64 visiting now: 26 China China flag 19 France France flag 12 USA USA flag 2 Sweden Sweden flag 1 Malaysia Malaysia flag 1 Russia Russia flag 1 UK UK flag 1 Germany Germany flag 1 Indonesia Indonesia flag

High Frequency Screen Mineral - China

price: contact company for price

High Frequency Screen

FOB Price: US $1, 759 - 36, 985 / Set

Port: Qingdao, Tianjin, Shanghai or others

Minimum Order Quantity: 1 Set Negotiable

Supply Ability: 100 Sets per , month as your request

Payment Terms: L/C, D/A, D/P, T/T, Western Union

Quick Details

Place of Origin: China (Mainland) Brand Name: Hongxing Model Number: GPS series

Condition: New After-sales Service Provided: Overseas service center available Certificate: ISO9001:2008

Type: Separator Application: Ore Motor power: 0.72-2.2 kw

Color: orange Warranty: 1 year

Hongxing brand is rated as 'China Famous Brand' for superb performance.

Packaging & Delivery

Packaging Detail: Standard containers, bare main machine, motors and small parts are packed in wooden cases.

Delivery Detail: Within 10 days after receiving the down payment.


2013 new design high frequency screen 1. High efficiency 2. Small amplitude 3. High frequency of screening 4. Low energy cost


High frequency screen used nylon or stainless steel plate, is essential mineral granular election equipment.

High frequency mineral screen has the feature of high efficiency, small amplitude, and high frequency of screening.

Different from the general principle of sieving equipments, high frequency mineral screen uses high frequency; on the one hand, it can destroy the surface tension of pulp and fine materials high-speed.

Oscillating on the sieve surface. On the other hand, the high frequency mineral screen can accelerate large density useful minerals and analysis, increase probability of the separation granular materials.

Contacting with the sieve hole. Thus result in better conditions, and can make the separation granular materials especially the large proportion of the materials and the pulp to be sieve products through sieve hole.

Mineral high frequency screen Physical principles

Vibration - either sinusoidal vibration or gyratory vibration.

Sinusoidal Vibration occurs at an angled plane relative to the horizontal. The vibration is in a wave pattern determined by frequency and amplitude.

Gyratory Vibration occurs at near level plane at low angles in a reciprocating side to side motion.

Gravity - This physical interaction is after material is thrown from the screen causing it to fall to a lower level. Gravity also pulls the particles through the screen cloth.

Density - The density of the material relates to material stratification.

Electrostatic Force - This force applies to screening when particles are extremely dry or is wet.

Mineral high frequency screen Screening terminology

Like any mechanical and physical entity there are scientific, industrial, and layman terminology. The following is a partial list of terms that are associated with mechanical screening.

Amplitude - This is a measurement of the screen cloth as it vertically peaks to its tallest height and troughs to its lowest point. Measured in multiples of the acceleration constant g (g-force).

Acceleration - Applied Acceleration to the screen mesh in order to overcome the van der waal forces

Blinding - When material plugs into the open slots of the screen cloth and inhibits overflowing material from falling through.

Brushing - This procedure is performed by an operator who uses a brush to brush over the screen cloth to dislodged blinded opening.

Cloth, screening cloth - it is the material defined by mesh size, which can be made of any type of material such steel, stainless steel, rubber compounds, brass, etc.

Contamination - This is unwanted material in a given grade. This occurs when there is oversize or fine size material relative to the cut or grade. Another type of contamination is foreign body contamination.

Oversize contamination occurs when there is a hole in the high frequency ore screensuch that the hole is larger than the mesh size of the screen. Other instances where oversize occurs is material overflow falling into the grade from overhead, or there is the wrong mesh size screen in place.

Fines contamination is when large sections of the screen cloth are blinded over, and material flowing over the screen does not fall through. The fines are then retained in the grade.

Foreign body contamination is unwanted material that differs from the virgin material going over and through the screen. It can be anything ranging from tree twigs, grass, and metal slag to other mineral types and composition. This contamination occurs when there is a hole in the scalping screen or a foreign material's mineralogy or chemical composition differs from the virgin material.

Deck - a deck is frame or apparatus that holds the screen cloth in place. It also contains the screening drive. It can contain multiple sections as the material travels from the feed end to the discharge end. Multiple decks are screen decks placed in a configuration where there are a series of decks attached vertically and lean at the same angle as it proceeding and exceeding decks.

Multiple decks are often referred to as single deck, double deck, triple deck, etc.

Frequency - Measured in hertz (Hz) or revolutions per minute (RPM). Frequency is the number of times the screen cloth sinusoid ally peaks and troughs within a second. As for a gyratory screening motion it is the number of revolutions the screens or screen deck takes in a time interval, such as revolution per minute (RPM).

Gradation, grading - Also called 'cut' or 'cutting.' Given a feed material in an initial state, the material can be defined to a have a particle size distribution. Grading is removing the maximum size material and minimum size material by way of mesh selection.

Shaker - A generic term that refers to the whole assembly of any type mechanical screening machine.

Stratification - This phenomenon occurs as vibration is passed through a bed of material. This causes coarse (larger) material to rise and finer (smaller) material to descend within the bed. The material in contact with screen cloth either falls through a slot or blinds the slot or contacts the cloth material and is thrown from the cloth to fall to the next lower level.

Mesh - Mesh refers to the number of open slots per linear inch. Mesh is arranged in multiple configurations. Mesh can be a square pattern, long-slotted rectangular pattern, circular pattern, or diamond pattern.

Scalp, scalping - this is the very first cut of the incoming material with the sum of all its grades. Scalping refers to removing the largest size particles. This includes enormously large particles relative to the other particle's sizes. Scalping also cleans the incoming material from foreign body contamination such as twigs, trash, glass, or other unwanted oversize material.

Company Contact:

  • Phone: 8637167833171

  • Address: Tanxiang Road, Zhengzhou, China

  • Email: Email

Published date: July 12, 2013 -

  • Business Description: Henan Hongxing Mining Machinery Co., Ltd. is a joint stock mining

    machinery manufacturing enterprise integrated in scientific research,

    production and marketing. It is located at the High & New Technology

    Industries Development Zone of Zhengzhou, China with an area of 50,000

    m2 which includes 15,000 m2 of standard heavy duty industrial workshop.

    Equipment are more than 160 pieces, including large and medium sized

    metal processing, riveting and installing equipment. There are 960

    workers including 80 administrators with secondary and senior

    occupational titles and engineering technicians.

Related listings

  • Sino Laser Engraving Cutting Machne
    Sino Laser Engraving Cutting Machne
    Manufacturing - Jinan Sino waterjet technology Co., Ltd - China - July 12, 2013 - contact company for price

    SINO Laser Cutting Machine work with Co2 Laser, it is used for cutting wooden plate, acrylic, paper, plastic, rubber and other no-metal materials for complex shape. SINO low cost Laser Cutter is useful in many products such as air plane model, advert...

  • Sino Wood Cnc Router Sn1325
    Sino Wood Cnc Router Sn1325
    Manufacturing - Jinan Sino waterjet technology Co., Ltd - China - July 12, 2013 - contact company for price

    SINO series CNC Woodworking Router adopt steel structure body, use Rack and Pinion and Linear Guide ways, are equipped with high speed water cooling spindle (or HSD air cooling spindle) and High speed stepper motor( or Japan Servo motor), advanced CN...

  • Ball Mill Making Equipment
    Ball Mill Making Equipment
    Manufacturing - Henan Hongxing Mining Machinery Co., Ltd. - China - July 12, 2013 - contact company for price

    FOB Price:US $7, 936 - 676, 200 / Set Port:Qingdao, Tianjin, Shanghai, Lianyungang or others Minimum Order Quantity:1 Set Supply Ability: 100 Sets per month as request Payment Terms: L/C, D/A, D/P, T/T, Western Union Quick Details Condition:New Type:...

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"