Fuel Injection Hose As - China

Tube of fuel injection hose is lined with a tough layer of

fluoroelastomer, which is an excellent elastomer of low

permeation, heat resistance (400��F/200 ��C), high

chemical stability, and anti-aging ability and so on.

Exposed to diesel or biodiesel, fluoroelastomer shows an

exceptional resistance, while normal injection hose will be

woken.

An aramid spiral reinforcement protects the hose body

from crushing or kicking.

The ideal working temperature of

the abrasion-resistant cover ranges from -34 to 135��C

(-29 to 275 ��F).

Made of special material, this cover

shows a good resistance against ozone, sun degradation,

acrid, weathers or other petroleum products.

Applied to auto and truck fuel injection systems for the

transfer and delivery of gasoline, ethanol extended

gasoline, oxidized sour gas, diesel fuel, biodiesel,

lubrication oil.

OD (in) OD (in) Lengths (in) Working Pressure (PSI)

Burst Pressure (PSI) Min Bend Radius (in) Vacuum HG

(in) Weight (lb/ft)

1/4 0.5 1.5 max 100 900 0.75 24 0.1

1/4 0.5 25 max 100 900 0.75 24 0.1

5/16 0.56 1.5 max 100 900 0.84 24 0.12

5/16 0.56 25 max 100 900 0.84 24 0.12

3/8 0.63 1.5 max 100 900 0.94 24 0.14

3/8 0.63 25 max 100 900 0.94 24 0.14

Company Contact:

• Posted By: China Castle Fuel Hose Company

• Phone: 8643666659

• Address: Development zones, Hengshui, Hebei, China. 053600, hengshui , China

• Email:

• Website: http://www.fuelhose.org

• Business Description: With the development of economy, the requirement of fuel has been
  
  continuously increasing.
  
  Engineered to convey fuel oils, all kinds of
  
  oil hoses are manufactured by large or small enterprises to meet with
  
  the huge hose market.
  
  As a member of hose manufactures, China Castle
  
  Fuel Hose Company has been engaged to provide fuel hoses with high
  
  quality and low cost.
  
  Our main products includes biodiesel delivery
  
  hose, fuel oil delivery hose, diesel delivery hose, fuel transfer hose,
  
  petrol delivery hose, petroleum tank truck hose and fuel injection hose.
  
  As a result of high quality and the most competitive price, our fuel
  
  hoses are becoming popular both at home and abroad.
  
  As each fuel oil has its special component, no hose is compatible with all fuel oils.
  
  Broadly speaking, high oil resistant NBR is an ideal material of the tube for the transfer and delivery of conventional fuels like diesel and gasoline and new biofuels like biodiesel and ethanol blends, for its good compatibility with most oils and petroleum based products.
  
  However, NBR is not so compatible with aromatic hydrocarbons.
  
  When used to carry aromatic hydrocarbons, NBR tube has a strict requirement of its concentration.
  
  The body of the hose is designed as a supporting structure of the hose.
  
  Our fuel hoses usually uses yarn, fabric, wire, polytene or any two of these.
  
  This construction provides protection from kicking, crushing or cutting.
  
  Cover is the only part exposed to the environment and protect the hose from damaging from the outer environment.
  
  Synthetic rubber is usually used, for it has high oil resistance, abrasion, heat, ozone, sun degradation, cut or other destructive damages.