Double Row Full Complement Cylindrical Roller Bearings - Chinaprice: contact company for price
maximum number of rollers and are therefore suitable for very heavy
radial loads. However, they cannot operate at the same high speeds as
caged cylindrical roller bearings. HYJG® double row full complement
cylindrical roller bearings are produced as standard in four designs,
three open designs and one sealed. All the bearings are non-separable
and have an annular groove and three lubrication holes in the outer ring
to facilitate efficient lubrication. NNCL design NNCL design bearings
have an inner ring with three integral flanges and a flangeless outer
ring. A retaining ring, inserted in the outer ring between the roller
rows, keeps all bearing components together. Axial displacement of the
shaft relative to the housing in both directions can be accommodated
within the bearing. The bearings are therefore suitable for non-locating
bearing positions. NNCF design NNCF design bearings have three integral
flanges on the inner ring and one integral flange on the outer ring
enabling the bearing to provide axial location for a shaft in one
direction. A retaining ring is inserted in the outer ring at the side
opposite the integral flange and serves to hold the bearing together.
NNC design bearings are equipped with the same inner ring as bearings of the NNCL and NNCF design. The outer ring is split and held together by retaining elements, which should not be loaded axially. Both parts of the outer ring are identical and carry one integral flange, enabling the bearing to locate the shaft axially in both directions.
NNF design bearings in the NNF 50 and 3194(00) series are always sealed on both sides and filled with grease. The two-piece inner ring has three integral flanges and is held together by a retaining ring. The outer ring has an integral central flange. The bearings can be used to locate a shaft axially in both directions. Because of the large distance between the two rows of rollers, the bearings are also able to accommodate tilting moments.The outer ring of an NNF bearing is 1 mm narrower than the inner ring and has two snap ring grooves in the outside diameter. Therefore it is possible to eliminate the need for spacer rings between the inner ring and adjacent components, for example, in rope sheaves .The bearings have contact seals made of polyurethane (AU) on both sides. The seals are retained on the inner ring shoulders, to provide efficient sealing at this position. The outer sealing lip exerts a slight pressure on the outer ring raceway.The bearings are filled with grease with a lithium thickener with diester base oil, which has good rust inhibiting properties. The base oil viscosity is 15 mm2/s at 40 °C and 3, 7 mm2/s at 100 °C. The grease is suitable for temperatures between –55 and +110 °C. However, the permissible temperature range is limited by the seal material, from –40 to +80 °C.Under certain conditions, sealed NNF design bearings are maintenance-free, but if they operate in a moist or contaminated environment, or if speeds are moderate to high, they must be relubricated. This can be done through the inner as well as the outer ring.If bearings with one or no seals are required, the seals may be removed easily with a screwdriver. For applications where oil lubrication is to be used, the bearings can be delivered without seals and grease if economic quantities are involved. Otherwise the seals should be removed and the bearings washed before use. If oil lubrication is used, the limiting speed quoted in the product tables can be increased by approximately 30 %.
Double Row Full Complement Cylindrical Roller Bearings
For any questions and needs please contact us below
- Posted By: Shenzhen, guangdong DongShun trade co., LTD
- Phone: 075533475486
- Address: Guangdong shenzhen district no. 202, Shenzhen, China
Published date: September 6, 2012 -
- Business Description: Companies adhering to the "integrity management, friendly cooperation, mutual reciprocity and mutual benefit," the purpose, sincere and each manufacturer and agent cooperation, actively explore the market, common better career development.
Single Row Full Complement Cylindrical Roller Bearings Class Rollers LineBearings - Roller - Shenzhen, guangdong DongShun trade co., LTD - China - September 6, 2012 - contact company for price
Single row full complement cylindrical roller bearings Feature: Single row full complement cylindrical roller bearings have a maximum number of rollers; therefore, they can accommodate heavy radial loads. However, they are not suitable for the bearin...
Double Row Full Complement Cylindrical Roller Bearings Speeds Heavy ReachBearings - Roller - Shenzhen, guangdong DongShun trade co., LTD - China - September 6, 2012 - contact company for price
Double row full complement cylindrical roller bearings Feature: double row full complement cylindrical roller bearings have a maximum number of rollers; therefore, they can accommodate heavy radial loads. However, they are not suitable for the bearin...
The Carb Toroidal Roller BearingBearings - Roller - Shenzhen, guangdong DongShun trade co., LTD - China - September 6, 2012 - contact company for price
The CARB toroidal roller bearing The CARB toroidal roller bearing is a completely new type of radial roller bearing. This compact self-aligning roller bearing was developed by HYJG and introduced on the market in 1995. In a unique design, it combines...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce