trade leads
View Offers to Buy: Equipment - Repair/Maintenance
 
38--Runway Sweeper (OB624245) (2004-02-02)

This is synopsis for commercial item: Runway Sweeper: Qty 1 each: The sweeper
shall be an regenerative air type with broom assist pick-up head and leaf
pressure bleeder, capable of sweeping streets, curbs and gutters, runways,
taxiways, ramps and parking areas. The sweeper shall be mounted on a diesel
powered, conventional cab/chassis. GENERAL SWEEPING WIDTH: Pick-up heady only:
87 inches (2210mmm), With 1 gutter broom: 110 inches (2795mm), With 2 gutter
brooms: up to 142 inches (3606mmm). CAB/CHASSIS-CONVENTIONAL: GVW 29,000lbs
(13,000kg) min, Frame 50,000-psi min, Engine Diesel, 175 HP min, Transmission
Automatic, Alternator 100-amp min, Batteries (2) 12V; 1100 CCA, maintenance
Free, Wheelbase 152 inches min, Fuel Tank 50 gal, Shared with Sweeper Engine,
Tires (2-front, 4-rear), Tubeless 11Rx22.5 min Steering Integral Power
assisted, with Dual 18 inch steering wheels Instrument s & Lights Full package
as required, manufactures standard. Air Conditioned Cab Manufactures standard
Front mounted Magnet Manufactures standard. CONTROLS: Inside cab (lighted):
Pick-up head, gutter brooms, ignition and tachometer (aux engine), voltmeter,
low water warning system (dust control), all safety light, hour meter,
pressure bleeder. Outside cab: Dump SWEEPER AUXILIARY ENGINE, DIESEL:
Displacement 76 cubic inches min, Horsepower 80@2,500 RPM (60kW) min, Oil
Filter Spin on, full flow BLOWER, RUBBER LINED: Aluminum alloy high volume
open face turbine Bearings: (2) sealed lifetime lube, anti-friction, Housing:
Abrasion resistant, with replaceable liner, Driver: Heavy duty power band DUST
SEPARATOR: Type: Cyclonic, multiphase, centrifugal separation Location: Axial
to blower within hopper super structure, Particulate removal: Through skimmer
slot into hopper Inspection: H inged door, opened from hopper exterior
Housing: Abrasion resistant, with replaceable wear resistant liner. HOPPER:
Capacity (volumetric): 7.3 cubic yards min, Capacity (useable): 6 cubic yards,
Construction: Welded steel plate with integral stiffeners Dumping method:
Hydraulic with raker bar PICK-UP HEAD: Function: Air blast and suction chamber
Width: 87 inches, Suspension: 4 spring 2 drag links, Skids: Carbide, long
life, Suction and Pressure hose: 14 inches diameter min, Pressure bleeder:
Integral for leaf/light material pickup, Broom Assist Picl: Up Head (BAH)
manufactures standard. GUTTER BROOMS, DUAL WITH REMOTE TILT: Drive: Constant
speed on reversible hydraulic motor, Adjustment: Adjustable for down pressure,
pattern and wear Down pressure: Automatically adjusts to requirements,
Flexibility: All directions, integral anti-damage "swing away" relief valve,
Safety: Floodli ghts and parabolic mirrors. DUST CONTROL SYSTEM: System of
water spray nozzles for airborne dust suppression, Water pump: Electric
diaphragm Reservoir: (Polyethylene) 220 gal min, Filter: 80 meshes in per
line, Low water shut-off/Safety shut-off, low water warning light in cab
coupled with liquid level sensor, Spray nozzles: Around pick-up head (4),
Gutter brooms (each) 2, Hopper (inside) (1). HYDRAULIC SYSTEM: Operates gutter
brooms, dump and pick-head, Pump drive: Gear driven from auxiliary engine,
Pump Capacity: 8GPM min, with 80 mesh suction strainer, Reservoir: 25 gal min,
Filter: 10 micron in per line. SPECIAL AND SAFETYREQURIEMENTS: Amber rear
mounted flashing warning lights, Amber strobe light with limb guard Auxiliary
engine shutdown system, Back-up alarm, Severe weather wiring, Suction inlet
liner, Water fill hose and rack, Water level indicator, Rear 6 inch hand suc
tion hose, Abrasion protection package, Overseas packaging, Hopper drain
system, Tropical Rust proofing, Over pack Manuals, Marine Corps Marking.
Desired delivery is 90 days after award date of contract The Government
requires delivery to be made within 120 days after award date of contract.
Delivery: FOB Destination: Garrison Mobile Equipment, MCB Camp S. D. Butler,
Okinawa, Japan FPO AP 96373-5001. This procurement not a small business set-
aside; any responsible source may submit an offer. Solicitation will be
available on and after 05 Feb 2004. Requests for Quotation (RFQ) will be
issued to all respondents to this synopsis. Solicitation requests and RFQ
response offers can be faxed to 011816117450969, emailed to
[Please use the link below], or mailed the Regional Contracting Office, PSC
557 BOX 2000, FPO AP 96379-2000. Offers must be received no later than 4:00
PM, JST, 23 Feb 2004. Questions may be addressed to Yuriko Kuwae by email at:
[Please use the link below]. All correspondences must include the
solicitation number (M67400-04-T-0267); you full name, your company name, and
telephone and fax numbers. All offers received shall be considered.


Company Reports

Get the Dun & Bradstreet Report for Department of the Navy, United States Marine Corps
Company Information
 
Company Name:   Department of the Navy, United States Marine Corps
Address:Login to view contact details
City:Login to view contact details
State/Province:Login to view contact details
Country:Login to view contact details
Zip/Postal Code:Login to view contact details
Phone:Login to view contact details
Fax:Login to view contact details
Contact Person: Login to view contact details
Email:Click here to send this company an email

Didn't find what you were looking for? Post a lead!

Click here to forward this trade lead to a friend!


Worldbid.com Affiliates