Led Strip Lamp 2835 Performance Range Ip20 12v Constant Voltage - Chinaprice: contact company for price
>>>High- intensity LED light source
>>>Linear separable LED strip on flexible printed circuit board with >>>self- adhesive back
>>>Signage and illuminated advertising
Technical Operating Data
Product LEDs/ M Voltage Max Power* Radiance Angle Â° IP Grade Wavelenth CCT CRI/ Ra* Flux/ M
MF228X060A80â€DXXXXXA10 60 12V 14.4W 120 20 2700K 82 1000
MF228X060A80â€DXXXXXA10 60 12V 14.4W 120 20 3000K 82 1000
MF228X060A80â€DXXXXXA10 60 12V 14.4W 120 20 4000K 82 1100
MF228X120A80â€DXXXXXA10 120 12V 20.0W 120 20 2700K 82 1600
MF228X120A80â€DXXXXXA10 120 12V 20.0W 120 20 3000K 82 1600
MF228X120A80â€DXXXXXA10 120 12V 20.0W 120 20 4000K 82 1800
* ) All Data are related to the entire product
Due to the special conditions of the manufacturing processes of LED, the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data.
For more options about CCT ( for example 3500K ) , please contact our sales team by sending e- mail .
>>>Size of printed circuit board ( L* W* H) : 5000mm* 10mm* 2mm
>>>Max run length: 5 meters
>>>Smallest unit of 3 LEDs can be cut out at regular intervals without damaging the rest of the product
>>>Cinnection possible at the reel end or at the marked cut points
>>>Linear LED tape light on flexible printed circuit board with 3M self- adhesive back
>>>3 year limited warranty
>>>Up to 50, 000 hrs. lifespan for Tc<70â„ƒ
>>>UV, IR ray free
>>>UL & CE & RoSH certificated.
Minimum and Maximum Ratings
Operating Temperature at Tc point Â°C* Storage TemperatureÂ°C * Voltage Range V DC* Reverse Voltage V DC*
MF228X060A80- DXXXXXA10 11 ~ 13 13
MF228X120A80- DXXXXXA10 11~ 13 13
* ) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the product.
Exceeding maximum ratings for operating voltage will cause hazardous overload and will likely destroy the product.
The temperature of the LED module must be measured at the Tc- point according to EN60598- 1 in a thermally constant status with a temperature sensor or a temperature sensitive label. For exact location of the Tc- point, please refers to below drawing.
In any condition, if the actual Tc exceed maximum operating temperature at Tc- point 70Â°C will void all warranties.
Whole Length Distance between LEDs Length per unit Width Height
MF228X060A80- DXXXXXA10 5000 16.7 50 10 2
MF228X120A80- DXXXXXA10 5000 8.33 25 10 2
Product Length/ Reel Quantity/ carton Size of Carton Net Weight Gross Weight
M Reel L x W x H mm KG KG
MF228X060A80- DXXXXXA10 5 40 510 x 240 x 230 4.8 5.8
MF228X120A80- DXXXXXA10 5 40 510 x 240 x 230 4.8 5.8
>>>The LED strip light itself and all its components must not be mechanically stressed.
>>>Assembly must not damage or destroy conducting paths on the circuit board.
In order to drive LED flexible strip lights safely, it is absolutely necessary to operate them with an electronically stabilized power supply protecting against short circuits, overload and overheating.
To also ease the luminaire/ installation approval, electronic control gear, power supply and all electronic accessories for LED or LED modules should carry the CE mark and meet the latest European safety standard.
>>>Installation of LED flexible strip light ( with power supplies) needs to be made with regard to all applicable electrical safety standards. Only qualified personnel should be allowed to perform installations.
>>>Observe correct polarity!
Depending on the product incorrect polarity will lead to emission of red or no light. The flexible strip light can be destroyed !
>>>Parallel connection is highly recommended as safe electrical operation mode.
Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the flexible strip light.
>>>The maximum run length of MF228X060A80â€DXXXXXA10 & MF228X120A80â€DXXXXXA10 is 5m with power feed at one end.
>>>Pay attention to standard ESD precautions when installing the module.
