Foxboro Ad916cc Communication Processor - China

FOXBORO AD916CC Communication Processor Product Overview The AD916CC, a Foxboro communications processor, is designed for industrial automation and control systems.

Its modular design allows it to be easily integrated into existing automation systems or used in combination with other Foxboro controllers and modules.

The processor has been widely used in the industrial automation field for its powerful communication capability, stability and reliability.

Key Features High-speed communication: AD916CC supports a variety of communication protocols and interfaces, such as Ethernet, serial port, etc., which enables high-speed and stable data transmission.

This ensures real-time communication with the host computer, HMI or other devices and improves the response speed and overall performance of the system.

Modular design: Foxboro's products usually adopt modular design, and AD916CC is no exception.

This design allows users to flexibly configure the system according to actual needs and facilitates system expansion and maintenance.

Redundancy and Fault Tolerance: To improve system reliability and availability, the AD916CC may support redundant configurations or have some form of fault tolerance mechanism.

This ensures that in the event of a system failure, the system can be quickly switched over to a backup device or module to keep the system up and running.

Ease of Use and Maintainability: The AD916CC provides a user-friendly interface and a wealth of diagnostic tools to help users quickly configure, commission and maintain the system.

This reduces system maintenance cost and time and improves overall system availability.

Technical Specifications Processor performance: AD916CC may adopt high-performance processor and memory to meet the needs of real-time control and processing complex control algorithms.

Communication interface: Support Ethernet, serial port and other communication interfaces to facilitate connection and data exchange with different devices.

Working environment: Suitable for a variety of harsh industrial environments, such as high temperature, high humidity, vibration and so on.

Power requirements: usually support standard industrial power supply, such as 220V, etc.

(specific power requirements may vary depending on the model or application).

Application Areas AD916CC communication processor is widely used in petroleum, chemical, electric power, pharmaceutical and other industrial automation fields.

In these fields, it enables efficient communication and data exchange between devices, and improves the degree of automation and overall efficiency of the production process.

Product Advantages High performance: adopts advanced processor technology and high-speed communication interface to achieve efficient data processing and transmission.

Stability: Strictly tested and verified to ensure stable operation in various environments.

Reliability: Adopting high-quality materials and manufacturing process to improve the reliability and service life of the product.

Flexibility: Supports a variety of communication protocols and interfaces, which is convenient for users to configure and expand according to actual needs.

Ease of use: Provides friendly user interface and rich diagnostic tools, reducing the difficulty of system configuration and maintenance.

Product Parameters and Specifications Processor: 32-bit RISC processor Clock frequency: 100 MHz Memory: 128MB Flash memory: 256MB Communication interface: RS-232/485, Ethernet, etc.

Input/output interface: analogue input/output, digital input/output Operating temperature: -25°C to +60°C Storage temperature: -40°C to +85°C Relative humidity: 5% to 95% (non-condensing) Protection rating: IP65 Product specification: 300mm x 200mm x 100mm Installation and Maintenance Environmental conditions: Ensure that the module is installed within the recommended temperature and humidity ranges and avoid direct exposure to water, oil, dust or electromagnetic interference.

Power Requirements: Use a stable power supply to avoid damage to the module from voltage fluctuations.

Signal Cable Connection: Connect the signal lines correctly to ensure the accuracy and stability of signal transmission.

Software Configuration: Correctly configure the software parameters of the module according to the system requirements to ensure compatibility with other parts of the control system.

Maintenance and Inspection: Perform regular maintenance and inspection of the module, including cleaning and checking the contact status of the connectors.

Precautions Operator Training: Operators should receive proper operation and maintenance training to avoid malfunctions or safety accidents caused by incorrect operation.

Company Contact:

• Posted By: KONG JIANG

• Phone: wang@kongjiangauto.com

• Address: No1134Jimei North Road, Jimei District, China, XiaMen , China

• Email:

• Website: https://www.chnfcs.com/

• Business Description: We are located in the beautiful Fujian Province of China, with professional products and services and adequate inventory.
  
  Specializing in shipbuilding, chemical, petroleum, storage, natural gas, steel, subway and a series of chemical core equipment products.