Spray Dryer In Chemical - China

spray dryer in chemical

PRINCIPLE

1 - A menu driven microprocessor controller allows the selection of inlet temperature, airflow, automatic de- blocker frequency and pump speed.

The controller features an RS 232 output for connection to a PC or datalogger and software allows the control and monitoring of all functions and printing of results.



2 - The self- priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber.

At the same time an integral compressor pumps air into the outer tube of the jet which causes the liquid to emerge as a fine atomised spray into the drying chamber.

3 - Heated air is blown through the main chamber evaporating the liquid content of the atomised spray.

The solid particles of the material, which are normally in a free flowing state, are then separated from the exhaust air flow by a cyclone and collected in the sample collection bottle.

The exhaust airflow is directed through a flexible 60 mm diameter hose direct to atmosphere or to an existing extraction system.

ADVANTAGES

1 - Two modes of run: Automatic- mode, and Eye- monitored mode for the purpose of easily controlling experimental process .

PLC controller, LCD touch panel control fascia with flow path of system.

Using proface touchable interface display operation, operator can control temperature, airflow volume, air pressure, pump speed and de- blocker frequency.

2 - Spray chamber, cyclone separator, receiving tank are all made of Borosilicate glass which can resist strong acid/ alk li, high temperature.

It can work in a no- pollution and stable environment, and the whole process can be inspected.

All the spare parts are easy to install and wash.

3 - Made of SUS- 316 Stainless steel.

Easy operating.

4 - assure accurate temperature control and easy parameter adjusting.

5 - A filter has been equipped to the inlet unit to prevent the sample from contamination .

6 - The self- priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber to avoid secondary pollution.

.

To make sure the process conducted steady and smoothly, magnetic agitator is optional to make the solution well mixed.

7 - Narrow size distribution of particles.

8 - Automatic de- blocking device prevents the nozzle from becoming blocked and variably controlled.

9 - The air compressor is no oil and don’t pollute compress air.

The power from receiving tank has a good flow.

The sound is low than 60db, and following the GMP understands.

10 - Supplied complete and ready for most spray drying applications.



11 - Automatic de- blocking device prevents the nozzle from becoming blocked and variably controlled.

12 - Equipped with air filter to remove and collect fine particle s in exhausted air.

TECHNIACL INFORMATION

1 - Two modes of run: Automatic- mode, and Eye- monitored mode for the purpose of easily controlling experimental process .



2 - Air inlet temperature range 30ºC to300ºC.

3 - Air outlet temperature range 30ºC to 140ºC.

4 - Evaporation rate of water at inlet temperature of 250ºC using Standard: Approximately 1500 ml/ hour~ 2000ml/ hour.

5 - Max.

Sample feed: 2000ml/ h.

6 - Min.

Sample : 30mL.

7 - Standard with 0.7 mm jet and other sizes are available as accessories.

8 - Power: 3.5KW AC220V .

9 - With cooling device for temperature- sensitive material ( optional) .

APPLICATIONS

Spray drying can be used in a wide range of applications where the production of a free- flowing powder sample is required.

This technique has successfully processed materials in the following areas:

Beverages • Flavours and Colourings • Milk and Egg Products • Plant and Vegetable Extracts • Pharmaceuticals • Heat Sensitive Materials • Plastics • Polymers and Resins • Perfumes • Ceramics and Advanced Materials •

Soaps and Detergents • Blood • Dyestuffs • Foodstuffs • Adhesives • Oxides • Textiles • Bones, Teeth and Tooth Amalgam and many others.

Most solutions and suspensions can be spray dried providing that the resulting product has the characteristics of a solid material.

Company Contact:

• Posted By: Shanghai Pilotech Instrument&Equipment Co.,Ltd

• Phone: 13381632669

• Address: No. 86 Rd. yuxiu,Songjiang District, Shanghai , China

• Email:

• Website: http://www.pilotplant.cn

• Business Description: Shanghai Pilotech Instrument and Equipment Co., Ltd is a high tech corporate enterprise specialized in manufacture and whole plant installation of laboratory research equipment and processing equipment for dairy products, juice, jam, tea drinks and lycopene.