>>>Please ensure that the power supply is adequate to operate the flexible strip light.
>>>The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. The ability to customize the length of the product by cutting at specifically marked points is a key feature of the product and hence the reason for no factory installed conformal coating. For these reasons, it is recommended that the user complete all products modifications first ( cutting wiring) and then apply a conformal coating in the final stage of installations.
>>>Damage by corrosion will not be honored as a materials defect claim. It is the uerâ€™s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
>>>For applications involving exposure to humidity and dust the product must be protected by a fixture or housing with a suitable protecting class. The product can be protected against condensation water by treatment with an appropriate circuit board grade conformal coating. The conformal coating should have the following features:
- Optical transparency
- UV- resistance
- thermal expansion matching the thermal expansion of the product 15- 30* 10^- 6 cm/ cm/ K
- low permeability of steam for all climatic conditions
- resistance against corrosive environment
>>>The minimum bending radius is 2 cm. The product has to be mounted on a metal heat sink !
>>>For outdoor applications, the product has to be mounted on a metal heat sink as well as housing with IP65 rated at least.
>>>MX offers a 3 year limited warranty for products stated in this datasheet from the date of shipment from MXâ€™s factory.
>>>All products are , at the time of shipment, warranted to be free from defects in material and workmanship under normal service and use, provide that installation or renewal is in accoardance with manufacturerâ€™s instruction.
>>>If any product fails within the warranty period, and then after MX has verfied the allegedly non- complying product( s) and found the said product( s) to be in fact defective within warranty, MX will at its option either furnish a replacement for or issue a credit for the purchasing price of product( s) , therefor which proves to be not in compliance with the aforesaid warranty.
>>>Free replacement( s) supplied under warranty does not extend the orignial warraty period cover.
>>>MX does not automaticlaly accept liability for associated or consequential loss of any kind whatsoever, but due consideration will be given in cases where product( s) is confirmed as defective after verfication.
>>>This warranty does not apply to any failures caused by misuse, improper storage, negligence, accident, maladjustment , repaire or accessories and devices from other manufacturers.
>>>This warranty does not cover defects or damanages during transportation.
>>>In any condition, if the actual Tc exceed the maximum allowed working temperature at Tc- point will avoid all warranties.
- Posted By: Shenzhen Mingxue Optoelectronics Co.,Ltd
- Phone: 8618676331374
- Address: 4th Building, Baodazhou Block, Shancheng Industry , Shenzhen, China
- Website: http://www.mingxue.cn
Published date: January 15, 2016 -
- Business Description: We MX are professional manufacturer of led STRIP & LINEAR lamp, located in 4 th Building, Baodazhou Block, Shancheng Industral Area, Shiyan Town, Bao'an Distrct, Shenzhen, Guangdong, China. With 11 years experience, 300 workers, more than 10000 m^2 workplace. 4 years' vendor of Wal-Mart, CE, RoHS, SAA and UL certificated, 2 or 3 or 5 years warranty.
Automatic Level Z32Manufacturing Plants - Tianjin Xing Ou Surveying Instrument Manufacture C - China - December 28, 2015 - contact company for price
The DS Z32 are designed for high precision of surveying applications, such as construction project, engineer of mine, road and bridge setting of large- scale equipment etc. Magnification are 20x, 24x, 28x, 32x Features include: * X type magnetic damp...
Semi Automatic Round Bottle Labeling Machine Lh1201Manufacturing Plants - Hong Kong Longhai Global Technology Corporation Li - China - December 25, 2015 - contact company for price
Features: 1. Powerful performance: labeling different sizes of round bottle/ containers 2. High precision and stability: PLC control system, stepping motor drives, U- type sensor detects 3. Colorful touch screen, English display, convenient operating...
Promotional Alunimum Led Solar Road StudManufacturing Plants - Shenzhen Starlight Brighten technology co., limite - China - December 9, 2015 - contact company for price
Solar road stud is a protruding signs. self- luminous, supply by solar panel. Generally used for paving road , used at night or in the rain and fog weather, and sketched the outline of the road, to improve road safety. solar panel : 0.2W mono solar p...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce