1000base T Sfp Transceiver - Chinaprice: contact company for price
port and one copper port(RJ45).CISCO Compatible.
Baudcom’s BDTR-GB-PxRC Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.
Up to 1.25Gbps bi-direction data links
100m transmission over unshielded twistedpair (UTP) Category 5 Cable
Support intelligent auto-negotiation 1000BASE-T operation in host systems with
SFP/GBIC form with compact RJ-45 connector
Very low EMI and excellent ESD protection
+3.3/5V Single power supply
High-Speed Electrical Interface
All high-speed signals are AC-coupled internally.
Table 3. High-speed electrical interface, transmission line-GBIC
High-Speed Electrical Interface Transmission Line-GBIC
Parameter Symbol Min Typ Max Units Notes/Conditions
Line Frequency fL 125 MHz 5-level encoding, per IEEE 802.3
Tx Output Impedance Zout, TX 100 Ohm Differential, for all Frequencies between 1MHz and 125MHz
Rx Input Impedance Zin, RX 100 Ohm Differential, for all Frequencies between 1MHz and 125MHz
High-speed electrical interface, host-GBIC
Table 4. High-speed electrical interface, host-GBIC
High-Speed Electrical Interface, Host-GBIC
Single ended data input swing Vinsing 250 1200 mV Single ended
Single ended data output swing Voutsing 350 800 mV Single ended
Rise/Fall Time Tr, Tf 175 psec 20%-80%
Tx Input Impedance Zin 50 Ohm Single ended
Rx Output Impedance Zout 50 Ohm Single ended
Table 5. General specifications
Data Rate BR 10 1, 000 Mb/sec IEEE 802.3 compatible.
See Notes 2 through 4 below
Cable Length L 100 m Category 5 UTP. BER <10-12
1. Clock tolerance is +/- 50 ppm
2. By default, the BDTR-GB-P is a full duplex device in preferred master mode
3. Automatic crossover detection is enabled. External crossover cable is not required
4. 1000 BASE-T operation requires the host system to have an SGMII interface with no clocks, and the module PHY to be configured per Application Note AN-2036. With a SERDES that does not support SGMII, the module will operate at 1000BASE-T only.
Table 6. Environmental specifications
Operating Temperature Top 0 85 °C Case temperature
Storage Temperature Tsto -40 85 °C Ambient temperature
Switch to Switch interface
Switched backplane applications
- Phone: 862137709251
- Address: Room1301,No45, Lane 1505, Mei jia bang Road, Song , Shanghai , China
- Website: http://www.baudcom.com.cn
Published date: August 2, 2013 -
- Business Description: Shanghai Baudcom Communication Device Co.,Ltd. is the leading
manufactures and exporters from Shanghai, China. It is a high tech
company that specializes in researching, developing, manufacturing and
marketing data communication products.
Baudcom products include 10/100M Managed Media Converter,10/100/1000M Managed Media Converter, 4E1/8E1/16E1 PDH fiber optical Multiplexer, Telephone/Video/Data fiber multiplexer,Digital Vedio audio optical multiplexer, 4/8/16/32channel voice optical multiplexer,E1/V35/RS232 Fiber modems,voic10/100M+V.35/4E1/RS232/FXO(S) integrated optical transimission multiplexer, 1E1/4E1/8E1 to Ethernet protocol converter,V.35 to 10/100M converter,E1/V35/Ethernet G.SHDSL modem, TDM over IP,8/16 channels CWDM platform,SFP modules,SFF transceiver,1x9 transceiver and so on.
Fiber Optical Distribution BoxFiber Optic Cable - Shanghai Baudcom Communication Device Co,.Ltd - China - August 2, 2013 - contact company for price
Fiber Optical Distribution Box, The fiber terminal is used to connect the fiber in the house and it can be hanged on the wall or fixed on the floor. Description: The fiber terminal is used to connect the fiber in the house and it can be hanged on the...
Optical Splice ClosureFiber Optic Cable - Shanghai Baudcom Communication Device Co,.Ltd - China - August 2, 2013 - contact company for price
Optical Splice Closure, can provide Cap Sealed Style (96 Cores fiber), K Style (144 Cores fiber ), Sealing Style(436 Cores fiber). Applications: can be used in outside plant, underground, aerial, pedestal and direct buried applications. The device al...
1x9 Wdm Optical TransceiverFiber Optic Cable - Shanghai Baudcom Communication Device Co,.Ltd - China - August 2, 2013 - contact company for price
1X9 WDM Optical Transceiver，Single mode single fiber bi- directional transmissionUp to 20Km/40km/60km/80Km. Baudcom, BDTR-303 transceiver is a series single mode single fiber module designed for optical data communication applications. It is e...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce