31 visiting now: 12 France France flag 8 USA USA flag 7 China China flag 3 Sweden Sweden flag 1 Italy Italy flag

6 Station Tyre Post Cure Inflation Device - China

price: contact company for price

1. Technical date

1.1 Equipment name: 6 station tyre inflation device

1.2 Dimension and weight: 6868×1200×2200

Overall dimension( length×width×height: 6868×1200×2200

Equipmet total weight: 3700KG

1.3 Main technical parameters

Locking form: Inner- retangular teeth locking

Drive method: Motor, cylinder

Diameter of apply tyre rim: 22.5”—24”

Tyre outside diameter: min1000mm max1300mm

Rim width: min160mm max260mm

Motor: 0.4KW 380V 50HZ 1400r/ min

Reducer: 1: 5

Compressed air pressure: 0.8MPa

Main electrity: AC380V 50HZ

Solenoid valve power: DC24V

Control loop: DC24V

2. Technical requirement

2.1 Each station can be operated indepently.

2.2 Each station has independent air regulator and pressure gauge.

2.3 Air pressure can be relieved individually in case of malfunction.

2.4 Tyre lifting device lifts the tyre to rim close position, and the lifting height is controlled by sensors. Whenever tyre size is changed, the sensor position should be adjusted accordingly.

2.5 Button box in every rim can be operated with all actions.

2.6 Sound- light indicator alarms automatically when the cycle finished.

3. Configuration requirement

3.1 PLC: Siemens

3.2 Touch panel: Siemens

3.3 Solenoid valve: SMC

3.4 Approximate Switch: Omron

3.5 Buttons: Schneider made in china

4. Post cure inflation locking and unlocking safe operation

4.1 The locking pneumatic cylinder is controlled by buttons. The signal is sent first to PLC then to solenoid valve. The solenoid valve will release compressed air to push cylinder and then rotate the spindle, and finally complete locking and unlocking actions.

4.2 Photoelectric sensors are installed at the locking & unlocking positions, and pressure sensor is installed on the chuck, which will send signal to PLC.

4.3 Air can be inflated into the tire only when the chuck is at the locking position. Auto or manual air inflation operations will be invalid when the chuck is at unlocking or middle positions due to no locking signal sent to PLC.

4.4 When there is pressure inside the tire, the pressure sensor will send signal to PLC, so that unlocking operations cannot be done. That is to say, the unlocking operation will be valid only when pressure inside the tire is zero .

Company Contact:

  • Phone: +86-532-87879188

  • Address: Changbaishan Road, Airport Industrial Park, Chengy, Qingdao, China

  • Email: Email

Published date: July 28, 2014 -

  • Business Description: We are a company specially manufacturing for tire vulcanizing machine

    and mold. Our main products: tire mold, bias tire mold, segment tire

    mold, two piece tire mold, all steel giant tire mold, semi steel

    segmented tyre mould, truck tire mold, agricultural tire mold, tire

    curing press, tire vulcanizer, tire vulcanizing machine, mechanical tire

    curing press, hydraulic tire vulcanizing machine, twin press, double

    molds shaping press, all steel giant tire curing press, building drum,

    tire post cure inflation device and we also provide supporting services.

    We have the ability to develop powerful design, can design according to customer s request all kinds of tire vulcanizing machine, various special all steel giant vulcanizing machine, segment tire mold and so on. With the advantages of the electronic commerce, and good after sales service, in a short span of more than a year of time, its products are exported to Europe and the United States, South Korea, the Middle East and other countries, and established long term cooperation partnership.

    Our company was founded 23 years ago, we gain wide reputation due to our strong technical power, production experience, and essential testing method. There are over 40 engineers and technicians and over 150 workers in our co. We passed GB/T19001 2008/ISO 9001: 2008 quality management system certification. And we achieved advanced level in the field of all steel giant tire vulcanizing equipment and mold. We also cooperated with Qingdao Science and Technology University and Nanjing Industry University in development of new products and technical innovation. We get patent of all steel giant tire vulcanizer and segment mold in our country.

    Our products of all steel giant tire vulcanizing equipment (177 212 inch vulcanizer) and all steel giant tire mold(23r49 53/80r63) have a high market share and used by many tire factories in our country and be highly praised by the users.

    Our company regards reasonable prices, efficient production time and good after sales service as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.

Related listings

  • Ball Mill With High Performance
    Ball Mill With High Performance
    Manufacturing Plants - Gongyi machinery factory - China - July 28, 2014 - contact company for price

    Ball mill is widely used for dry or wet grinding process of various ores and other materials in cement, silicate products, new building materials, refractory, fertilizer, ferrous and non- ferrous metal and other industries. Usage and application of b...

  • Mechanical Tire Curing Press
    Mechanical Tire Curing Press
    Manufacturing Plants - Qingdao Fangyuanda Rubber Machine Co., Ltd. - China - July 28, 2014 - contact company for price

    Product Description 1. More than 20 years in rubber machine industry 2. This tire vulcanizing machine is mechanical translational and applicable to vulcanize the green tire, such as heavy & light truck radial tyre and bias tyre. 3. This tire is appli...

  • Semi Steel Or All Segment Tire Mold
    Semi Steel Or All Segment Tire Mold
    Manufacturing Plants - Qingdao Fangyuanda Rubber Machine Co., Ltd. - China - July 28, 2014 - contact company for price

    Product Description 1. More than 20 years in Segment Tire Mold industry 2. One of the biggest Segment Tire Mold suppliers in China 3. Segment Tire Mold made in our own factory 4. Get patent of All Steel Giant Segment Tyre Mould in China 5. All Steel ...

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"