Fastvise 54 56 58 62 - Chinaprice: contact company for price
Merely insert the wires into the holes. The wires are gripped by spring-
loaded clamps which tighten more securely as the wires are pulled
harder, holding the wires at over 80% of the breaking strength of the
The FASTSPLICE is double sided for joining two ends of wire on in- line splices whereas the FASTVISE is half of a FASTSPLICE and is used for terminations at an end post. Each wire on a fence requires one FASTVISE.
To use the FASTVISE, drill a 3/ 8 inch hole through the end post and pull the wire through the hole. Then put the FASTVISE on the wire and tap it lightly into the hole. If final tensioning is to be done with the FASTVISE, it is recommended to pull the wire to the end post with a chain grab, then push the slack through the hole and FASTVISE. A special tightening tool ( TVT) is also available for use with the FASTVISE. It grabs the wire which has been threaded into the FASTVISE and a simple prying action pulls the wire through the FASTVISE to the desired tension.
A TWR wire release tool can be used to remove most 12.5 gauge FASTSPLICE from the fence wire. This allows the FASTSPLICE to be reused if care is taken during both initial installation and later removal.
- Phone: 86- 0574-88333778
- Address: NingChuan Road1888#, Ningbo, China
- Website: http://www.fastlink-agri.com
Published date: August 28, 2014 -
- Business Description: Fastlink is a manufactorying company,located in the beautiful seacoast
Since2002, Fastlink has been producing the different wire joiners and patented in China.
(FASTLINK,FASTVISE,FASTLOK,FAST SPLICE)for Vinyards and Orchards trellies .With over 10 years experience,we also manufacture a comprehensive line of accessories,earth anchors,post hardwares for whole trellis sys. That will be very convenient for our costomers to get all the goods from us for saving cost and time.
Our goal for running factory
1.Quality is the life of factory.
2.Pirce is the blood of factory.That's a reason that why costomers from different Countries come to us.
3.Service and modest attitude is the face of plant, and that will make our costomers more satisfied and to be friends in the final.
Wish to take this opportunity to express our appreciation to those domestic and foreign economic and business circles, manufacturers and enterprises for their consistent and true cooperative relations with our corporation. If you are interested in any of our products, please feel free to contact for more information.
Fastlink Tension Tool 01Metal Manufacturing - Ningbo Fastlink Mechanical Manufacturing Co., Ltd - China - August 28, 2014 - contact company for price
FASTLINK Tension Tool is designed for Fastlink Wire Joiners. FASTLINK Tension Tool is designed for Fastlink Wire Joiners. This FASTLINK Tension Tool is all metal construction, which is not difficult to deform and it is hard as well. In addition, the ...
Argon Arc Welding WireMetal Manufacturing - Shandong Zander Resourcing Company Limited - China - August 14, 2014 - contact company for price
1. Argon has good protective results and high quality weld can be obtained. 2. The arc has stable burning and shallow penetration, which is quite suitable for thin plates. 3. Easy to operate, All- position welding. One - side welding with back format...
Motovario Like Rv Series Aluminum Worm Gearbox Speed ReducerMetal Manufacturing - taizhou sihai machinery co.,ltd - China - August 12, 2014 - contact company for price
Characteristics: The worm gearbox features ( 1) Large output torque ( 2) Safe, reliable, economical and durable ( 3) Stable transmission, quiet operation ( 4) High heat- radiating efficiency, high carrying ability ( 5) Combination of two single- step...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce