Latest Version Volvo Vcads 88890020 For Trucks And Heavy Vehicles - China

Contact email : or-tina@hotmail.

com More details please click :

http: //www.

x431 - us/product.

phpCid_product=583

Volvo 88890020 is the latest Volvo diagnostic

tool for Volvo trucks, buses and other heavy

vehicles.

Volvo 88890020 or Volvo Interface is

developed for Volvo and Mack heavy vehicles

(trucks, buses) and egnines.

Communication

unit enables PC to vehicle communication, the

device connects to the PC via USB cable or by

WLAN using the 802.11 b/g connection

standards.

Before the 88890020 communication

unit can be used, a driver must be installed

on the PC.

In addition, a utility application

(Admin0020) can be used to check the status

of the device and update the firmware if and

when needed.

There are three different ways, described

below, of connecting communication unit

88890020:

Via USB-cable

Connect the communication unit to the

vehicle.

Connect the USB-cable between the

communication unit and the PC.

Select communication unit 88890020 and USB-

cable setting in window Alternative.

Directly to the communication unit

Note: Your PC must have Wireless LAN

802.11b/g and support for 128 bit WEP

(encryption), if it is to be used for direct

communication with the communication unit.

The Panasonic CF29 has this built into the

motherboard.

Additional Wireless LAN cards

will be recommended in the future.

Connect the communication unit to the

vehicle.

Select communication unit 88890020 and Direct

to communication unit in window Alternative.

Security level Directly to the communication

unit

Communication is performed using 128 bit WEP,

Wired Equivalent Privacy.

The WEP-key is

generated automatically and is not seen

during the configuration.

Via an access point

Note: Contact the local IT-support or network

technician before installation.

Connect the communication unit to the

vehicle.

Select communication unit 88890020 and Via an

access point in window Alternative.

Security level Via an access point

There are three alternatives for this:

WEP and MAC-address.

Communication is

performed using 128 bit WEP, Wired Equivalent

Privacy.

The WEP-key is written in during

configuration.

The MAC-address is to be

written into the access point for additional

security.

WPA and PSK.

Communication is

performed via WPA, Wi-Fi Protected Access.

802.1x.

Communication is performed using

standard EAP_MSCHAP v2 - The communication

unit is then treated as a PC and will be

logged on to the network using a username and

password.

Product description for communication unit

88890020 - Communication unit 88890020 has a

number of different coloured LEDs.

These LEDs

show the status of the communication unit and

indicate warnings, etc.

Refer to the table

below for an overview.

VCADS Pro (Vehicle Computer Aided Diagnostic

System and Programming), VTT(Volvo Tech

Tool), RTT(Renault Tech Tool), PTT(Premium Tech

Tool), is the after market tool for

diagnostics, calibration, and programming

support.

This program is used when working on

vehicles with Volvo engine electronics 1992

and later.

This tool enhances the diagnostic

and programming attributes of the vehicle.

Utilizing the J1587/1708 information link.

VCADS Pro has the ability to perform task

such as engine compression test, calibration

of the instrument cluster, and programming of

software and customer parameters.

Also our communication adapter possible to

use with MATRIS – MAchine TRacking and

Information System .

MATRIS –The purpose of

the application is to collect technical

information about VOLVO Construction

Equipment’s products in use and present the

information to the operator, and forward it

to certain sites, as the main office of VOLVO

Construction Equipment.

The information is

accumulated and stored in the ECUs

(processor) of a machine during the life

cycle of the machine.

The process of

collecting information is called reading.

The

processing of the information into compiled

presentation material in the PC gives a

comprehensive understanding about the usage

and the quality of the machines

Datalink interface which produces our company

for "Vcads Pro” working well with all Volvo

trucks produce from 1992 to now days.

Also our datalink adapter

(interface/translator device), (with

different connection cables ) and program

"Vcads Pro” can communicate with trucks,

buses and construction “Volvo” Loaders,

Excavators, Scrapers (look for full

inventory).

Feel free to contact us with all your questions

Company Contact:

• Posted By: X431 Online Shop Electronics Co ., Ltd

• Phone: 075529071623

• Address: Ban Tian, Shenzhen, GuangDong, China , Shenzhen , China

• Email:

• Website: http://www.x431.us

• Business Description: x431, on line exporter featuring China auto diagnostic tools for Do It Yourself and professional automotive mechanics, for online shop owners wholesale dropship at very low price.
  
  x431 ship its tools all over the world.
  
  x431 ever lasting promise is "Top Quality, Good Service, Competitive Price".