Silicone Rubber For Concrete Molds - China

Silicone rubber for concrete molds applications

1 - Silicone rubber is mainly used for concrete statue , concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products .

Silicone rubber for concrete molds features

Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A°after curing with features -

(1) high tensile & tear strength

(2) high duplication times

(3) Low linear shrinkage

(4) resistance to high-temperature

(5) Low shrinkage and non-deformation

(6)resistance to acid-alkali and expansion

Silicon rubber for concrete molds operation instructions

Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .

Shelf life for silicon rubber concrete molds

10~12months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for concrete molds

1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum

Company Contact:

• Posted By: HONG YE CHEMICAL PLANT CO; LTD.

• Phone: 8675589212365

• Address: Building 4, No.6 Laiying Road, Xin Sheng Long Shan, Shenzhen , China

• Email:

• Website: http://www.szrl.net

• Business Description: Hong Ye Jie Technology Co., Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber.
  
  It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.