be chosen for the structure.
The NJ and HJ cylindrical roller bearing with separate thrust collar is similar to the NUP cylindrical roller bearing,
it can be used as the fixed (positioning) bearing..
Cylindrical roller bearings without inner ring or without outer ring
The RNU cylindrical roller bearing has an outer ring with double capped edges but does not come with inner ring.
Such bearing is the NU cylindrical roller bearings without the inner ring
The RN cylindrical roller bearing has an inner ring with double capped edge but does not come with outer ring.
The RNU and RN cylindrical roller bearing are used with a component having a limitation on radial dimension.
The axial journal or the surface of the housing bore can be used as the raceways.
The hardness and the machining precision as well as the surface quality should be same as the raceways of the inner ring and the outer ring.
Cylindrical roller bearings with full complement (rollers)
Using double capped edges on the outer ring and single capped edges on the inner ring. i.e. type of NJ.V, NUP.V, RNU.V, etc.
It has the advantage of great load rating and simple structure in comparison with the roller bearing which has the similar structure and has cage.
In condition that rotation speed and working temperature is not high, good lubrication condition
and the cleanliness of the bearing box is also relatively good then it has the first priority to use of the full complement (rollers) structure.
Full complement cylindrical roller bearing
The dimensions of E type cylindrical roller bearing are same as the dimensions of the ordinary type.
But the load carrying capacity is increased accordingly due to the increasing of the diameter of rollers, the length and the number of rollers.
An additional 'E' is added at the end of the designation to represent this kind of cylindrical roller bearings,
besides the diameter of the roller's inscribed circle is difference from the ordinary type bearings.
It cannot be replaced by the ordinary type bearings. ( SL BEARING SERIES ) China Cylindrical Roller Bearing s,
Cylindrical Roller Bearing manufacuturer Supplier, Factory, Exporter in china
- Posted By: Shanghai CKF Bearing Co.,Ltd
- Phone: 8602131375585
- Address: Room 2818, No.6, Lane 188, 1st Ring Road, Shanghai, shanghai, China
Published date: April 7, 2013 -
- Business Description: involved in international trade import export of goods, products, and services
High Precision Timken Tapered Roller Thrust Bearing T1880Bearings - Ball - Shanghai CKF Bearing Co.,Ltd - China - April 7, 2013 - contact company for price
Product Model T63 & T63W T110 & T110W T144 & T144W T188 & T188W T309 & T309W T611 T1115 T7010V T53250 T76 & T76W T113 & T113W T149 & T149W T189 & T189W T311 T651 T1120 T7519 T77 & T77W T119 & T119W T151 & T151W T193 & T193W T350 T660V T1260 & T1260W ...
Cross Roller Bearing Sx011840Bearings - Ball - Shanghai CKF Bearing Co.,Ltd - China - April 7, 2013 - contact company for price
2012 Rich stock! Cross-Roller bearing SX011840 Specification: Cross-roller bearings are bearings for precison applications that correspond in their dimensions to ISO dimension series 18 in accordance with DIN 616. They comprise outer rings, inner rin...
Ntn Angular Contactball Bearing Hta952uadbBearings - Ball - Shanghai CKF Bearing Co.,Ltd - China - April 7, 2013 - contact company for price
2012 On sale! NTN Angular contact ball bearing for axial loads HTA952UADB Descriptions: NTN provides a range of thrust bearings for the main spindles. This includes 5629 series and 5620 series for high axial rigidity (cotact angle 60 ° ) and HTA U(A)...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce