Carbon Structural Steel Plate Treatment Commercial Railroad - Chinaprice: contact company for price
plates, and bars of structural quality for use in riveted, bolted, or
welded construction of bridges and buildings, and for general structural
purposes. Heat analysis shall be used to determine the required chemical
composition for carbon, manganese, phosphorus, sulfur, silicon, and
copper. Tensile strength, yield strength, and elongation shall be
evaluated using tension test and must conform to the required tensile
properties. This abstract is a brief summary of the referenced standard.
It is informational only and not an official part of the standard; the
full text of the standard itself must be referred to for its use and
application. ASTM does not give any warranty express or implied or make
any representation that the contents of this abstract are accurate,
complete or up to date.
1.1 This specification covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes.
1.2 Supplementary requirements are provided for use where additional testing or additional restrictions are required by the purchaser. Such requirements apply only when specified in the purchase order.
1.3 When the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service is to be utilized. See Appendix X3 of Specification A 6/A 6M for information on weldability.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other, without combining values in any way.
1.5 The text of this specification contains notes or footnotes, or both, that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.
1.6 For structural products produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of A 6/A 6M apply.
2. Referenced Documents
A6/A6M Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A27/A27M Specification for Steel Castings, Carbon, for General Application
A307 Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A325 Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
A501 Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A502 Specification for Rivets, Steel, Structural
A563 Specification for Carbon and Alloy Steel Nuts
A563M Specification for Carbon and Alloy Steel Nuts (Metric)
A668/A668M Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A1011/A1011M Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1018/A1018M Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
F568M Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Metric)
F1554 Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
bars; bolted construction; bridges; buildings; carbon; plates; riveted construction; shapes; steel; structural steel; welded construction; Bolted construction materials/applications-specifications; Bridge/structural materials-specifications; Building materials/applications-specifications; Carbon steel bars/shapes-specifications; Carbon steel plate-specifications; Riveted construction-specifications; Structural steel (SS) plate-specifications; Structural steel (SS) shapes-specifications; Welded steel bars/shapes-specifications; Welded steel plate/sheet/strip-specifications; Railroad steel materials; Steel bars/shapes/wires
If interested, pls free to contact me
Carbon Structural Steel Plate
Thank you in advance for your consideration
- Posted By: Henan BEBON International Co.,Ltd
- Phone: 008637186151827
- Address: agriculture road 2801 B#,International Enterprise, Zhengzhou, China
- Website: http://www.bebonchina.com/
Published date: September 7, 2012 -
- Business Description: Henan BEBON international co.,ltd , located in zhengzhou ,henan province of china, is specialized in exporting steel product. Based on the domestic rich product resources and professional research on international market, BEBON'service has already spread many countries in Europe , America, Southeast Asia, Middle East, South America, Africa, and so on.
We have three big warehouses Zhengzhou, which mainly store profile steel, the quantity of ex stock is about 4000tons,shanghai and Tianjin,which mainly store steel plates ,the quantity is about 6500tons. Besides, the product material quality in stocks is complete, the reserve is big, and delivery can be immediate.
We have built the long term strategy cooperation with several chinese steel mills,like Shou steel(in beijing and qinhuangdao) ,Bao steel (in shanghai),Wuyang steel (in henan),Han steel(in handan),so we can carry on the production completely defer to the customers' request
Our service is the "one stop" work style. We have our processing factory and the pre treatment factory, can make the customers enjoy cutting,welding,drilling holes,ball blasting, derusting, painting,galvanizing by the lowest cost price.
Good quality and fast delivery time is the base of our work, this is not enough. Our every sales are trying their best to solve every problem from both you and your end user.we are making every client feel our company is their home in china.
Mould SteelSteel - Sheeting - Shanghai Delex Mould Products Co.,Ltd - China - September 6, 2012 - contact company for price
Our company is the sole agent of KIND&CO. We also supply other special plastic mold steels from China and Europe. Mould Steel Thank you in advance for your consideration
Furnace Backup Wrok Media Roller Quench Machine Control SystermSteel - Sheeting - Tiangel Intelnational Co., Ltd - China - September 6, 2012 - contact company for price
Tiangel International Co., Ltd located in HongKong , china. Company was set up in 2007 and was working at industry business. Our company’s business include exporting the industry equipment and parts, designing and supply industry equipment, include i...
Ss26 42,00 Steel PlateSteel - Sheeting - beboninternational - China - August 13, 2012 - contact company for price
Steel Category:Non-alloy steel plate Steel standard:MNC810E Steel grade:MNC810E SS26, 42, 00 Dimension: Thickness 5-300mm, Width 1500-3500mm, Length 3000-12000mm Application: Structural Steels SS26, 42, 00 is used in many applications, combining good...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce