China Stainless Steel Kitchen Cabinets Suppliers Introduce What Is A Single Trough Sink - China

China Stainless Steel Kitchen Cabinets Suppliers introduce whether the sink is single or double: 1 - Double groove and single groove

Of course, the small-sized stainless steel kitchen sink should choose a single sink.

If it is a kitchen with a large space, the double sink is also a better choice, mainly depending on the degree of personal preference.

In fact, both have their own advantages.

It can't be said that a single sink is good or a double sink is good.

2 - The basin on the stage

Basin under the table: The opening specification of the table top is the same as that of the basin liner of the kitchen sink.

The kitchen sink is pasted from the bottom of the table top.

The stone opening fits perfectly with the basin liner, and then it is fixed on its marble with hook glue.

The advantage is that the water and dirt on the table can be easily swept into the sink, which is very convenient to clean.

Upper basin: Different from the lower basin, the opening size is the same as that of the kitchen sink basin, but when it is put in from the countertop, the edge of the basin liner will be exposed on the top of the cabinet countertop.

It is convenient to install, but it is very inconvenient to clean up in the future, and it is easy to grow mildew and blacken the gap after a long time.

3 - Stainless steel faucet

No matter whether it is a single tank or a double tank, a faucet will be used in any kitchen stainless steel sink.

Installing a pull-out stainless steel faucet can clean up all the corners of the sink, which is very convenient to use.

In fact, the stainless steel sink in the kitchen has been used for a long time, and "floating rust" may appear on the surface.

In addition, it is also a high incidence period of floating rust after decoration, so in the daily use process, try to keep the sink clean, especially don't let some metal substances, organic substances and acid and alkali chemicals remain in the tray for a long time.

If these substances are left on the tray carelessly, causing some floating rust on the tray body, you can use the cleaning paste specially configured by the stainless steel sink manufacturer, and wipe it gently along the lines of the sink with a non-protective cloth.

After the floating rust disappears, rinse it with clear water.

Through the above introduction, Handmade Sink Manufacturers hopes that you can simply refer to the content of this article in future use.

Company Contact:

• Posted By: ningboafa

• Phone: 12536985457

• Address: Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China, Yuyao , Leanhu Village, Mazhu Town, China

• Email:

• Website: https://www.afastainlesskb.com

• Business Description: Afa kitchen and bath - world's leading manufacturer of high quality stainless steel kitchen sink, stainless steel kitchen cabinets, stainless steel kitchen faucet and stainless steel bathroom faucet products.
  
  Ningbo AFA Kitchen and Bath Co., Ltd. was established in 1993 and active in Europe and United States, Australia and other first-line kitchen and bath market for 20 years.
  
  Due to living in the international fashion hinterland and kitchen frontier, long history and advanced design concept created simple and elegant product style and superb quality of AFA.
  
  Quality and innovation are the brand spirit of AFA.
  
  AFA always believes that there is no future without quality and innovation.
  
  AFA insists: first consider the quality and then consider the cost.
  
  Take the quality first, then output.
  
  Over the years, AFA constantly guided innovative revolution of kitchen and bath products depend on excellent quality, innovation and market sensitivity.
  
  At present, our production plant covers 26,000 square meters with the market most advanced production technology and production equipment.
  
  Our company pays attention to the high quality of the products and the customers' demands which are beneficial to further development of company.
  
  The new plant has about 200 people and most advanced equipment for making kitchen sinks.
  
  The new plant will have 15,000 square meters, and our company workshop will reach an area of 41,000 square meters after finishing the new plant.