Supply Infusion Pump Jsb 1200 At Low Price - Chinaprice: contact company for price
* Compatible with IV sets of any Brand with high accuracy.
* Automatical calibration for IV sets of any Brand.
* Three working modes: Drop counting control, Rate control and time control mode.
* 8 Hours internal battery life in high capacity.
* Has a unique color LCD and an internal battery with a high capability.
Swith between ml/h and drops/min freely.
Three levels of alarm volume: high, medium and low.
Three levels of Occlusion pressure: high, medium and low.
KVO function When finish the total volume of an infusion,
the pump will alarm and enter KVO state.
Drop counting and adjusting the delivery rate automatically
Pump Type: Peristaltic finger
Applicable IV Sets:
Compatible with IV sets of any standard(including lucifugal IV sets)
≤25drop/min: ±2%, >25drop/min:±3% (With the drop counting control mode)
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
1.0ml/h～1200ml/h (1.0ml/h～99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step)
Delivery Time Range: 1min～1999min (1 min step)
Volume Limit Range: 0～9999ml (1 ml step)
Total Volume Range: 1～9999ml (1 ml step)
Rapid injection: 600ml/h
When the delivery rate≤10ml/h, KVO is 1 ml/h. Ot herwise KVO is 3ml/h.
Air-in-line, Infusion complete when limited volume has been set, Empty container, Occlusion, Door is open, waitting time Over, No drop been detected, Operational errors, Low battery, other device failures.
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃ Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual
Supply Infusion Pump Jsb 1200 At Low Price
Please see our contact information below
- Posted By: Jian Yuan Medical Technology Co.,LTD.
- Phone: 008673184166773
- Address: No.199,lulong road,hi-tech industrial zone, changsha, China
- Website: http://www.jympump.com
Published date: September 6, 2012 -
- Business Description: JianYuan Medical Technology Co., Ltd. (JYM),is one of the leading manufactory and exporter of medical infusion pump syringe pump and feeding pump located in China.
Recently, we have already passed CE, ISO13485 and ISO9001,and obtained registration in Russian, Colombia and Poland,Thailand, etc. Our products are widely used for critical care in ICU,Newborn ICU,Nuring or Operation Room,as well as Orthopaedic use.
Medical Equipment AccessoriesMedical - Equipment - SHENZHEN CHINMED ELECTRICAL CO.,LTD - China - September 6, 2012 - contact company for price
Hi Sir, We supply the replacement of patient monitor accessories like Spo2, ECG/EKG, BP, Temp，and so on with good quality and competitive price. Hope to be a partner of your company. E-catalog will be provided if needed. Email me or just call ...
Iron Oxide Particle Powder BrickMedical - Equipment - qinhuangdao lead chemical ltd.co - China - September 6, 2012 - contact company for price
Iron Red 110 Type Appearance: yellow red powder, particle size ≤0.01μm, heat resistance, light resistance and strong dyeing power, used in coloring of colored cement roof tile and producing colored cement. The dyeing power is up to 105% an...
Medical Cable Accessories EquipmentMedical - Equipment - SHENZHEN CHINMED ELECTRICAL CO.,LTD - China - September 6, 2012 - contact company for price
We supply the replacement of patient monitor accessories like Spo2, ECG/EKG, BP, Temp，and so on with good quality and competitive price. Hope to be a partner of your company. E-catalog will be provided if needed. Email me or just call me direc...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce