Flame Spread Tester Iso 5658 - China

Flame Spread Tester ISO 5658 The flame spread tester ISO 5658 radiates heat through a gas radiant panel and uses an imported heat flow meter to calibrate the radiant heat and ignite the sample through a mixed gas burner to test the combustion of a material under a certain radiant heat; it is mainly used for the determination of building products.

The transverse flame spread performance, the flame spread performance/flame spread speed can evaluate the fire retardant performance of the material.

Flame Spread Tester ISO 5658 Test Method

Expose the sample to an area of ​​well-defined radiant flux and measure the ignition time, flame spread and final extinction time.

The test sample is placed in a vertical position, adjacent to the radiant panel, and exposed to an area of ​​clearly demarcated radiant flux.

The pilot flame is close to the test sample, but does not touch the test sample, and the heated end of the sample is ignited by the evaporating gas on the surface.

After ignition, the development of the flame front was recorded, and the time it took for the flame front to burn horizontally on the surface of the sample to each calibrated distance was recorded.

Further test materials include ignition heat, continuous combustion heat, critical flow, average heat of continuous combustion, total heat release and other related parameters.

Flame spread tester ISO 5658 technical parameters

Main components: It consists of burner frame and sample support frame.

Box material: made of stainless steel, beautiful and corrosion-resistant, easy to clean; Radiant plate temperature controller: prevent the flame from turning to the rear side of the heat sink, check the internal temperature of the heat sink, and test the flame flow controller Easily test the methane content when the gas is at critical heat flow; Gas supply: Equipped with pressure reducing valve, zero pressure valve, tempering valve, solenoid valve and mixer to deliver the mixed air and gas to the radiant panel.

Provide multi-hole calibration plate and sliding heat flow meter moving track, which can detect whether the heat radiation flux meets the standard requirements; Sample chimney: 1, equipped with gas and chimney metal compensation thermocouple.

Burner: 200±10mm long double-hole ceramic tube; Ignition source: radiant panel and propane torch, precise control of flame height; Power supply: AC 220V, 50/60Hz, 30A; Dimensions: 1710W×1100D×1985Hmm; Console size: 600W×750D×1, 600Hmm; Instrument weight: 200kg; Combustion gas source: industrial methane (user-supplied); PS: (WLJCDM809)

Qinsun Instruments Co., Ltd

Company Contact:

• Posted By: Qinsun Instruments Co., Ltd

• Phone: +862167800179

• Address: No.258 Banting Road, Songjiang District Gu Dai Road, Shanghai, SHANGHIA , Shanghai , China

• Email:

• Website: https://www.qinsun-lab.com

• Business Description: Qinsun Instruments Co., Ltd was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry.
  
  Qinsun specialize in the research and development of high quality lab instrument for textile testing industry.
  
  Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
  
  Our Products:
  
  - multi finger scratch tester
  
  - electronic crockmeter rubbing fastness tester
  
  - double cylinder launder ometer
  
  - color fastness tester of textiles to perspiration
  
  - scorch sublimation tester for color fastness to heat