30 visiting now: 15 France France flag 7 USA USA flag 4 China China flag 2 Netherlands Netherlands flag 1 UK UK flag 1 Vietnam Vietnam flag

Fmvss 302 Flammability Test To Motor Vehicle Interior Materials - China

price: contact company for price

FMVSS 302 Flammability test to Motor Vehicle Interior materials

Firetc fire test center will provide FMVSS 302 Flammability test to Motor Vehicle Interior materials.

FMVSS 302: Federal Motor Vehicle Safety Standard 302

FMVSS302 Flammability of Interior materials

FMVSS 302 Scope:

This standard specifies burn resistance requirements for materials used in the occupant compartments of motor vehicles

FMVSS 302 Purpose. :

The purpose of this standard is to reduce the deaths and injuries to motor vehicle occupants caused by vehicle fires, especially those originating in the interior of the vehicle from sources such as matches or cigarettes.

FMVSS 302 Application:

This standard applies to passenger cars, multipurpose passenger vehicles, trucks, and buses.

FMVSS 302 Test Procedure:

a. Mount the specimen so that both sides and one end are held by the U- shaped frame, and one end is even with the open end of the frame. Where the maximum available width of a specimen is not more than 51 mm, so that the sides of the specimen cannot be held in the U- shaped frame, place the specimen in position on wire supports as described in S5.1.3, with one end held by the closed end of the U- shaped frame.

b. Place the mounted specimen in a horizontal position, in the center of the cabinet.

c. With the flame adjusted according to S5.1.4, position the bunsen burner and specimen so that the center of the burner tip is 19 mm below the center of the bottom edge of the open end of the specimen.

d. Expose the specimen to the flame for 15 seconds.

e. Begin timing ( without reference to the period of application of the burner flame) when the flame from the burning specimen reaches a point 38 mm from the open end of the specimen.

f. Measure the time that it takes the flame to progress to a point 38 mm from the clamped end of the specimen. If the flame does not reach the specified end point, time its progress to the point where flaming stops.

g. Calculate the burn rate from the formula: B = 60 × ( D/ T)

Where:

B = Burn rate in millimeters per minute

D = Length the flame travels in millimeters, and

T = Time in seconds for the flame to travel D millimeters.

FMVSS 302 Flammability of Interior materials - Relative Standard

GB 8410 Flammability of automotive interior materials

SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method

TL1010: Flammability

ISO 3795: Road vehicles, and tractors and machinery for agriculture and forestry - - Determination of burning behaviour of interior materials

DIN 75200: Determination of burning behaviour of interior materials in motor vehicles

95/ 28/ EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehicles”, and is intended to ensure that they meet fire safety standards

NF P 92- 505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.

U. T. A. C 18- 502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles

BMW N 60121.0: BMW standard

DBL 5307: Benz Standard

GM L- T06- 302G- 79: GE Standard

Mitsubishi ES- X60410: Oxygen Index

VW TL 1010: burning behaviour

Volvo STD 5031: burning behaviour


Company Contact:


  • Phone: 8605925056213

  • Address: Powercenter, No.301 Jiahe Road,, Xiamen, China

  • Email: Email


Published date: August 1, 2014 -

  • Business Description: Firetc fire test center work with Ecosafene(www.ecosafene.com) and Crepim(www.crepim.org) and will conduct kinds of fire test for Building material, railway components, marine equipment, aircraft material, motor vehicle and furniture, the test method involve: GB20286, GB8624, BS476 6, EN45545 2,NFF16 101, DIN5510 2, NFPA130,BS6853, NFP92 501, DIN4102, EN13501 1,FAR25.853, UL94, ASTME162, ASTME662, BS476 22, EN1363 1, AS1530

    FIRETC is a B2B electronic Business website for Fire Resource. And it is dedicated to providing a platform for miscellaneous communication and collaboration among the manufacturers, traders, and purchasing agents in industry of flame retarding, fire proof, fire resistance.

    FIRETC is an information center for worldwide fire regulation and standard and flame retardant knowledge, which aim for increasing the attention for fire and avoiding fire.

    FIRETC will provide more special platform and create more business chance to manufactures and traders who work for fire precaution, fire protection and fire safety

Related listings



  • Flammability Classification Testing Iec 60695 11 10
    Flammability Classification Testing Iec 60695 11 10
    Services - Testing / Monitoring - Firetc Fire Test Center - China - August 1, 2014 - contact company for price

    Flammability Classification testing- IEC 60695- 11- 10 Fire test center will provide IEC 60695- 11- 10( UL 94) Fire hazard testing to Plastics Material. IEC 60695- 11- 10( UL 94) Fire Retardant Test to Plastics Material - Principle IEC 60695- 11- 10 ...

  • European En Iso 4589 2 Oxygen Index Test To Plastics Material
    European En Iso 4589 2 Oxygen Index Test To Plastics Material
    Services - Testing / Monitoring - Firetc Fire Test Center - China - August 1, 2014 - contact company for price

    European EN ISO 4589- 2: Oxygen Index Test to Plastics Material Firetc fire test center will provide ISO 4589- 2: Oxygen Index Test to Plastics Material. EN ISO 4589- 2: Plastics – Determination of burning behaviour by oxygen index – Part 2: Ambient-...

  • Gb 8410 Chinese Standard Flammability Test To Motor Vehicle
    Gb 8410 Chinese Standard Flammability Test To Motor Vehicle
    Services - Testing / Monitoring - Firetc Fire Test Center - China - August 1, 2014 - contact company for price

    GB 8410( Chinese Standard) Flammability Test to Motor Vehicle Firetc fire test center will provide GB8 410 Flammability of automotive interior materials. GB8410 Scope This Standard specifies the technical requirements and test methods for the horizon...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"