Straight Line Wire Drawing Machine - China

Compared with other wire drawing machine, straight line wire

drawing machine provides better drawability, lower

frictional contact and less operator interference.

In recent

years, it is widely applied in Europe and the United States

and other developed countries for its good performances.

Advantages:

Low work hardening rate

During the manufacturing process, this wire drawing machine

adopt no bending, no torsion technologies and strong cooling

technologies, all of which make the wire has a low work

hardening rate and excellent toughness and ductility.

High efficiency and low consumption

The straight wire drawing machine is famous for its high

efficiency and low cost.

When it is applied, it will bring

huge cost-reduction as a result of its low power

consumption, high percent of pass and yield rate.

Properties:

Equipment capacity: Maxi Line Diameter 6.5mm, tensile

strength �� 1350MPa; mini outlet diameter 1.2mm.

Maxi drawing speed: 720m/min.

Braking capacity: under extreme speed, normal braking ��

50s, rapid braking �� 15s an emergency braking �� 3s.

Coil methods: spool payoff machine or trunk wire rewinding

machine.

Features

Mechanical characteristics

Main transmission adopts high-precision hard-toothed gear

box, of which unique manufacturing process insures no oil

leak at least in 3 years.

Surfacing (build-up welding) with the drawing drum leaves no

groove in 3 years.

Main transmission parts should pass the dynamic balance

test.

Functions:

The equipment is equipped with a number of functions,

including man-machine interaction, over-temperature

protection for motor, water pressure abnormalities, full

foot alarm and fault display, etc.

Application:

Straight line wire drawing machine is available for drawing

welding wires (flux cored wire, submerged-arc welding wire,

pas-shielded welding wire, etc), steel wires (low, medium

and high carbon steel wire), ss wire, spring wire,

prestressed steel wire, hose wire, tyre wire, steel cord and

electric wires (copper wire, aluminum wire) and allow steel

wire and other metal wires.

Parameters:

Spec Draft Max inlet diameter Min inlet diameter

capacity of electric motor Max speed Noise level

350 6-10 �� 3.5mm �� 0.6mm 7.5-11KW

20M/s 80-82dBA

400 6-10 �� 4.2mm �� 0.75mm 11-15KW

450 6-11 �� 4.8mm �� 1.0mm 15-22KW

18M/s 80-82dBA

500 6-12 �� 5.0mm �� 1.2mm 22-37KW

560 4-13 �� 6.5mm �� 1.4mm 22-45KW

18M/s 80-83dBA

600 4-13 �� 7.0mm �� 1.6mm 22-55KW

16M/s 80-83dBA

700 4-9 �� 8.0mm �� 2.2mm 45-75KW

12M/s 80-83dBA

900 6-10 �� 14mm �� 4.0mm 75-110KW

10M/s 80-83dBA

1200 1-9 �� 16mm �� 5.0mm 90-110KW

8M/s 80-83dBA

Company Contact:

• Posted By: Anping Junchi wire drawing machinery Co., Ltd.

• Phone: 8645692225

• Address: NO.106 Anshun street, Anping, Hebei, China. 053600, hengshui , China

• Email:

• Website: http://www.wiredrawingmachine.org

• Business Description: Anping Junchi wire drawing machinery Co., Ltd., a professional wire
  
  drawing machine manufacturer in China, has been engaged in fabricating
  
  wire drawing machines and other auxiliaries for 15 years.
  
  Our company
  
  has accumulated rich experience of developing, designing and
  
  manufacturing qualified products with easy operation and safety.
  
  Wire
  
  drawing machines can be classified into two kinds by different
  
  lubrication conditions: dry drawing and wet drawing.
  
  Generally, straight
  
  line wire drawing machine is a kind of dry drawing machine, for its
  
  wire, coil and other related parts are not submersed in lubrication
  
  fluid.
  
  This drawing machine has better productivity due to higher
  
  drawing speeds with twist free operation.
  
  As a result of good cooling
  
  condition, low torsion, less wire deviation, the finish wire has a
  
  better quality.
  
  In contrast to dry drawing, wet wire drawing is notable for its wire, coil are soaked in lubrication liquid.
  
  This makes sure good lubrication condition and reduces friction force between the wire and equipment.
  
  It is ideal for drawing fine wires, ferrous or non ferrous.
  
  In addition, our company still produces related auxiliary, such as pointing machine, straightening and cutting machine, wire butt welding machine, wire payoff machine, vertical take up machine.
  
  There are essential elements for a wire drawing industry and will improve the productivity.
  
  Anping Junchi wire drawing machinery Co., Ltd. Always has been doing endeavor to manufacture first class equipment to meet with various requirements of our customers'.