Water Chiller Air With Many Model - Chinaprice: contact company for price
auxiliary machine , such like the water or air chiller, hopper dryer, auto
loader, Robot and so on elated auxiliary machine for you. you can enquiry
about the mould , the machine , the auxiliary machine from Sino Mould .
•Compressor is used "COPELAND" brand which made in the USA.The inside safety protection can guarantee the long lasting of the chiller well.The pump is used made in Taiwan and all parts of cooling system are imported from the USA.Mexico.Denmark and Japan.
•Equipped with shellpipe condenser and stainless steel cased evaporator, which are quite easy to be cleaned and maintained.Equipped with automatic water supply device in the water-tank.Air cooled cased chiller with board type evaporator is suitable for the district of lack of water resource and district of poor water quality.
•Larger than model SN-20 are assembled 2 sets or 4 sets of compressors, so they are able to used as separate or together to reduce the resource waste.
•Complete with safety protection and error indication system, including compressor over load protection, pump over load protection, high pressure and low pressure protection and phase failure protection.
•Equipped with figure intellectualized temperature controls, which can accurately measure and control water temperatuer within the range of 5C~35C.
- Posted By: sino mould Co.,Ltd
- Phone: 15215806623
- Address: XinjiangmTaizhou,china, Taizhou, China
- Website: http://www.sinomould.com
Published date: January 25, 2013 -
- Business Description: CHINA MOULD SINOMOULD is a famous China Mould manufacturer, efforts for realizing the hugest China Mould manufacturing Group and China Mould technologies innovator. SINOMOULD is meaning China Mould or Chinese Mould. SINO MOULD CO., Ltd and SINOMOULD trade mark have been global protected.
Sino Mould is a private owned China mould company which was established on 1999 year, the founder was included 3 persons who are Mr. Jun Lee, Miss Susan Lee and Miss Sofei Lim. From the beginning of company, most of the China Mould factories were working for domestic market, seldom of the China Mould company do oversea service, while Sino Mould started to aim on international market. As because mould is a kind of complex tool, the investor buy the mould for mass production, for this reason, there should be none stop when a large quantities of plastic molded components need to be delivered or need to be processed onto a certain assembling production line, for these reason, based on the mould investors demands, we started to investigate and study European quality standard for mould manufacturing.
In 2001 year, Sino Mould started the cooperation of OEM for MTS Belgium (Mold Technology Service Belgium). This OEM cooperation has lasted for 3 years, and during this 3 years, Sino Mould got to know what s the European mould quality standard and established 《SINO MOULD DESIGN STANDART》and《SINO MOULD MANUFACTURING STARNDARD》.
With China Mould technologies and China Mould market s further matured, Sino Mould developed with a very high speed. From 2003 to 2010, every year s turnover was more than doubled.
China Mould industries are high speed developing, sales annually development rate is around 15%. There are more than 2000 registered China Mould companies, and annually more than 3.6% of new China Mould companies are establishing. Currently, China Mould industries are facing heavy competitiveness. In order to keep strong competitiveness, Sino Mould purchased 70000 SQM of new land to enlarge the production capacity and improve the managing system. In 2010 year, Sino Mould 30000SQM new factory started to use, and purchased more than 6M USD new tooling and measuring equipments from German, Italy and Japan. All these investment is not increasing the cost of the mould, on the contrary, these investment increased the quality, reduced human resources, shortened the mould manufacturing lead time all these increased the strong competitiveness of Sino Mould by the lower price, much higher quality and shorter delivery time.
China Mould is now becoming more and more popular in the world, due to the quality of China Mould was improved, China Mould People s philosophy, China Mould manufacturing technologies, China Mould tooling processing technologies are improved. China Mould costs only 20 to 70% of European, American or Japanese.
Come to order China Mould earlier, it will evident that you are wiser. Check please, your competitors are ordering China Mould to save molding cost while you are investing 30 to 80% more than them.
China Mould manufacturer such like Sino Mould is a high performance mould supplier. Come to order long lasting, high performance qualified China Mould! Sino Mould offers you excellent service before your order, during your order and after sales service. Sino Mould offers best China Mould and Molding solutions!
China Mould is current the name meaning of qualified mould; China Mould is the name of responsibilities; China Mould is meaning of top philosophy on mould design and manufacturing.
China Mould has spent her growth stage already.
Jt 250 Vertical Injection Molding Machine For Usb Connector And EarphonePlastic Working Machinery - DONGGUAN JINTONG PLASTIC MACHINERY CO., LTD - China - April 14, 2016 - contact company for price
vertical injection molding machine JT- 250 Feature : Clamping Force : 25T Injection Weight : 32g- 85g Vertical clamping, vertical injection, small volume, precise molding, available to small and medium hardware insert molding. Vertical clamping, even...
Pprt Pipe Extrusion LinePlastic Working Machinery - Qingdao Leader Machinery - China - April 5, 2016 - contact company for price
Using a special screw design and enhanced plasticization effect to ensure high- quality high- speed extrusion, high shear stress and low temperature to ensure that raw materials of high- performance plastics extrusion, the measurement on the feeder w...
Multi Color Material Plastic Injection Molding Machine Jtt 550 2v3rPlastic Working Machinery - DONGGUAN JINTONG PLASTIC MACHINERY CO., LTD - China - March 17, 2016 - contact company for price
â–ª One clamping mold with two injection system( horizontal and vertical system) , which make two- color or two- material products â–ª Two injection systems can work individually, which do injection one by one or at same time â–ª With rotary table, e...
Safe Trade Tips
- Ask for business references and check them
- Verify their business via their local Chamber of Commerce