40 visiting now: 19 China China flag 11 USA USA flag 7 France France flag 1 UK UK flag 1 India India flag 1 Netherlands Netherlands flag

Manual Molding Silicone Rubber Resistance Flowable Szrl - China

price: contact company for price

Manual Molding Silicone Rubber

Brief description of manual molding silicone rubber:

Manual mold silicone is a flowable liquid, and the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.

Note: The time for vacuum-pumping should be less than 3-5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.

Applications of manual molding silicone rubber:

Manual molding silicone rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.

Brief features:

1. Good elasticity 2. Non deformation 3. Heat resistance 4. Low shrinkage.

Model code:

HY-528# is applicable to make molds of smaller products and the reduplication will be 2-3 times.

HY-540# , compared to other two types, for its moderate hardness and better quality & performance, its reduplication will be 20-30 times.

HY-570# is applicable to large size products duplications and electronic equipment antivibration.

Operation Instruction:

1)Correct mixing ratio

Component A is silicone rubber, and component B is curing agent or vulcanizing agent, usually the mixing ratio will be 2-3%. Such as to 100G silicone rubber should be added 2G catalyst and then mix them totally(Note: the weight of the silicone and catalyst should be weighted correctly. According to local weather, the mixing ratio can be 100 to 2 under room-temperature 25 0C; if the local weather is about 10 0C, then the maximum mixing ratio should be 5%; When local temperature is -5 0C, no reaction will happen between the silicone and hardener; once the temperature of local weather is 38-45 0C, the mixing ratio of silicone and curing agent should be 1 %).

2)Preparation of the Original molds

Firstly, you should deal carefully with the Original mold or the products you want to be molded. If no polishing of the Original mold or the products you want to be molded, the surface of it is not so smooth or perfect, then the products made out of silicone molds will be not up to standard.

3) Vacuum-Pumping Process

mix the silicone and catalyst with a standard mixing ratio and then do the process of Vacuum-Pumping. Bubbles will come out during the mixing of the silicone and hardener, if without Vacuum-Pumping, the bubbles cannot be released from the mixture, as a result, there will be many bubbles in the finished silicone mold. Then the mold has a worse tensile strength which will affect the reproduction times. Such an unsmoothed silicone mold will affect the quality of the production directly.

Frequently asked questions of manual molding silicone rubber

1. How to deal with the bubbles during the mixing process?

It depends on your practical situation. Firstly you can deal the mixture with a vacuum machine if you have one; If no such machine, you can reduce the mixing ratio of the hardener from 4% to 1%-2%.Then in the prior period of the reaction of the mixture will be slower, then the air in the mixture will exhaust by itself for a longer curing time to release the bubble.

Further information, please feel free to contact Firleanna:

MSN: HY-Firleanna(at)hotmail(dot)com


T: 86-755-85224692


F: 86-755-89948030

Email: HY-Firleanna(at)hotmail(dot)com

Website: www(dot)szrl(dot)net

Manual Molding Silicone Rubber

Please inquiry for your need now

Company Contact:

  • Phone: 8618938867520

  • Address: Shenzhen Hong Ye Jie Technology Co., Ltd., shenzhen, China

  • Email: Email

Published date: September 7, 2012 -

  • Business Description: Shenzhen Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.

    Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV 2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.

    To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on site follow up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.

    Customers and distributors from around the world are welcomed to negotiate with us for business cooperation. Let's join hands and strive for mutu al prosperity.

Related listings

  • White Carbon Component Matt Density
    White Carbon Component Matt Density
    Rubber - Xiamen Continent Chemical Co., Ltd - China - September 7, 2012 - contact company for price

    Tyre white carbon, precipitated silica for rubber or energy-saving tires Basic instruction: Precipitated white carbon is precipitated silica with features of high dispersivity, hight reinforcement. Our white carbon has great performance as internatio...

  • Rubber Tyre Wheel
    Rubber Tyre Wheel
    Rubber - Jinnoc Expo Co., Ltd - China - September 7, 2012 - contact company for price

    March 29-31, 2012 2012 the 9th China International Tire (Qingdao) Fair 2012 The 9th China International Rubber Technology ( Qingdao ) Fair Web: www.rubbere.com Rubber Tyre Wheel Please see our contact information below

  • Raw Rubber Materials
    Raw Rubber Materials
    Rubber - VIET PHU THINH RUBBER JOINT STOCK COMPANY - Vietnam - September 7, 2012 - contact company for price

    We can supply all grades of natural raw rubber materials such as: - RSS1, RSS3 - SVRCV50, SVRCV60 - SVR3L, SVR5 - SVR10, SVR20 - latex ha - la 60% drc Raw Rubber Materials Please inquiry for your need now

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"