Epoxy Resin Glue For Led Channel Letter - China

Item No.

: 312A/ B- 8

Specification: 20kg/ set

[ Main Component]

A component is resin, B component is curing agent.

The main agent 312A - 8 Curing agent 312B- 8

Color:

Specific gravity: 1.15 0.96

Viscosity 25°C : 2000- 4000CPS 100MAX

[ Feature]

Epoxy resin 312 AB- 8 is based on the room temperature, having the features of:

( 1) good flowing property

( 2) natural defoaming

( 3) anti- yellowing property

( 4) high transparency without ripples

( 5) bright surface, suitable for curing at room temperature or high temperature

[ Scope Of Application]

The products of this series are widely used for LED luminous letters, picture frames, handicrafts, glue, badges, high- grade resin letters and the insulation of other electronic components , moistureproof, potting, confidential encapsulation, etc.

[ Conditions of usage]

1) Mixing ratio: A: B = 100: 33( weight ratio) - - >3: 1

2) Hardening conditions: 25°C ×8H to 10 H or 55°C ×1.5H ( 2 g)

3) Usable time: 25°C ×40min ( 100g)

[ Using Method]

1 - Working environment: The container of holding glue please keep clean, A and B part should be in accordance with the weight ratio, weigh accurately , mix fully along the container wall by clockwise and use after 3 to 5 minutes .

2 - According to the operational time and dosage of mixing rubber, avoid wasting.

When the temperature below 15°C , please put A glue to glue again after warm up to 30°C , easy to operate, ( a glue will be thicken when low temperature ) ; Must be sealed lid after use, avoid product rejection caused by moisture absorption.

3 - When the relative humidity is more than 85% , the curing surface easy to absorb moisture in the air, form a layer of white mist, so when the relative humidity is more than 85% , is not suitable for room temperature curing, suggest to use the heat curing.

[ Warning]

1 - The operating environment should be ventilative and should keep away of the fire.

Closely sealed after use.

2 - Avoid the glue contact the skin and the eye, if contacts the skin, with soap and clear water cleaning, if touches the eye carelessly, uses the clear water to flush and to see a doctor immediately.

3 - If the liquid cement has the stratification when used for a long time, use after the agitation evenly, do not affect its product quality

4 - Take strict precautions against touching by the kids and entering into the mouth.

5 - Please make a trial to avoid usage mistakes before application.

[ Storage And Packing]

Stock the products in the air- tight seal at the temperature of 25°C .

The shelf life is half a year.

It is available to use based on passing of the test if being beyond the shelf life.



It’s no problem that you can buy some samples at the first time.

Company Contact:

• Posted By: Shenzhen Jinhua Electronic Materials Co., Ltd.

• Phone: 15706687371

• Address: China Guangdong Shenzhen Baoan, Shenzhen , China

• Email:

• Website: http://www.jhjiaoshui.com

• Business Description: we're manufacturer of producing Epoxy AB glue, resin glue, crystal glue
  
  and so on.
  
  Shenzhen Jinhua Electronic Material Co., Ltd. is high tech
  
  enterprises professional engaged in epoxy resin AB glue and secondary
  
  processing of curing agent.
  
  And it is also one of the most professional,
  
  the most competitive epoxy resin suppliers, it is professional company
  
  for research development, production, sales and service.
  
  It do its best
  
  to provide high additional value of epoxy glue, crystal glue for
  
  customers.
  
  It has a factory with more than 2000 square meters , follow
  
  the development trend of era, it committed to the research and
  
  development of epoxy resin AB glue, the introduction of foreign advanced
  
  equipment, and it refer to the master formula at home and abroad,
  
  cooperate with the USA, Japan, Germany and other places of high
  
  performance materials.
  
  Not only update constantly , but also accelerate
  
  product upgrading to meet the needs of rapid economic development.